Computerized Hydraulic Pump and Motor Flow Meter Pressure Meter Testing Kit

Digital Pump Pressure Portable Tester, Mobile Motor Flow Tester

Hydraulic Flow Meter Testing Kit, which is used for checking and surveying hydraulic system's ure and temperature,is the initiation in china,and has gotten the country patent.

Hydraulic Flow Meter Testing Kit, is an all-in-line unit designed to test the performance of hydraulic pumps, motors, valves and hydrostatic transmissions.

Digital Excavator Hydraulic System and Pump Pressure and Flow Hydraulic Tester

Instrument features:

         Accurate measurement of flow, pressure, temperature

         Safe hydraulic oil can be two-way flow, one-way loading, both to protect the staff also protect the instrument

         Quick hydraulic equipment, hydraulic pump, hydraulic motor, hydraulic valve, hydraulic cylinder online test, simple connection

         Lightweight instrument light weight, small size easy to carry. Beautiful design, easy to clean
 
         Power meter selection 12V lithium battery, can be repeated charging, large capacity, long life

Precautions for use:

        After the instrument is connected, the load valve must be opened before opening the device. Otherwise, it may cause danger! The The
 
         1) When the tester is working, ensure that the load valve is open normally

         2) End the test and turn off the power switch

         3) oil temperature above 30 ℃, instrument test can be accurate

        4) Before the test, open the load valve

Rexroth Hydraulic Pump and Motor Repairing Equipment,Vane Pump Testing Equipment

Features:

1.ACCURATE measurement of flow,pressure,peak pressure and temperature.

2.SAFE to use in both directions of flow.Internal oil by-pass protects multimeter and operato against overpressure.

3.Bi-DIRECTIONAL for unrestricted connection and simplified testing.

4.FAST checks on pumps,motors,valves,cylinders,hydrostatic transmissions.

5.EASY to operate controls.Connect Into the hydraulic system and simply“Switch on”.

6.PORTABLE AND LIGHTWEIGHT with the case for easier viewing and cleaning.

7.RECHARGEABLE POWER:lithium battedes 12v.

Main technical features
55KW-4 frequency conversion motor; working pressure 35MPa, proportional automatic control
Configure the calculation-aided test function, test curves and reports can be stored and printed.

 Hydraulic gear pump test bench is designed and manufactured according to the national and industrial testing standards, which is suitable for the vane pump, gear pump, piston pump test of performance in single, double and multi-link of motor. This test-bed is a must test equipment for enterprises of hydraulic pump production, application, maintenance or re-manufacturing.  

Fully automatic computer acquisition hydraulic pump test bed electrical control adopts high voltage independent type, frequency converter and high voltage part independent placed behind the bench, operation panel and the instrument layout is concise and easy, data acquisition interface is fully functional.
The control part of the electronic control system is based on PLC, collecting the state signal of the hydraulic system, receiving operation instructions and setting information of the parameters.Control mode breakups and automatic mode.The data acquisition system is based on the data sharing of the industrial control machine and the PLC, and the data collected by the PLC is analyzed and processed.Data acquisition software is test condition monitoring, data real-time display, test, process control, test curve drawing, test report generation, participants pump login information storage, fault alarm information display, test reports and test data management, and other functions.

Hydraulic pump test stand,Hydraulic Motor Test Stand,Gear Pump Test Bench

/en/

whatsapp:+8615154196819

email:admin@chinasdhydraulic.com

/rexrothpump

/Yuanyihyd