Hammer Mill for Wood and Straw With Cyclone

Raw material of hasmmmer mill

A.Requirment of the raw material :

1. For using material of two or more types, It should be mixed in suitable form.

2. the feed material should be even

3. different raw material should choose different machines

4. To ensure security, do not put the nails into the wood crusher

B.raw material could be :

 Any types of Agro-forestry waste such as tree branches, wood chips, soybean stalks, broomcorn stalks, cotton stalks, rape stalks, peanut plants, sunflower stalks, bamboo saw dust, bagasse, wood chips, rice husk, coffee husk,coir pith, jute sticks, groundnut shells, Bamboo , wood , strawdust, mustard stalk and cotton stalks .etc

Technical datas of hammer mill

Our company can produce the following type of Chinahot seal 15kw 400-500kg/h hammer mill feed grinder for wood chips, the customers can select one accroding to their capacity and raw materials. Any questions, pls contacr me freely.

Brief introduction of  hammer mill 

China hot seal 15kw 400-500kg/h hammer mill feed grinder for wood chips is endowed with many advantages compared to other kind of crushers such as large reduction rate, high production capacity, even crushed effects, low energy consumption and simple structure, etc. This China hot seal 15kw 400-500kg/h hammer mill feed grinder for wood chipps can be used to crush hard, soft and weakly corrosive materials. After crushing, raw materials are uniform and with proper moisture content to meet further processing.

Working principle of  hammer mill 

This China hot seal 15kw 400-500kg/h hammer mill feed grinder for wood chips is mainly component of casing, rotor, hammers and bars. The case is divided into two parts: up and down, which is connected by welding the cut steel; other parts are connected by screws. The one inside of case is high manganese steel lining board, which is easy to change when wore out. There are several hammers in the spindle, which make up of rotor together with turntable and wear hammer shaft. The China hot seal 15kw 400-500kg/h hammer mill feed grinder for wood chips works through motor and V-belt to drive spindle and rotor rotating, so that centrifugal force producing by the hammer rotating spread out. Then when the big material was put into crushing chamber, it was crush by the high speed hammer. Afer those process, the standard material was screen out by down bar and non-standard one was left on the crushing chamber and crush again. In order to avoid clogging, humidity of crushed material should below 10%-15%.  

Structures of hammer mill 

 The electric motor of China hot seal 15kw 400-500kg/h hammer mill feed grinder for wood chips drives the rotor and the rotor moves, making the hammer rotate in high speed. The materials are crushed in the crusher by the rotated hammer. The end products come out via the strips of the screen under the machine. The size of the granularity can be adjusted by changing the gap among the screen strips. The advantages of the machine are simple in operating, high in productivity, and very low investment cost. 

Final products of  hammer mill 

1.The particle size of this China hot seal 15kw 400-500kg/h hammer mill feed grinder for wood chips is small, and can be crushed directly without drying by sun or dryer machines.

2. The whole wquipment only use a motor driving.

3.This hammer mill crusher machine has simple structure and compact decoration.

4. Cheap cost, stable quality, less energy consumption, and high efficiency.The final wood chips could be used for bwiquette or pellet making.

Gongyi Xiaoyi Mingyang Machinery Plant is one of the largest and earliest manufacturers of the biomass energy equipment ( biomass briquette machine line, charcoal making production line, wood pellet production line and the related machinery).
* one of the largest and earliest manufacturers of the charcoal making machine, biomass briquette machine and wood pellet production line in China with 30 years experience.
* Covered an area of 12000 square meters, currently has more than 120 employees, divided to 7 department.
* Designed and produced 6 production line, more than 150 kinds of machines, awarded 10 patents in China.
* Products are widely accepted in both domestic and world market ,more than 150 countries.
* The company enlarged for building one experimental Center of high-tech automtaic production equipment to meet the market requirement.
* Professional after-sales service team to be able to handle client issues in a timely manner.
* high level standard workshop, advanced producing equipment, Experienced technicians, fine workmanship with 30 year working experience.
* stock for based goods, accessories in stock to meet you need,stocked your samples and all the details of the goods of the next order.
* strict inspection personnel and process, and we are strictly ensure the quality of the international standard.
* We have the test center of the machine, Each machine will running before delivery.
* recommend clients for free, offer the layout drawing and the profit table and install video and free stuff training.

We have the professional and experienced team to assist you;  If there is any questions, please feel free to contact me, I am always here online waiting for your calling, also click the name card to get more information;

Sales manager: Bella Ren

Phone: 0086-15039052281

Whatsapp: 0086-15039052281

Wechat: 0086-15039052281

Skype: bella616919