11KV series Cast Resin Dry Type Transformer

As one of the professional China power transformer manufacturers, Yuebian has advanced production equipment and a complete product inspection system. Our transformers have high mechanical strength, balanced ampere-turn distribution and good short-circuit resistance.

General introduction of SGB10 Cast Resin Transformer:

Cast Resin Transformer, is well applied in power plant substation with low voltage device, high voltage device, epoxy encapsulated transformer, and other components integrated, greatly recognized by its functional and energy saving properties. It is safe, non-pollute, and flameproof which can be installed directly on the load center with the merits of free maintenance, easy installation, low combined operation cost, low loss and excellent humidity resistance.

Product specification of SGB10 Cast Resin Transformer:

Service condition:

The height above the sea level is below 1000m.

Ambient temperature:

Highest air temperature +40oC

Highest daily average air temperature +30oC

Highest annual average air temperature+20v

Lowest outdoor air temperature-25oC

The scope of application:

Applies to high fireproofing, load fluctuating, unventilated, incommodious, dirty and moist environment such as power plant field, subway, metallurgy, hospital, high-rise building, shopping center, crowded resident zone, and the special environment such as petrol-land chemical industry, nuclear power station, a nuclear submarine.

Product features(advantages )of SGB10 Cast Resin Transformer:

A.Good heat emission, big overload capacity. Cast resin type transformer can work without wind machine for a long time under 130 overloads, and be full load without compulsive wind cool without capacity descending under IP45 condition.

B.Perfect safe and resistance to fire operating can be combusting for long period under 800oC and without smoke

C.Strong resistance to thermal shock(can be full load immediately at -50oC)

D.Complete waterproof and airproof.

E.No partial discharge

F. Good hydrophobicity and good resistance to alkaline cauterization and fundal influence

G. Environmental, low noise, no deleterious gas, easy to decomposition.

What is Resin Insulation Dry Type Transformer?

The 1000 kva dry type transformer is for indoor application and fireproof. Both of the high and low voltage windings are encased in resin, so it prevent the windings from dust and corrosive air. The iron core is made up of cold-rolled silicon-steel plate. All products are qualified by National Mechanical & Industrial Bureau and National Power Company. It is widely used in power network, projects, grid construction, etc.

Deliver and shippment of SGB10 Cast Resin Transformer:

Sea transportation. 1 set Transformer per wooden carton.

Production Process of 11KV series Cast Resin Dry Transformer

Specification of 11KV series Cast Resin Dry Type Transformer