Three Phase Three Wire Type Mitsubishi Driver QH42P With Intelligent

Three phase three wire type.
Number of measuring circuits: 1 circuit.
Measurement items: power consumption (consumption and regeneration), current,
voltage, power, power factor, etc. it is a product group of elevtric energy
measurement modules that can simply measure a variety of energy information.
With only one module, you can measure various detailed information related to
power (consumption and regeneration), reactive power, current, voltage, power,
power factor and frequency. Mitsubishi 1 / O module user manual.
The minimum and maximum values can be continuously monitored without ladder
program, and two types of upper / lower limit alarm qh42f can be executed. The
power used by the output device can be measured only during the on state.
Therefore, the power during the operation of the equipment and the power in the
beat unit can be obtained. Using 3-phase 3-wire products in one slot can
measure up to 4 circuits, and using 3-phase 4-wire products can measure up to 3
circuits
Therefore, through multi circuit products, electric energy measurement can be
implemented in a small space. Mitsubishi / O module user manual. For example,
one module can be used to measure other loads from the control panel trunk
line.
In addition, GX works2 (version 1.90u and higher) can be used to easily set
parameters and bidirectional controllable brick output; 32 o'clock. Rated
current and voltage: AC100 ~ 240V_ 0.6a/1 point, 2.4a/1 public end, 8:1 public
end Mitsubishi / O module user manual. Response time: 1ms + 0.5 cycle.
External wiring connection mode: 38 point terminal block (terminal block is
sold separately). Replacement model: ay23, output: 2 channels,
Input (resolution): 0 ~ 4000: - 4000 ~ 4000:0 ~ 12000-12000 ~ 12000: - 16000 ~
16000 output: DC-10 ~ 10V: dc0 ~ 20maqh42p user manual. Conversion speed: 80us
/ 1 channel. 18 point terminal block.
Transformer isolation between power supply and output. High insulation strength
and withstand voltage.
It can isolate electrical interference, such as current and noise. Standard
analog input module. Isolated analog input module. No external isolation
amplifier is required.
When the inter channel isolated analog quantity module is not used.
Qh42p user manual when using inter channel isolated analog module. Expand the
possibility of control with intelligent functions.
Provide various analog modules, which is an ideal choice for process control
applications. It can also meet the needs of high-speed and high-precision
control.
It is most suitable for analog modules in the field of high-speed conversion
control,
Qh42p user manual for a variety of analog-to-digital and digital to analog
conversion module products can be provided
These modules have various functions and achieve maximum flexibility when
connecting devices.
It can meet the needs of high-speed conversion such as frequency converter
control. Various modules with excellent performance
Meet various control requirements from analog quantity to positioning.
Q series module products include a wide variety of / 0, analog and positioning
function modules.
It can fully meet the input and output of switches and sensors, the control of
temperature, weight, flow, motor and driver, and the positioning of high-
precision control in the future! Control requirements in various fields
It can also be combined with CPU module to realize appropriate control. Input
voltage range: AC100-240V. Output voltage: DC5V Output power supply: 2A Ultra
thin power supply. Simplify program debugging
The software component test function with execution conditions can be used to
change the software component value to the user specified value at any step of
the program.
In the past, when debugging a specific circuit program section, it was
necessary to add a program for setting soft components
At present, by using this function, specific loop program segments can perform
actions independently without changing the program. Large, there is no need to
change the program for debugging in the single, the debugging operation is
simple, and the key data is automatically backed up
Automatically save the program and parameter files into the program memory
(flash ROM) without using the backup battery, so as to prevent the program and
parameters from losing the qh42p manual due to forgetting to replace the
battery. In addition, important data such as software component data can be
backed up to standard ROM to avoid planned downtime during long holidays,
These data are lost due to battery depletion. Mitsubishi / / O module user
manual. The next time the power is turned on, the backed up data will be
restored automatically. Through the extension of software components, it is
more convenient to create programs.
The software component can be extended to 60m bits at most