Features:
- Standard 1U thin and light rack
- Dual-channel synchronous control 31-band DSP processing equalizer
- Each section with LED spectrum indication, real-time 31-band frequency point absolute accuracy 99%
- With noise reduction function of cutting-edge noise gate
- The input and output interface supports multiple types: TRS6.35/RCA/XLR XLR balanced interface
- EQ bypass:bypass the graphic equalizer in the signal path
- With save and recall function, 10 modes can be saved and recalled

Specifications:
- Power supply: 220V /110V
- Sound transmission gain: -1dB or 11dB
- Line input impedance: 15KΩ
- Line output impedance: 300Ω
- Frequency response: 20Hz-20kHz
- Signal to noise ratio: 82dB
- Power consumption: 30W

Package Included:
- 1 x Set of Audio Equalizer

Note:
- Other items pictured are not included in the package, for demonstration purposes only. Thank you for your understanding!

1. SAVE: Save button. Press the SAVE button, and turn the knob CONTROL or GAIN to select any mode from 1-10. The screen displays numbers 1-10. After confirming the mode, press SAVE to save the mode successfully.
2. RECALL: Recall button. Press the RECALL button, turn the knob CONTROL or GAIN to select any mechanical type from 1-10. The screen displays 1-10 number options. After confirming the mode, press RECALL to recall the mode successfully.
3. BYPASS: Pass-through button. Press the BYPASS button, the machine does not undergo any frequency band numerical adjustment, the screen displays -, and the current state is the pass-through function. Press the button again to cancel the pass-through function.
4. LCD display: Display the volume of the signal passing through the machine 01-100, save and recall mode 0-10, gain attenuation ±18db value, - through state.
5. CONTROL: System control knob. When the machine is stationary, turn the CONTROL knob to adjust the volume of the machine. Press the CONTROL knob to start frequency band parameter adjustment. Rotate the knob to jump to the 20-20K frequency band, and the blue light under the corresponding frequency band on the panel will flash. Rotate the GAIN knob to increase or decrease.
6. 20db-20K: 31-segment spectrum display light. 20db-20K frequency band selection. When the signal is input, the 31-segment signal light will change according to the corresponding frequency band signal. The green light indicates normal status. The yellow light indicates the warning state. The red light indicates the imminent state. The static state of the blue light represents normal. The flashing blue light means that the frequency band parameters can be attenuated and adjusted.
7.GAIN: Parameter gain attenuation knob. When the machine is stationary, turn the GAIN knob to adjust the machine volume. Press the GAIN knob to start frequency band parameter adjustment. Rotate the knob to jump to the 20-20K frequency band, and the blue light below the corresponding frequency band on the panel will flash. It can be attenuated by turning the GAIN knob to increase, and it will automatically exit this function without any operation after blinking for 8 seconds.

Equalizer Operation Instructions:

Package: Normally we use the standard exporting packaging. We also can according to clients' request .

 Shipping : 

1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier  we are co-operating at present.

2. By Air: Delivery from the Shanghai airport to customers’ destination city air port.

3. By Sea: Delivery from the Shanghai sea port .

Q1. Can I have a sample order?

A: Yes, we welcome sample order to test and check quality.

Q2. What about the lead time?

A: Samples arrived often need 3-5 days.

Q3. Do you have any MOQ (minimum order quality)limit?

A: Low MOQ, 1pc for sample checking is available.

Q4. How do you ship the goods and how long does it take to arrive?

A: We often ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is also optional.

Q5. How to proceed an order?

A: Initially, let us know your requirements or application. Besides, We quote according to your requirements or our suggestions. Thirdly, customers confirms the samples and places deposit for formal order. Finally, We arrange the production.

Q6. Is it acceptable to print my logo on the product?

A: Yes. Please inform us formally before our product and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?

A: Yes, we offer one-year warranty for our products.

Q8: How to deal with the flaw?

A: Our products are produced in strict quality control system and the percent of pass is often maintained over 99.8%

Please do not hesitate to contact me if you need any further information

Whatsapp/Tel/Wechat: 8619902906050

Web: 

Address: Room 303 Building 2,Youpin Cultural and Creative Park,Zhangkeng,Minzhi Street,Longhua District,518131,Shenzhen,China(Mainland)