48V 1215 programmable dc motor pump controller electric forklift tractor parts

Key Features:

CURTIS Model: 1215-8307
Norminal Battery Voltage (Volts): 48V (default setting) or 36V
2 Minute Current Rating (amps): 500
Under Voltage Cutback (Volts): 21V
Contactor Voltage (Volts): battery voltage
PWM operating frequency: 15 kHz
Electrical isolation to heatsink (min.): 500 VAC
KSI input voltage: 16–45V
KSI input current (no contactors engaged):
80 mA without programmer
130 mA with programmer
Logic input current: < 2 mA
Status LED output current (max.): < 2 mA
Throttle Type: 0-5K Ω (default setting), flexible throttle circuitry accommodates a variety of throttle types: 5kΩ–0, 0–5kΩ, 0–5V, 0–10V, inductive, Hall, etc.
Ambient Operating Temperature Range: -40°C to 50°C
Heatsink Overtemperature Cutback: 85°C
Heatsink Undertemperature Cutback: -25°C
Storage ambient temperature range: -40°C to 85°C
Dimensions: L254xW180xH82 mm

Features Include:

Power MOSFET design, providing
infinitely variable drive and plug brake control
silent high-frequency operation
high efficiency (for reduced motor and battery losses)
Overvoltage and undervoltage protection
Thermal protection/compensation circuitry that provides undertemperature cutback, constant current limit over operating range, and linear rollback in overtemperature-thus preventing sudden power loss regardless of thermal conditions
Diagnostic and test information for the controller-and other system components-readily available through both an on-board LED and the optional handheld programmer
Meets or exceeds EEC fault detect requirements, with circuitry and software to detect faults in the throttle circuit, MOSFET drive circuits, MOSFET output, contactor drivers, and contactors
Programmable input sequencing options include several combinations of neutral start and static return to off (SRO)
Arcless contactor switching with microprocessor-controlled contactor sequencing
Smooth, controlled plug braking-with either variable (throttledependent) or fixed plug current limit
Neutral braking option provides automatic plug braking in neutral
MultiMode™ input selects between two different operating modes, thus allowing optimization of vehicle characteristics for different driving conditions
Emergency reverse (belly button switch) provides full function with a single input
Anti-rollback (ramp start) provides full power for starting on ramps
Simple contactor and switch wiring, with coil drivers monitored for shorts and open circuits-thus ensuring fail-safe operation
Flexible throttle circuitry accommodates a variety of throttle types: 5kΩ–0, 0–5kΩ, 0–5V, 0–10V, inductive, Hall, etc.
Programmable "ramp shape" (static throttle map) provides flexibility in selecting throttle response feel
Sealed package, providing environmental protection
Power connections made by tin-plated solid copper busses, with a polarized Molex connector for control signals
Easily programmable through the CURTIS Model 1313-4431 Handheld Programmer or 1314 PC Programming Station.
Rugged anodized aluminum extruded housing meets IP65 environmental sealing standards for use in harsh environments.