1GE+1FE+CATV+2WiFi+1POTS XPON ONU

FOB Price

USD $150 - $200 / Unit

1 Unit(Min.Order)

Port shanghai
Payment TermsT/T L/C D/P D/A PayPal
Delivery Detail1 days

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Details

Brand Name	baudcom		Place of Origin	China
Model Number	BD-ONT-412WT

Product Description

Overview

1GE 1FE XPON ONU has 1 x 10/100/1000Mbps (GE) and 1 x 10/100Mbps (FE) auto adaptive Ethernet interfaces, full/half, RJ45 connector, 9602C chipset, power AC90~230V.

In some FTTH solutions, 1GE 1FE XPON ONU is designed as an HGU (Home Gateway Unit). The carrier-class FTTH application allows users to access a variety of services. The dual mode XPON ONU is based on XPON technology, which is mature, stable, and cost-effective. When access to the EPON OLT and GPON OLT is granted, it may automatically switch to EPON or GPON mode.

To fulfill the technical performance of the GPON Standard of ITU-TG.984.X and the EPON Standard of China Telecom CTC3.0, XPON ONU WiFi uses high reliability, easy management, configuration flexibility, and good service quality assurances. This XPON ONU is compatible with all OLT brands, including Huawei, ZTE, and others.

Functional Features

Support EPON/GPON mode and switch mode automatically
Support Route mode for PPPoE/IPoE/Static IP and Bridge mode
Support IPv4 and IPv6 Dual mode
Support 2.4G WIFI and 2*2 MIMO
Support SIP Proctol for Voip Service
Support CATV interface for Video Service and remote control by Major OLT
Support LAN IP and DHCP Server configuration
Support Port Mapping and Loop-Detect
Support Firewall function and ACL function
Support IGMP Snooping/Proxy multicast feature
Support TR069 remote configuration and maintenance
Specialized design for system breakdown prevention to maintain stable system

Specification

Hardware Specification

Technical item	Details
PON Interface	1 GPON BOB （Bosa on Board）
	Receiving sensitivity: ≤-28dBm
	Transmitting optical power: +1~+4dBm
	Transmission distance: 20KM
Wavelength	TX: 1310nm, RX: 1490nm
Optical Interface	SC/APC Connector
Design Scheme	RTL9602C+RTL8192FR+Si32192 BOB(RTL8290B)
Chip Spec	CPU 625MHz,DDR2 64MB
Flash	SPI Nor Flash 16MB
LAN Interface	1 x 10/100/1000Mbps(GE) and 1 x 10/100Mbps(FE) auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
Wireless	Compliant with IEEE802.11b/g/n,
	Operating frequency: 2.400-2.4835GHz
	support MIMO, rate up to 300Mbps,
	2T2R,2 external antenna 5dBi,
	Support: Multiple SSID
	Channel: Auto
	Modulation type: DSSS, CCK and OFDM
	Encoding scheme: BPSK, QPSK, 16QAM and 64QAM
CATV Interface	RF, WDM, optical power : +2~-15dBm
	Optical reflection loss: ≥45dB
	Optical receiving wavelength: 1550±10nm
	RF frequency range: 47~1000MHz, RF output impedance: 75Ω
	RF output level: 78dBuV
	AGC range: -13~+1dBm
	MER: ≥32dB@-15dBm
POTS interface	1 FXS, RJ11 connector
	Support: G.711/G.723/G.726/G.729 codec
	Support: T.30/T.38/G.711 Fax mode, DTMF Relay
	Line testing according to GR-909
LED	10 LED, For Status of WIFI、WPS、PWR、LOS、PON、LAN1~LAN2、FXS、 Worn、 Normal(CATV)
Push-Button	3,For Function of Reset, WLAN, WPS
Operating Condition	Temperature: 0℃~+50℃
Operating Condition	Humidity: 10%～90%（non-condensing）
Storing Condition	Temperature: -30℃~+60℃
Storing Condition	Humidity: 10%~90%（non-condensing）
Power Supply	DC 12V/1A
Power Consumption	≤6W
Dimension	180mm×107mm×28mm（L×W×H）
Net Weight	0.2Kg

Panel lights Introduction

Pilot Lamp	Status	Description
WIFI	On	The WIFI interface is up.
	Blink	The WIFI interface is sending or/and receiving data (ACT).
	Off	The WIFI interface is down.
WPS	Blink	The WIFI interface is securely establishing a connection.
WPS	Off	The WIFI interface does not establish a secure connection.
PWR	On	The device is powered up.
PWR	Off	The device is powered down.
LOS	Blink	The device doses not receive optical signals or with low signals.
LOS	Off	The device has received optical signal.
PON	On	The device has registered to the PON system.
	Blink	The device is registering the PON system.
	Off	The device registration is incorrect.
LAN1~LAN2	On	Port (LANx) is connected properly (LINK).
	Blink	Port (LANx) is sending or/and receiving data (ACT).
	Off	Port (LANx) connection exception or not connected.
FXS	On	Phone has registered to the SIP Server.
	Blink	Phone has registered and data transmission (ACT).
	Off	Phone registration is incorrect.
Worn (CATV)	On	Input optical power is higher than 3dbm or lower than -15dbm
Worn (CATV)	Off	Input optical power is between -15dbm and 3dbm
Normal (CATV)	On	Input optical power is between -15dbm and 3dbm
Normal (CATV)	Off	Input optical power is higher than 3dbm or lower than -15dbm

Application

Typical Solution：FTTH(Fiber To The Home)
Typical Business：INTERNET、IPTV 、WIFI 、VOIP、CATV etc

Contact Us

Shanghai Baudcom Communication Device Co.,Ltd

*Email
Please enter Your valid email address.
*To

Shanghai Baudcom Communication Device Co.,Ltd
*Message
Your inquiry content must be between 20 to 5000 characters.
Please enter a correct verification code.

Product Categories

electronic communication equipment

phone

1GE+1FE+CATV+2WiFi+1POTS XPON ONU

You May Like

Product Details

Product Description

Contact Us

Product Categories

New Products

Popular Searches

Recommended Products

Find Similar Products By Category

Product Tags: