Description:
ATU-130 is a 200w automatic antenna tuner. Improved on the basis of ATU-100, it is a miniature antenna tuner, your ideal HAM supplies.

Compared with ATU-100, it has these advantages:
- Fast MCU
- Better relay
- Better capacitor
- Bigger magnetic
- Thicker wire diameter
- Great power tolerance

Features:
- Adopt PIC18F2520, MCU (faster)
- Miniature HF automatic antenna tuner
- 8-20W tuning
- The third version adopts 4pcs large magnetic ring inductors, producing less heat that the previous version
- Adopt HF32, 10A, HF33, 5A relay
- Using high-voltage ceramic capacitors
- Maximum measurable SSB 225w max. It is recommended to use SSB not more than 200w for a long time. As for other continuous modes, not more than 130W (FT8, CW, FM)
- Size: 38 x 88 x 155mm/1.5 x 3.5 x 6.1" (without the size of protrusions)
- 0.5kg net weight: Portable to carry. Suitable for vehicle, indoor and outdoor fixed, etc.
- 3.5-54MHz (specifically affected by the length of the antenna and the degree of deviation of the standing wave)
- Tuning impedance range of 5Ω-1.2KΩ
- Can be used for various antennas, including long-line antennas (recommended), GP (recommended), inverted V, dipole, etc., to adjust standing waves and match the impedance of shortwave receivers. For antenna systems and feeder systems with baluns, the tuning range will be limited

Package Included:
- 1 x Set of Antenna Tuner

Instructions:
Connect the power cord to 11-14vDC power supply. Connect a shortwave radio to the IN RF line of the automatic tuner. Connect a ground wire. The antenna is connected to the ANT of the tuner (M seat or quick socket). With Am, fm, cw 10-20w well tuned (within swr1.5), you can use high power.

Attention:
If manual operation is required, you can press auto once, the small dot in the middle of the screen LC will disappear, and the instrument is in manual mode. Press it again to switch to automatic mode. In special cases, after pressing tune to reset, the LC combination is set to zero.

Package: Normally we use the standard exporting packaging. We also can according to clients' request .

 Shipping : 

1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier  we are co-operating at present.

2. By Air: Delivery from the Shanghai airport to customers’ destination city air port.

3. By Sea: Delivery from the Shanghai sea port .

Q1. Can I have a sample order?

A: Yes, we welcome sample order to test and check quality.

Q2. What about the lead time?

A: Samples arrived often need 3-5 days.

Q3. Do you have any MOQ (minimum order quality)limit?

A: Low MOQ, 1pc for sample checking is available.

Q4. How do you ship the goods and how long does it take to arrive?

A: We often ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is also optional.

Q5. How to proceed an order?

A: Initially, let us know your requirements or application. Besides, We quote according to your requirements or our suggestions. Thirdly, customers confirms the samples and places deposit for formal order. Finally, We arrange the production.

Q6. Is it acceptable to print my logo on the product?

A: Yes. Please inform us formally before our product and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?

A: Yes, we offer one-year warranty for our products.

Q8: How to deal with the flaw?

A: Our products are produced in strict quality control system and the percent of pass is often maintained over 99.8%

Please do not hesitate to contact me if you need any further information

Whatsapp/Tel/Wechat: 8619902906050

Web: 

Address: Room 303 Building 2,Youpin Cultural and Creative Park,Zhangkeng,Minzhi Street,Longhua District,518131,Shenzhen,China(Mainland)