Wireless Keyhole Motion Sensor Detector LED Light Lamp Auto PIR Door Hole Key Perfect Infrared For Kitchen Living Room Bedroom

· Light up a dim porch, undercabinet, or garage without needing to flip a light switch with this mini motion detection LED light.

· SUPER EASY TO INSTALL: this mini LED light even a three year old can install it. Just attach the included double-sided sticky tape to the back of the fixture, then place it where you want. Just as easy as that

· MONEY SAVING: no need to take a qualified electrician to install these lighting fixtures that will definitely cost you extra money;the light sensor detects movement within a 60-degree angle and a 3 meter range, the light switches on and stays illuminated until the sensor detects no motion for around 8 seconds.

· FIT YOUR ROOM:small size of the fixture makes it fit effortlessly into your modern home décor and most importantly, onto your doors above the keyhole

Even a three year old can install the light easily. Just attach the included double-sided sticky tape to the back of the fixture, then place it where you want. The detachable battery box cover allows you to change the battery after the light is already installed.

1 x Keyhole LED light

1 x User manual

1 x Adhesive pad

Low profile energy efficient motion sensor LED light for automatic illumination equipped with 4 LED for bright light output with 3.0-metre detection range at 60-degree detection angle. 

Product Specifications
LED Quantity: 4PCS.
LED life:100000 Hours
Sensor sensitivity Angle: 60°.
Sensor sensitivity Distance: ≤9.8ft
Standby current: <0.35mA.
Powered By: 1.5V, 1PCS"AA" Battery (Not included).
Operating humidity:5%-93%
Delay time: Light will delay 5 seconds turn off.
Body Material: ABS & Plastic
Product Size: 3.189inch x1.81 inch x 1.181inch.
Product Weight: 60g
Color: silver/white

Troubleshooting:

1. When the power is turned on, the light does not light up.

Solution: A. Check the polarity of the battery installation

B. When the ambient light is too bright, the lamp is in standby mode.

C. The battery is out of power, please replace the battery.

2. When the power is turned on, the LED light flashes.

Solution: A. The host needs one to two minutes to stabilize the internal circuit.

B. The battery may be low, please replace the battery.

Precautions:

1. Do not place the product facing the glass door or where the temperature changes drastically,

2. Because this product uses infrared sensors, it needs a more stable environment.

3. Please place the light away from monitors and TVs.

4. Please pay attention to the temperature and humidity of the working environment, otherwise the battery life will be affected.

5. Use good quality LR06 (AA) No. 5 batteries.

6. After the light goes out, there is a delay time of 6-8 seconds, and then work again.

7. Do not direct LED lights to people's eyes, especially children.

8. When installing the product, do not install it in a place where children can easily get it, so as to avoid accidents to children