Rusting Grease Oxygen Inhalation Tester JIS K2246

Product Introduction

The operating principle of this instrument: put the sample into an oxygen bomb that meets certain conditions for oxidation, observe and record the pressure at the specified time interval. The degree of oxygen uptake of the sample is indicated by the corresponding decrease in oxygen pressure after 100 h. The instrument is suitable for anti-rust grease.

Technical Parameter

1. Applicable standard: JISK2246 SH/T0060

2. Heating method: electric heating tube heating

3. Power of the whole machine: 2.5KW

4. Control mode: single-chip automatic control

5. Timing method: automatic recording by single-chip microcomputer

6. Result processing: automatically record and store the results

7. Pressure display: LCD screen displays real-time curve

8. Working power supply: AC220, 240V/50, 60HZ

Performance Characteristics

1. Standard brass small circular plate Φ33×1.2mm;

2. The whole test process is automatically controlled by a single-chip microcomputer, and no manual conduct is required;

3. The test process is displayed in real time with a curve on the LCD screen, and the results are clear at a glance;

4. Two tests can be done at the same time, which is convenient for parallel samples, and the test results are automatically stored;

5. Automatic detection of oxygen bomb pressure leakage and alarm;

6. The high-precision pressure transmitter converts the pressure signal, and the number is displayed on the LCD screen;

7. Stainless steel heater, heating bath;

8. The instrument has an automatic correction function and can be repaired online;

9. A variety of thermal insulation materials are used for thermal insulation to avoid scalding staff;

10. A single sample dish holder can hold 5 sample dishes.