Die forging anvil base

Product introduction  

The anvil block is the supporting surface of the die forging hammer strike, and an important part to support the lower anvil and bear the hammer force. The structure is relatively simple, and it belongs to the simple thick large steel castings.  Die forging hammer because of its particularly bad working conditions, its relatively large force parts - anvil block will be subjected to frequent impact and overload, especially in the final forging, overload situation is more serious, anvil block is prone to early failure.  

The forward cast steel is cast by sodium silicate sand, which ensures the strength and hardness of the anvil block, and can reduce the weight of the anvil block and the weight of the press. It can effectively improve the accuracy of the product when the equipment is running.  We have more than ten years of casting experience, can cast various types of steel castings, customers encountered problems can give professional guidance and answer.  

Highlight the advantages of  

1, Qianjin cast steel adopts high strength steel, professional heat treatment technology and sodium silicate sand casting process, on the one hand to ensure the strength and hardness of the anvil, on the other hand, the weight of a single piece is reduced, so as to effectively reduce the weight of the whole press, improve the accuracy of the workpiece;  

2, the company has a group of technical experts hired from famous domestic casting enterprises, responsible for the company's technology, process, management and operation, etc., to establish a set of scientific and perfect technology, production and operation management system, effectively ensure the product quality and delivery time required by customers;  

Forward 3, in the process of the anvil block casting, steel casting strictly controls the samples of raw materials, product inspection, quality assessment, such as work, and equipped with Germany OBLF GS1000 vacuum direct reading spectrometer, high-speed carbon sulfur analyzer, digital ultrasonic flaw detector, multi-purpose magnetic powder flaw detector and other professional physical and chemical testing facilities, nondestructive flaw detection on each piece of products,  Prevent any defective products from leaving the factory;  

Testing equipment  

4, Qianjin cast steel has many years of casting experience and strong mechanical processing capacity, can provide customers with a series of services and complete solutions from blank casting to finished products processing;  

5. There are two 30-ton alkaline arc furnaces and four large natural gas heat treatment furnaces, and arc gouging is used in the finishing of steel castings, so that the appearance and quality of products are greatly guaranteed