Home > Products > Curtis Controller Assy > Curtis controller 1266A-5201 car electric conversion kit for golf carts
Curtis controller 1266A-5201 car electric conversion kit for golf carts
Negotiable
1 (Min. Order)
- T/T Credit Card
You May Like
-
48v 72v 80v dc 1221M-6701 with original curtis controller for eve conversion kit
-
Electric Sightseeing Bus 1221M-6701 Controller Kits work for 72V 6.3kw DC Motor
-
1204M-5203 Controller eve conversion kit for electric golf car
-
Curtis Motor Controller 1205m-6b402 400a for Electric Golf Cart
-
Curtis 1205M-6B402 Controller Assembly eve conversion kit for golf car
-
1268 curtis forklift controller assembly with contactor 36V 48V motor vehicle controller Programmable
Product Description
Product Description
Specifications:
* Proposed SepEx motor power rate: * 36V system: ≤ 3.8 kW
* 48V system: ≤ 4.7 kW
* simple motor connecting labels on assemblage
* easy installation with components mounted on a heat-sink aluminium alloy installation plate
* foot pedal accelerator (throttle), pre-wired for assemblage
* simple plug-in connctors
* Easy to install (1266A / 1266R CURTIS DC SepEx Controller Assemblage Installation Instruction (PDF format))
This 1266A-5201 controller assemblage is a completed electric vehicle DC Series Motor control system. The assemblage includes:
* controller
* main contactor
* fuses
* heat-sink aluminium alloy installation plate
* foot pedal accelerator (3-wire potentiometer throttle JSQD-DWK-003D)
* plug-in connectors
* installation (bolts, washes and nuts) kit Included
* harness (optional. If you need the harness, please check the speed sensor connector form of your motor.)
* Proposed SepEx motor power rate: * 36V system: ≤ 3.8 kW
* 48V system: ≤ 4.7 kW
* simple motor connecting labels on assemblage
* easy installation with components mounted on a heat-sink aluminium alloy installation plate
* foot pedal accelerator (throttle), pre-wired for assemblage
* simple plug-in connctors
* Easy to install (1266A / 1266R CURTIS DC SepEx Controller Assemblage Installation Instruction (PDF format))
This 1266A-5201 controller assemblage is a completed electric vehicle DC Series Motor control system. The assemblage includes:
* controller
* main contactor
* fuses
* heat-sink aluminium alloy installation plate
* foot pedal accelerator (3-wire potentiometer throttle JSQD-DWK-003D)
* plug-in connectors
* installation (bolts, washes and nuts) kit Included
* harness (optional. If you need the harness, please check the speed sensor connector form of your motor.)
Product Paramenters
For the buyer without CONTROLLER APPLYING EXPERIENCE, please consult your cart/motor dealer and read carefully the CURTIS
1266A-5201 Controller Manual before making the purchase.
We may reprogram the controller for adapting itself to your vehicle's specification. You may send us the list of parameters to be
modified (example: for setting the speed limit, we may need to know the tire diameter, gear ratio, number of magnetic poles in the
speed sensor magnet and speed expectation). There is no extra cost for reprogramming the controller.
Overview:
CURTIS 1266A controllers are separately excited motor speed controllers designed for use in a variety of transport vehicles. These
programmable controllers are simple to install, efficient, and cost effective. Typical applications include golf carts and small
utility vehicles.
The 1266A controller offers smooth, silent, cost effective control of motor speed and torque. The speed sensor input allows
superior closed-loop control for regulating vehicle speed. Unique braking parameters allow simple, intuitive deceleration tuning.
A full-bridge field winding control stage is combined with a half-bridge armature power stage to provide solid state motor
reversing and regenerative braking power without additional relays or contactors.
Key Features:
* CURTIS Model: 1266A-5201 * Norminal Battery Voltage (Volts): 48V (default setting) or 36V
* Amarture 2 Minute Current Rating (amps): 275
* Field 2 Minute Current Rating (amps): 20
* PWM operating frequency: 16 kHz
* Electrical isolation to heatsink: 500 V ac (minimum)
* Aluminum alloy installation panel size: * L270 mm x W201 mm x H8 mm
* Installation dimensions (holes): 250 mm x 184 mm
* Assemblage Net Weight: 4.6 kg (with foot pedal throttle)
* Package Weight: 6.4 kg (reinforced carton package, safe for international shipment)
Features Include:
* Regenerative braking, providing longer operation on a single battery charge and reducing motor brush wear and motor heating
* Adjustable brake rates, for smooth pedal-release braking
* Two user-selectable vehicle operating personalities, with vehicle top speed controlled and limited in each mode
* Motor parameters are programmable to match the characteristics of the specific motor being used
* Vehicle speed control is enhanced through feedback from a Hall effect speed sensor
* Anti-rollback function, providing improved control when throttle is released on hills
* Anti-stall function helps prevent motor commutator damage
* High pedal disable (HPD) and static return to off (SRO) interlocks prevent vehicle runaway at startup
* Complete diagnostics through CURTIS 1313-4331 Handheld Programmer or 1314 PC Programming Station and through the built-in
Status LED, for quick and easy testing, diagnostics, and parameter adjustment
* WalkAway™ braking feature limits any stopped or key-off rolling to a very low speed
* Auxiliary driver can be programmed for either an electromagnetic (EM) brake or a WalkAway™ relay
* Coil driver provides adjustable pull-in and holding voltages to WalkAway™ relay or EM brake
* Two fault outputs provide diagnostics to remotely mounted displays
* Reverse signal driver provides a low signal any time the vehicle is traveling in reverse
* Driver outputs are short circuit protected and provide built-in coil spike protection
* Brake/Drive Interlock meets ISO stopping distance requirements
* Warning buzzer sounds steady in reverse, intermittent during WalkAway™ braking
* Splash resistant plastic cover
* Meets or exceeds EEC fault detect requirements
1266A-5201 Controller Manual before making the purchase.
We may reprogram the controller for adapting itself to your vehicle's specification. You may send us the list of parameters to be
modified (example: for setting the speed limit, we may need to know the tire diameter, gear ratio, number of magnetic poles in the
speed sensor magnet and speed expectation). There is no extra cost for reprogramming the controller.
Overview:
CURTIS 1266A controllers are separately excited motor speed controllers designed for use in a variety of transport vehicles. These
programmable controllers are simple to install, efficient, and cost effective. Typical applications include golf carts and small
utility vehicles.
The 1266A controller offers smooth, silent, cost effective control of motor speed and torque. The speed sensor input allows
superior closed-loop control for regulating vehicle speed. Unique braking parameters allow simple, intuitive deceleration tuning.
A full-bridge field winding control stage is combined with a half-bridge armature power stage to provide solid state motor
reversing and regenerative braking power without additional relays or contactors.
Key Features:
* CURTIS Model: 1266A-5201 * Norminal Battery Voltage (Volts): 48V (default setting) or 36V
* Amarture 2 Minute Current Rating (amps): 275
* Field 2 Minute Current Rating (amps): 20
* PWM operating frequency: 16 kHz
* Electrical isolation to heatsink: 500 V ac (minimum)
* Aluminum alloy installation panel size: * L270 mm x W201 mm x H8 mm
* Installation dimensions (holes): 250 mm x 184 mm
* Assemblage Net Weight: 4.6 kg (with foot pedal throttle)
* Package Weight: 6.4 kg (reinforced carton package, safe for international shipment)
Features Include:
* Regenerative braking, providing longer operation on a single battery charge and reducing motor brush wear and motor heating
* Adjustable brake rates, for smooth pedal-release braking
* Two user-selectable vehicle operating personalities, with vehicle top speed controlled and limited in each mode
* Motor parameters are programmable to match the characteristics of the specific motor being used
* Vehicle speed control is enhanced through feedback from a Hall effect speed sensor
* Anti-rollback function, providing improved control when throttle is released on hills
* Anti-stall function helps prevent motor commutator damage
* High pedal disable (HPD) and static return to off (SRO) interlocks prevent vehicle runaway at startup
* Complete diagnostics through CURTIS 1313-4331 Handheld Programmer or 1314 PC Programming Station and through the built-in
Status LED, for quick and easy testing, diagnostics, and parameter adjustment
* WalkAway™ braking feature limits any stopped or key-off rolling to a very low speed
* Auxiliary driver can be programmed for either an electromagnetic (EM) brake or a WalkAway™ relay
* Coil driver provides adjustable pull-in and holding voltages to WalkAway™ relay or EM brake
* Two fault outputs provide diagnostics to remotely mounted displays
* Reverse signal driver provides a low signal any time the vehicle is traveling in reverse
* Driver outputs are short circuit protected and provide built-in coil spike protection
* Brake/Drive Interlock meets ISO stopping distance requirements
* Warning buzzer sounds steady in reverse, intermittent during WalkAway™ braking
* Splash resistant plastic cover
* Meets or exceeds EEC fault detect requirements
related products
our factory
Our Company
Hefei Huanxin Technology Development Co., Ltd. has been devoting ourselves to developing and manufacturing and other since 2004.
We are located in Hefei, Anhui Province, with convenient transportation access. We employ over 101 - 200 People staff members. We
have achieved great improvement since our company was founded in 2004.
We abide by the motto of Firstclass quality, Reasonable price, Best service and Professional product support.
We are located in Hefei, Anhui Province, with convenient transportation access. We employ over 101 - 200 People staff members. We
have achieved great improvement since our company was founded in 2004.
We abide by the motto of Firstclass quality, Reasonable price, Best service and Professional product support.
Packing & Delivery
Exhibition
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Sample needs 3-5 days.
Q3. Do you have any MOQ limit?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea
shipping also optional.
Q5. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our
sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 1 year warranty to our products.
Q8: How to deal with the faulty?
A: Our products are produced in strict quality control system and the defective rate will be less
than 0.2%
Please feel free to contact us if you have any problem!
Contact Us
- Hefei Huanxin Technology Development Co., Ltd.
Product Categories
New Products
-
Electric Forklift Controller Assembly DC Brush Motor Controller Assembly
-
Electric Golf Cart Kits 1266A-5201 Controller Assembly
-
Curtis controller kit dc 48v 1205M-5603 Motor Controller work with ZQS48-4.0C DC Motor for electric cart
-
Electric Sighting Bus Controller Assembly with Dust Cover
-
1268-5403 400A Curtis Controller Kits from Chinese Factory
-
1221M-6701 Controller Kits 550A 48V-60V for Electric Forklift
-
Curtis 1205M-6B402 Controller Assembly 400A 48V
-
1232SER-5422 48V 400A controller assemblage for lifted golf carts
-
Retrofit Car Parts 15kw motor Controller 1234SER-6422 48-80V 350A Motor Controller assembly
-
CURTIS 275A 1204M Controller Assembly 36V / 48V
-
Electric car conversion assembly , Electric Golf Cart Parts , DC Motor Speed Controller Kit
-
1243-4320 DC Motor Controller Assemblage for Golf Carts
-
Curtis 1266 SepEx Controller Assembly with DC Contactor
-
America Curtis Controller Assembly 1268-5403 DC conversion Kits for golf cart club car
-
Curtis 1232SER-5422 Controller USA Curtis controller kits
-
Curtis 1232ser-5422 motor controller assembly 48v 400a
-
Curtis 1234ser-6422 AC Motor Controller Assembly Kits
-
36V 48V 275A DC Motor Controller Assy 48v 4KW EV Conversion Kits
-
Speed controller 1205M Curtis 48V Controller foot pedal contactor
-
Curtis Motor Controller Assembly 36V/48V For Golf Cart 1204M-5305
-
car electric conversion kit with curtis 1266a-5201 dc controller
-
1244-5561 controller assemblage 48V with Contactor
-
Curtis DC controller 1204M-5305 eve conversion kit for golf cart club car
-
Servo Motor controller Driver eve conversion kit for golf cart motion
Popular Searches
- 1238-6501 curtis controller
- curtis controller 1268-5403
- ac motor control
- controler ebikes
- cart control
- dc controls
- lathe speed controler
- pwm for hho
- 1268-5403 curtis controller
- 1266-5201 curtis controller
- agv controller
- separately excited
- at motor controller
- abbs motor controller
- acs motor controller
- amplify motor controller
- armed motor controller
- brushless and sensorless controller
- bipolar stepper motor controller
- brushless controler 72v
- controler for electric motor
- controler 60v
- car electric controler
- curti
- curties
- dc controlers
- dc control
- electrical vehicles motor dc controler
- ford cruise control
- bc motor controller
Recommended Products
- ABB Soft starter PSTB PSTX PSE PSR300/370/470/570/720/840/1050
- Parker AC890 SD seriesIntegrated frequency converter 890SD-433105F2-B00-1A000 servo drive
- Parker SSD AC890 series AC Variable Frequency Drives 890CD-531200B0-000-1A000 Servo driver
- Parker SSD AC890 series AC Drives 890CD-531200B0-000-1A000 Complete models, welcome to inquire
- Parker SSD AC890 series AC Drives 890SD-232110B0-B00-1A000 The models are complete, welcome to inquire.
- Parker SSD AC890 series AC Drives 890CD-231300B0-000-1A000 AC Variable Frequency Drives
- Parker SSD AC890 series AC Drives 890SD-433145F2-B00-1A000 AC Variable Frequency Drives
- Parker SSD AC890 series AC Drives 890SD-531200B0-B00-1A000 AC Variable Frequency Drives
- Parker SSD AC890 series AC Drives 890SD-531200B0-B00-1A000 AC Variable Frequency Drives
- Parker SSD AC890 series AC Drives 890CD-531200B0-000-1A000 AC Variable Frequency Drives
- Parker SSD AC890 series AC Drives 890CD-532450D0-000-1A000 AC Variable Frequency Drives
- Parker SSD AC890 series AC Drives 890CD-532450D0-000-1A000 Complete models
Find Similar Products By Category
- Auto, Motorcycle Parts & Accessories > New Energy Vehicle Parts & Accessories > Motor Controller
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Hefei Huanxin Technology Development Co., Ltd.
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
sales
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile