Zhuoji composite polymer CNC machine equipment - diamond face Angle cutting surface grinding and polishing machine

Zhuoji gem cutting surface Angle grinding and polishing CNC machine

No. 810501338 Model XX-5M

The automaton is made up of 5 stepping motors. The functions of each motor are as follows:

Y1 motor function: responsible for the plate position (such as octagonal hand or manipulator)

Y2 motor function: responsible for the Angle or strength of downward sand beating

Y3 motor function: responsible for moving the head to the left or right, that is, when playing sand adjustment,

Y3 moves the nose to the disc side to work

Y4 motor function: responsible for lifting and lowering (such as the lifting platform of octagonal hand)

Function of Y5 motor: responsible for paddling sand and paddling distance

Input board position -- Y1 parameter (start input with y1 value on board 01)

Aligning stone -- Y1 parameter (overall aligning)

Increase and decrease height -- Y4 parameter (height)

Adjust the yaw Angle -- Y2 parameter (Y2 height from the disc)

Adjust the height again --y4 parameter (height)

Overall increase and decrease of strength -- Y2 parameter (overall increase and decrease of strength of Y2)

Polishing intensity -- Y2 parameter (note: Polishing intensity starts from 80)

Increase and decrease the strength of each plate separately -- parameter Y2 (start looking for the strength of the 1st plate)

Reverse (cross)

Y3 // Y5 mode: Positive and negative turn (row), dot sand (dot)

Stroke long, stroke short distance -- Y5 parameter (position of Y5 dial)

Fast, Slow speed -- Speed setting (Y5 speed)

Speed: speed setting (V2 low-speed speed), Y2 parameter (Y2 low-speed height)

Polishing parameter operation function

Y3 parameter (Y3 position: adjust 7000 or so)-- test Y4 parameter (Y4 height)-- test

Y2 parameter (y2 height from disk)-- adjust Y4 parameter (y4 overall rise and fall)-- adjust long and short distance

Y5 parameter (Y5 sliding distance) -- Increasing force Y2 parameter (overall increase or decrease of force y2)

The number of layers can be 1-10 layers, each layer has 16 boards

Suitable for: corundum, spinel, ruby, turquoise, olivine, topaz/topaz, sapphire, tourmaline/tourmaline, garnet, agate, amber, tiger's eye, zircon, glass

Can process shape: round, oval, square, rectangle, triangle, pear, heart, water drop, horse eye shape, plum shape, star, leaf, axe shape, three-dimensional beads, three-dimensional water drop, three-dimensional triangle square ring face, egg ring face, pear ring face, bracelet, intermediate finger, flat bead, round bead and so on

Accessories: Diamond forming disc/polishing powder

Technical parameters:

Input voltage :AC220V

Motor power: 250W

Main speed: 2800r/min

Dimensions: length 560mm× width 800mm× height 1390mm

Maximum loading mill size :8 inches (200mm)

Maximum loading and throwing disc size :8 inches (200mm)

Can switch English system