Stainless Steel Hazelnut Peeling Machine Manufacturer | hazelnut peeling machine | Automatic Roasted Hazelnut Peeling Blanching Machine

Stainless Steel Hazelnut Peeling Machine Manufacturer  |  hazelnut peeling machine | Automatic Roasted Hazelnut Peeling Blanching Machine

Operation steps of the hazelnut peeling machine:

1. Before starting the machine, first check whether the transmission parts are loose or not, and the abnormal noise is eliminated in time.

2. Check each device connected to the power supply for damage or leakage. Check the power and turn it on.

3. Pour the dried material into the hopper, and the material enters the main machine to raise the front door. When the plexiglass in the machine is used to observe the requirements of the tweezers in the machine, the front discharge door is gradually lowered to reach Material effect. (Twist the two right-angle screws on the front).

4, the drying effect of the material, the level of water content, will directly affect the peeling rate, according to the peeling effect to increase or lower the discharge door.

5, the peeling effect is good, the material door is lowered, and the output is fast and the output is high.

6. The roller of the new machine is relatively coarse. When it is used, it is higher than the normal parameters. After a period of time, the peeling effect is better.

7. When using the machine, check the parts, bolts, belts, main machine and fan dirt regularly to clean them in time to avoid affecting normal use and keeping them clean and hygienic.

Email: info@everfitfm.com
Whatsapp: 86-18503860088