4FE+CATV+WiFi GEPON ONU

GEPON ONU has 1 PON port, 4×10/100BASE-T ports ,one CATV output and WiFi capability are all included on the ONU.

The 4FE ONU is primarily intended for FTTH and FTTO applications. It supports the 1000Base-PX20 standard, which has a maximum optical splitting ratio of 1:64 and a distance of 20 kilometers, as well as one uplink GE PON port. Its collaboration with OLT allows it to create a flexible network topology and maintain it, as well as deliver entire FTTx solutions. The CATV WiFi ONU has a built-in CATV receiver for receiving analog or DVB TV broadcasts.

With downlink wavelengths of 1550nm and 1490nm and uplink wavelengths of 1310nm, the GEPON ONU uses single fiber WDM technology. To transmit data and CATV service, only one-core fiber is required.

•  In compliant with IEEE802.3ah Standard and CTC2.1/3.0

•  Up to 20KM transmission Distance

•  Support VLAN and IGMP

•  Support port isolation between different ports

•  Integrated OAM remote configuration and maintenance function

•  Plug and play, integrated auto detecting, auto configuration, and auto firmware upgrade technology

•  EMS network management based on SNMP ,convenient for maintenance

•  Full speed non-blocking switching.

•  Support QinQ VLAN, 1:1 VLAN, VLAN reusing, VLAN trunk, etc.

•  Integrated port monitoring, port mirroring, port rate limiting, port SLA, etc.

•  Support auto polarity detection of Ethernet ports (AUTO MDIX).

•  Integrated IEEE802.1p QoS with four level priority queues.

•  Support IPv4 IGMP snooping and IPv6 MLD snooping.

• Turn on/off RF output remotely

• Wavelength：1550 +/- 10nm

• Optical return loss：>45dB

• Input optical power：-8dBm～+2dBm

• RF frequency：47MHz~875MHz

• RF output lever：75～80dBuV

• CNR：>46dB，CSO: >58dBc，CTB:  >58dBc

• RF output return loss： >14dB

• RF impedance： 75Ohm

Typical Solution：FTTH、FTTO、PON+EOC

Typical Business：INTERNET、CATV、IPTV、VOD、IP Camera、WIFI