JDS6600-15M Dual Channel Function Arbitrary Waveform Signal Generator Pulse Signal Source Frequency Meter

Product Description:
- Dual-channel function signal generator from this series is a multi-functional signal generator with high precision and high performance. It adopts large scale of FPGA integrated circuits, high-speed MCU microprocessor and with high precision oscillator as base in the inner circuit, which make the signals more stable.
- SMT process can greatly improve the anti-interference and lifetime of the instrument. It has entirely independent dual-channel DDS signal and TTL level output, can generate signals of sine/triangle/square/sawtooth/pulse wave, white noise, etc.
- This instrument is of perfect combination for high usability, excellent technical parameters and multiple functions in generating signal, scanning waveform, measuring parameters and use aspects. It's a great testing or measuring instrument for electronics engineers, electronic laboratory, teaching and researching.

Features:
- 1.Adopt 320*240 2.4" TFT color LCD display, simultaneously display parameters of CH1 and CH2,Ability to reproduce patterns of custom waveform.
- 2.Use soft silicone keys instead of traditional patch keys, high sensitivity and convenient for operation.
- 3.Using DDS direct digital synthesis technology to generate precise, stable and low distortion output signal.
- 4.Max. output frequency(sine wave) up to 15MHz/30MHz/40MHz/50MHz(optional), 200MSa/s sampling rate and 14bits vertical resolution.
- 5.Completely independent dual channels output, synchronizing operation and adjustable phase difference.
- 6.Great improvement for square wave performance, square frequency range up to15MHzwith no distortion.
- 7.60 groups of arbitrary wave storage function, memory depth of each group is 2048*14bits.
- 8.High frequency accuracy and resolution: frequency accuracy up to 10^(-6) magnitude, total range frequency resolution is 0.01uHz.
- 9.High amplitude resolution: the minimum amplitude resolution can reach 1mV, amplitude range is 0Vpp~20Vpp.
- 10.Duty-cycle of each channel can be adjusted independently0.1%-99.9%, the adjusting resolution is 0.1%.
- 11.Pulse pulse width and pulse cycle time is precisely adjustable, adjust the range of 30nS-4000S
- 12.Scanning features: linear sweep and logarithmic sweep functions; 0.1s-999.9s sweep time; sorward, backward and roundtrip sweep directions.
- 13.With pulse trains burst output function, allow the unit output 1~1048575 arbitrary pulse trains.
- 14.Measurement functions: can measure signal frequency, cycle, positive/negative pulse width and duty cycle; 1Hz~100MHz frequency range.
- 15.-9.99V~9.99V DC offset range, offset resolution: 0.01V.
- 16.With digital signal output function, CMOS output range 0~10V.
- 17.Storage feature: can store 100 groups of parameters set by the user and extract at any time.
- 18.Counter function: with DC and AC coupling modes.
- 19.Arbitrary wave editing function: user can edit arbitrary wave on PC and then download to
- 20.Output from the instrument.
- 21.Communication function: the PC can be used to control the instrument.
- 21.With output short-circuit protection: all signal output can work 60s under load short-circuit condition.

Frequency Characteristic:
- Mode: JDS6600-15M      
Sine frequency range:0~15MHz
Square frequency range:0~15MHz    
Triangle frequency range:0~15MHz                
Pulse frequency range:0~6MHz  
TTL digital frequency range:0~6MHz                 
Arbitrary wave frequency range:0~6MHz                
Square rise time:≤25nS
Pulse width adjustment range:150nS-4000S
Mininum Frequency resolution:0.01µHz (0.00000001Hz)
Frequency accuracy:    ±20ppm
Frequency stability:±1ppm/3h
- Waveform Characteristic:
Waveform:Sine, Square, Triangle, Pulse (duty-cycle correction,Pulse width and cycle time adjustable), Arbitrary wave, CMOS, DC level, Half-wave, Full-Wave, Pos-Ladder, Neg-Ladder, Noise, Exponential Rise, Exponential Fall, Tone, Cink pulse, Lorentz Pulse, and 60 kinds user defined waveform.
Waveform length:2048 points
Waveform sampling rate:200MSa/s
Waveform vertical resolution:14 bits
Sine:Harmonic suppression:≥45dBc(<1MHz); ≥40dBc(1MHz~20MHz)
    Total harmonic distortion:<0.8%(20Hz~20kHz,0dBm)
Square and Pulse:Overshoot (Square):≤5%
                 Duty-cycle range (Pulse):0.1%~99.9%
Ramp wave:Linearity:≥98%(0.01Hz~10kHz)
- Output Characteristics:
Amplitude range:Frequency≤10MHz    
    0Vpp~20Vpp
Amplitude resolution:1mV
Amplitude stability:±0.5%/5 h
Amplitude flatness:±5%(<10MHz); ±10%(>10MHz)
-Waveform Output
Output impedance:50Ω±10%(typical)
Protection:Short circuit 60S will not be damaged
- DC Offset
Offset adjusting range:Output amplitude >4V
                          -9.99V~9.99V
Offset resolution:0.01 V
- Phase characteristic
Phase adjusting range:0~359.9o
Phase resolution:0.1o
- TTL/COMS Output
Low level:<0.3V
High level:1V~10V
Level rise/fall time:≤20ns
- External Measurement Function
Frequency meter function:Frequency measurement range:1Hz~100MHz
    Measurement accuracy:Gate time continuously adjusted between 0.01S~10s
Counter function:Counting region:0-4294967295
    Coupled mode:2kinds Coupling modes, DC and AC
    Counting mode:Manual operation
Input signal voltage range:2Vpp~20Vpp
Pulse width measurement:0.01ns (resolution),20s (MAX measuring time)
Period measurement:0.01ns (resolution),20s (MAX measuring time)
- Sweep Function
Sweep channel:CH1 or CH2
Sweep type:linear sweep,log sweep
Sweep time:0.1s~999.9s
Setting range:Arbitrarily set between start point and stop points
Sweep direction:Forward, backward and round trip
- General technical parameters
Display:Display type:2.4 inch TFT color LCD
Storage and loading    Quantity:100 groups
    Location:00 to 99 (extract 00 place data at default boost state)
Arbitrary wave:quantity:1 to 60, totally 60 groups (default boost 15 groups)
Interface:Interface mode:USB to serial interface
    Extension interface -:There is serial interface of TTL level mode to be convenient for secondary development.
    Communication speed:Adopt standard 115200bps
    communication protocol:Adopt command-line mode, open protocol
Power supply:Voltage range:DC5V±0.5V
manufacturing process:Surface-mount technology, large scale integrated circuit, high reliability, long service life
Warning tone:The user can set ON or OFF by procedure
Operating characteristics:Full button operation, knob continuous adjustment
Environmental conditions:Temperature:0~40^oC^,Humidity:<80%
Outer packaging dimension:240*210*95mm

English manual:http://68.168.132.244/JDS6600_EN_manual.pdf

Communication protocol and software link: http://68.168.132.244/DDS_Setup.rar

Operation demonstration video: /juntek


Package List:
- 1 x  JDS6600-15M     
- 1 x  DC adapter    
- 1 x  USB cable    
- 2 x  Signal output cable    
- 1 x  User manual (PDF)     
- 1 x  CD     

Detail photo

FAQ 

Q1. Can I have a sample order?

A: Yes, we welcome sample order to test and check quality.

Q2. What about the lead time?

A: Samples arrived often need 3-5 days.

Q3. Do you have any MOQ (minimum order quality)limit?

A: Low MOQ, 1pc for sample checking is available.

Q4. How do you ship the goods and how long does it take to arrive?

A: We often ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is also optional.

Q5. How to proceed an order?

A: Initially, let us know your requirements or application. Besides, We quote according to your requirements or our suggestions. Thirdly, customers confirms the samples and places deposit for formal order. Finally, We arrange the production.

Q6. Is it acceptable to print my logo on the product?

A: Yes. Please inform us formally before our product and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?

A: Yes, we offer one-year warranty for our products.

Q8: How to deal with the flaw?

A: Our products are produced in strict quality control system and the percent of pass is often maintained over 99.8%

Packing&Shipping

Package: Normally we use the standard exporting packaging. We also can according to clients' request .

 Shipping : 

1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier  we are co-operating at present.

2. By Air: Delivery from the Shanghai airport to customers’ destination city air port.

3. By Sea: Delivery from the Shanghai sea port .

Company information

TZT has been speciliazing in Business & Industry,Hobbies & Toys,CNC Products and Health care supplies for over 5 years.We committed to enhance customer satisfaction by continually improving the process with a vision of expertise in the field. 
Aiming to provide high quanlity products and great service for buyer,we are strict on product quanlity control and offer instant communication service.Welcome to contact us!

Our Advantages:
-  Source only the best consumer goods and ensure the highest quality.
-  Streamline the buying and payment process, and make it as easy as possible.
-  Help the customers all over the world discover products and manufacturers in China.
-  The Shortest order processed time and speed delivery