Home > Products > Curtis Controller > 36v 48v 450a Curtis 1236E-5421 Motor Controller part for eve conversion kit for electric golf car club car
36v 48v 450a Curtis 1236E-5421 Motor Controller part for eve conversion kit for electric golf car club car
Negotiable
1 (Min. Order)
- T/T Credit Card
You May Like
-
36v 48v 350a Curtis AC controller programmable eve conversion kit 1234-5371 for electric golf car club car
-
programmable eve conversion kit in stock Curtis ac controller 1232E-2321for electric vehicle
-
Golf Cart Accessories curtis controller 24V 180A 1232E-2321 for electric buggy
-
curtis dc controller 36v 48v 400a 1268-540 for golf cart eve conversion kit
-
Popular curtis ac controller 48v 400a 1232SER-5422 for electric golf cart
-
600w 700w ac controller curtis ac 1232ser-5422 for golf cart eve conversion kit
Product Description
Product Description
Overview:
CURTIS 1236 AC induction motor controllers deliver smooth power unlike any previous vehicle control system. They provide
unprecedented flexibility and power through inclusion of a field-programmable logic controller embedded in a state-of-the-art
motor controller.
Specifications:
* PWM operating frequency: 15 kHz
* Electrical isolation to heatsink (min.): 500 VAC
* PWM operating frequency: 10 kHz
* Maximum encoder frequency: 15 kHz
* Maximum controller output frequency: 300 Hz
* Heatsink overtemperature cutoff: linear cutback starts at 85°C; complete cutoff at 95°C
* Heatsink undertemperature cutoff: complete cutoff at -40°C
The embedded logic controller runs a fully functional field-oriented AC motor control operating system (OS) that can be
user-tailored via parameter modification. The OS also contains logic to execute OEMdeveloped software, called VCL, that can be
used to enhance the controller capabilities beyond the basics.
VCL (Vehicle Control Language) is an innovative software programming language developed by CURTIS. Many electric vehicle functions
are uniquely built into the VCL code, and additional functions can be OEM-controlled using VCL code. VCL opens new avenues of
customization, product differentiation, and responsiveness to the market.
The CAN bus communications included in the 1236, as well as in many other CURTIS products, allow these AC induction motor
controllers to be part of an efficient distributed system. Inputs and outputs can be optimally shared throughout the system,
minimizing wiring and creating integrated functions that often reduce the cost of the system. CURTIS 1236 controllers are the
ideal solution for traction, hoist, dual drive, and other motor drive and vehicle control needs.
The 1236 controllers are fully programmable through the CURTIS Model 1313-4331 Handheld Programmer or 1314 PC Programming Station.
The programmer provides diagnostic and test capability in addition to configuration flexibility.
Key Features:
* CURTIS Model: 1236-5401 / 1236-6401
* Nominal input voltage: 36-48V (1236-5401) or 48-80V (1236-6401)
* 2 Minute RMS Current Rating (amps): 450A (1236-5401) or 350A (1236-6401)
* MOSFET overtemperature cutback: linear cutback starts at 100°C; complete cutoff at 110°C
* MOSFET undertemperature cutback: approx. 50% motor current at -25°C; complete cutoff at -40°C
* All low power connections are made through a single 35-pin AMPSEAL connector
* Throttle Type: 0-5K Ω (default setting), flexible throttle circuitry accommodates a variety of throttle types: 5kΩ–0, 0–5kΩ,
0–5V, etc.
* Operating Ambient Temperature Range: -40°C to 50°C
* Internal Heatsink Operating Temperature Range: -40°C to 95°C
* Storage Ambient Temperature Range: -40°C to 95°C
* Package environmental rating: IP65
* Dimensions: W165 × L232 × H85 mm (6.5" × 9.1" × 3.4")
* Net Weight: 4.12 kg (9.1 lbs)
Features Include:
* High ef?ciency, ?eld-oriented motor control algorithms
* Advanced Pulse Width Modulation technology for ef?cient use of battery voltage, low motor harmonics, low torque ripple, and
minimized switching losses
* Extremely wide torque/speed range including full regeneration capability
* Smooth low speed control, including zero speed
* Adaptation of control algorithm to motor temperature variation so optimal performance is maintained under widely varying
conditions
* Real-time battery current, motor torque, and power estimates available
* Power limiting maps allow performance customization for reduced motor heating and consistent performance over varying battery
state-of-charge
* Powerful operating system allows parallel processing of vehicle control tasks, motor control tasks, and user con?gurable
programmable logic
* A wide range of I/O can be applied wherever needed, for maximum distributed system control
* Internal battery-state-of-charge, hourmeter, and maintenance timers
* Easily programmable through the Curtis 1313-4331 Handheld Programmer or 1314 PC Programming Station
* CAN bus connection allows communication with other CAN bus enabled system components; protocol meets CANopen standards; other
11-bit identi?er ?eld CAN protocols can be custom con?gured through VCL
* Field-programmable, with ?ash downloadable main operating code
* Thermal cutback, warning, and automatic shutdown provide protection to motor and controller
* Rugged sealed housing and connectors meet IP65 environmental sealing standards for use in harsh environments
* Insulated metal substrate power base provides superior heat transfer for increased reliability
* Built-in Dual Drive software allows easy setup and control of typical dual-drive vehicles, without VCL
CURTIS 1236 AC induction motor controllers deliver smooth power unlike any previous vehicle control system. They provide
unprecedented flexibility and power through inclusion of a field-programmable logic controller embedded in a state-of-the-art
motor controller.
Specifications:
* PWM operating frequency: 15 kHz
* Electrical isolation to heatsink (min.): 500 VAC
* PWM operating frequency: 10 kHz
* Maximum encoder frequency: 15 kHz
* Maximum controller output frequency: 300 Hz
* Heatsink overtemperature cutoff: linear cutback starts at 85°C; complete cutoff at 95°C
* Heatsink undertemperature cutoff: complete cutoff at -40°C
The embedded logic controller runs a fully functional field-oriented AC motor control operating system (OS) that can be
user-tailored via parameter modification. The OS also contains logic to execute OEMdeveloped software, called VCL, that can be
used to enhance the controller capabilities beyond the basics.
VCL (Vehicle Control Language) is an innovative software programming language developed by CURTIS. Many electric vehicle functions
are uniquely built into the VCL code, and additional functions can be OEM-controlled using VCL code. VCL opens new avenues of
customization, product differentiation, and responsiveness to the market.
The CAN bus communications included in the 1236, as well as in many other CURTIS products, allow these AC induction motor
controllers to be part of an efficient distributed system. Inputs and outputs can be optimally shared throughout the system,
minimizing wiring and creating integrated functions that often reduce the cost of the system. CURTIS 1236 controllers are the
ideal solution for traction, hoist, dual drive, and other motor drive and vehicle control needs.
The 1236 controllers are fully programmable through the CURTIS Model 1313-4331 Handheld Programmer or 1314 PC Programming Station.
The programmer provides diagnostic and test capability in addition to configuration flexibility.
Key Features:
* CURTIS Model: 1236-5401 / 1236-6401
* Nominal input voltage: 36-48V (1236-5401) or 48-80V (1236-6401)
* 2 Minute RMS Current Rating (amps): 450A (1236-5401) or 350A (1236-6401)
* MOSFET overtemperature cutback: linear cutback starts at 100°C; complete cutoff at 110°C
* MOSFET undertemperature cutback: approx. 50% motor current at -25°C; complete cutoff at -40°C
* All low power connections are made through a single 35-pin AMPSEAL connector
* Throttle Type: 0-5K Ω (default setting), flexible throttle circuitry accommodates a variety of throttle types: 5kΩ–0, 0–5kΩ,
0–5V, etc.
* Operating Ambient Temperature Range: -40°C to 50°C
* Internal Heatsink Operating Temperature Range: -40°C to 95°C
* Storage Ambient Temperature Range: -40°C to 95°C
* Package environmental rating: IP65
* Dimensions: W165 × L232 × H85 mm (6.5" × 9.1" × 3.4")
* Net Weight: 4.12 kg (9.1 lbs)
Features Include:
* High ef?ciency, ?eld-oriented motor control algorithms
* Advanced Pulse Width Modulation technology for ef?cient use of battery voltage, low motor harmonics, low torque ripple, and
minimized switching losses
* Extremely wide torque/speed range including full regeneration capability
* Smooth low speed control, including zero speed
* Adaptation of control algorithm to motor temperature variation so optimal performance is maintained under widely varying
conditions
* Real-time battery current, motor torque, and power estimates available
* Power limiting maps allow performance customization for reduced motor heating and consistent performance over varying battery
state-of-charge
* Powerful operating system allows parallel processing of vehicle control tasks, motor control tasks, and user con?gurable
programmable logic
* A wide range of I/O can be applied wherever needed, for maximum distributed system control
* Internal battery-state-of-charge, hourmeter, and maintenance timers
* Easily programmable through the Curtis 1313-4331 Handheld Programmer or 1314 PC Programming Station
* CAN bus connection allows communication with other CAN bus enabled system components; protocol meets CANopen standards; other
11-bit identi?er ?eld CAN protocols can be custom con?gured through VCL
* Field-programmable, with ?ash downloadable main operating code
* Thermal cutback, warning, and automatic shutdown provide protection to motor and controller
* Rugged sealed housing and connectors meet IP65 environmental sealing standards for use in harsh environments
* Insulated metal substrate power base provides superior heat transfer for increased reliability
* Built-in Dual Drive software allows easy setup and control of typical dual-drive vehicles, without VCL
Product Paramenters
Model Number | 1236E-5421 | Weight | 4.12kg |
Brand Name | Curtis | Dimensions | L140×W180×H71 mm |
Voltage | 36V-48V | Package environmental rating | IP53 |
Current | 350A | Ambient Operating Temperature Range | -40°C to 50°C |
related products
our factory
Our Company
Hefei Huanxin Technology Development Co., Ltd. has been devoting ourselves to developing and manufacturing and other since 2004.
We are located in Hefei, Anhui Province, with convenient transportation access. We employ over 101 - 200 People staff members. We
have achieved great improvement since our company was founded in 2004.
We abide by the motto of Firstclass quality, Reasonable price, Best service and Professional product support.
We are located in Hefei, Anhui Province, with convenient transportation access. We employ over 101 - 200 People staff members. We
have achieved great improvement since our company was founded in 2004.
We abide by the motto of Firstclass quality, Reasonable price, Best service and Professional product support.
Packing & Delivery
Exhibition
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Sample needs 3-5 days.
Q3. Do you have any MOQ limit?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea
shipping also optional.
Q5. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our
sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 1 year warranty to our products.
Q8: How to deal with the faulty?
A: Our products are produced in strict quality control system and the defective rate will be less
than 0.2%
Please feel free to contact us if you have any problem!
Contact Us
- Hefei Huanxin Technology Development Co., Ltd.
Product Categories
New Products
-
curtis 1207b-5101 controller 24v 300a for golf cart forklift eve conversion kit
-
1238E-6521 Curtis 96v ac controller for forklift steering and golf cart eve conversion kits
-
original Curtis AC Motor Controller 1238 1238E 96V 15KW Engine Driver for forklift golf cart
-
Electric cart eve conversion kit curits ac controller AC 96V 1238e-6521 With ce certificate
-
Curtis controller AC F2-A with 24v 200a for electric forklift
-
sale price Curtis controller Golf Carts Programmable Motor Controller 1266A-5201
-
curtis Dc Controller driver 1266a-5201 replacement of 1510-5201 for electric vehicle eve conversion kit
-
36v-48v Curtis 1266-5201 volt-adjustable DC motor controller
-
CURTIS Motion controller as well as Servo Motor controller for golf cart driver eve conversion kit
-
Curtis club car shuttle bus DC conversion kit 1268-5403
-
Dc Series Controller Kit Ev Car Conversion Kit Include Accelerator 1268-5403 for electric cart
-
1205M-6B403 Club Car DC Motor Speed Controller Curtis 60V/72V-400A Controller
-
1238-6501curtis ac 48v 80v 72v 550a Controller for electric cart
-
curits Controller P1207-5101 for servo motor driver Replacement of CURTIS 1207B-4102 24V
-
curtis controller ac 48v 96v servo motor driver for electric cart
-
Curtis AC Motor Controller 1232SER-5422 High Quality Driver
-
Curtis ac controller 48V 400A 500W 600W 700W 1232ser-5422 for car electric conversion kit of electric cart
-
Curtis controller servo motor controller 36v 48v dc controller for electric golf cart
-
servo motor controller curits 36v 48v 275a dc controller for motion controller of electric golf cart
-
servo motor controller 24v 110a driver curtis 1212s-2601 for electric cart
-
servo motor controller Curtis AC Motor Controller 1232SER-5422 High Quality Driver 48v 400a
-
curtis servo motor controller 24v 200w 300w 500w 100w driver curtis 1212s-2601 for electric cart
-
servo motor controller curits 1266a-5201 for 36v 48v 275a car electric conversion kit
-
1268-5403 Curtis controller servo motor controller 36v 48v dc controller for car electric conversion kit
Popular Searches
- 1238-6501 curtis controller
- curtis controller 1268-5403
- ac motor control
- controler ebike
- cart control
- lathe speed controler
- pwm for hho
- 1268-5403 curtis controller
- 1266-5201 curtis controller
- agv controller
- separately excited
- at motor controller
- abbs motor controller
- acs motor controller
- amplify motor controller
- armed motor controller
- brushless and sensorless controller
- bipolar stepper motor controller
- brushless controler 72v
- controler for electric motor
- controler 60v
- car electric controler
- curti
- curty
- dc controler
- dc control
- electrical vehicles motor dc controler
- ford cruise control
- bc motor controller
- electric dc controll
Recommended Products
- ABB Soft starter PSTB PSTX PSE PSR300/370/470/570/720/840/1050
- Parker AC890 SD seriesIntegrated frequency converter 890SD-433105F2-B00-1A000 servo drive
- Parker SSD AC890 series AC Variable Frequency Drives 890CD-531200B0-000-1A000 Servo driver
- Parker SSD AC890 series AC Drives 890CD-531200B0-000-1A000 Complete models, welcome to inquire
- Parker SSD AC890 series AC Drives 890SD-232110B0-B00-1A000 The models are complete, welcome to inquire.
- Parker SSD AC890 series AC Drives 890CD-231300B0-000-1A000 AC Variable Frequency Drives
- Parker SSD AC890 series AC Drives 890SD-433145F2-B00-1A000 AC Variable Frequency Drives
- Parker SSD AC890 series AC Drives 890SD-531200B0-B00-1A000 AC Variable Frequency Drives
- Parker SSD AC890 series AC Drives 890SD-531200B0-B00-1A000 AC Variable Frequency Drives
- Parker SSD AC890 series AC Drives 890CD-531200B0-000-1A000 AC Variable Frequency Drives
- Parker SSD AC890 series AC Drives 890CD-532450D0-000-1A000 AC Variable Frequency Drives
- Parker SSD AC890 series AC Drives 890CD-532450D0-000-1A000 Complete models
Find Similar Products By Category
- Auto, Motorcycle Parts & Accessories > New Energy Vehicle Parts & Accessories > Motor Controller
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Hefei Huanxin Technology Development Co., Ltd.
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
sales
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile