laminator 380

1. Automatic paper lapping control system, which can automatically control the lap length between sheets of paper.

2. LCD touch screen operation + display;

3. Heating mode: internal infrared oil heating, surface temperature measurement, more uniform, the temperature can be adjusted according to the requirements of laminating.

4. Pressure mode: Hydraulic lamination pressure;

5. Anti bending device: after laminating, the paper is fixed by the anti bending device, and after cutting, the paper is no longer bent.

6. The punching knife can roll out a row of small holes on the edge of the film to realize automatic cutting smoothly.

7. The film Slitter can cut the wide and long film roll (relative to the paper size). After cutting, the surplus film is left on the film releasing shaft.

8. Pneumatic slitting system: pneumatic slitting, users only need to input the paper size on the touch screen to realize the automatic cutting of laminating paper.

9. Paper receiving station: the paper after slitting will be sent to the receiving desk. The tilt angle of the table can be adjusted according to the actual needs.

10. The integrated structure design makes the operation of the equipment more stable and prolongs the service life of the equipment.

11. DC high power motor speed control system. Users can change the running speed of the machine according to the needs and ensure the smooth operation of the equipment;

12. Counting function;