Packing machine herbs food packaging machine Meat thermoforming packing machine

Detailed configuration:

1. The touch screen adopts a 7.0-inch Japanese Mitsubishi new generation true color series human interface control panel, PLC

Adopt the leading Japanese Mitsubishi products in the same level, the touch screen and PLC are both built-in

CPU, so that the device has extremely high communication expansion capabilities and response speed.

2. The servo system adopts the Japanese Mitsubishi control system, which is a high-efficiency and high-quality servo system with

It has higher motion performance and reliability, and can realize high-speed and high-precision positioning operation of the chain.

3. The Regina (large clamping force) wide open chain imported from Italy is suitable for various thicknesses of soft film,

The stretch forming of hard film and semi-hard film can be specially packaged, with long service life and strong tension.

There will be no phenomena such as loosening of the membrane, and it can work uninterrupted 24 hours a day.

4. Use electrical appliances from Japan, Europe, Taiwan, etc., with long service life and low failure rate.

5. The pneumatic part adopts Taiwan Airtech valve island pneumatic system, which has stable performance and long service life.

6. Original German (BUSCH) RA0203D environmentally friendly high-vacuum stretch vacuum packaging machine dedicated for pollution-free

Large vacuum pump, pumping 200 cubic meters per hour, the maximum vacuum of the vacuum pump reaches 0.1 mbar,

High vacuum, stable quality, durable and reliable.

7. Imported photoelectric tracking system, usable optical film, color cover film to ensure the alignment of the pattern position and reduce the cost.

Improve product quality.

8. The whole machine adopts a 20mm thick aluminum-magnesium alloy integrated plate structure, and the guide rails and wall panels are integrally extruded.

It has good stability and long service life, ensuring that the film will not run off the track.

9. The upper and lower film adopts a new type of tensioning system, which makes the film more precise, and there will be no deviation or looseness.

10. The forming, sealing, and lifting adopt a pneumatic lever-type independent lifting and self-locking system, with four front, back, left, and right

The direction is precisely positioned.

11. The cross-cutting knife works independently for a single knife, and is controlled by a computer, which is convenient for operation.

12. Equipped with an imported assembly waste automatic recycling system to keep the working environment clean.

13. The sealing heating plate is inlaid with multiple heating tubes, the sealing is flat, and the adhesion is good.

14. The forming, sealing, horizontal knife, and longitudinal knife parts are all equipped with safety protection systems and equipped with protective covers.

15. The equipment is equipped with warnings or protections such as power lack of phase, reverse phase, excessively high or low voltage, and regular mechanical lubrication.

The protection system is convenient for operators to use and adjust.

16. Automatic shutdown protection in case of failure and display the cause of the failure and treatment method on the computer, which can protect the machine

The device is not damaged, and it is convenient for the operator to deal with the fault.

17. The length of the equipment is about 6.5 meters.

18. It can be equipped with automatic coding or coding system (optional) according to user's product packaging requirements.

19. According to the user's product packaging requirements, fill in other gases on the basis of vacuuming (optional).

Upper film width 393-394mm

Lower film width 422mm

Vacuum degree ≤200Pa

Compressed air ≥0.6MPa

Cooling water ≥0.15MPa

Power supply 380V/50HZ

Total power 12KW

Machine weight 2000kg

Dimensions 6500×950×1860mm

List of main parts of DLZ-420 equipment

Programmable Logic Controller (PLC) : Mitsubishi, Japan

7-inch Wonderful Series Panel:  Mitsubishi, Japan

Servo system : Mitsubishi

Schneider AC contactor : Schneider, France

Germany Busch (BUSCH) Vacuum Pump (RA0203D):  Germany Busch

Regina chain:  Regina, Italy

Germany Shike proximity switch : Germany Shike

Taiwan Pneumatic Components:  Taiwan Airtec

Taiwan Cylinder:  Taiwan Airtec

Japan Izumi relay, push button switch:  Japan Izumi

Taiwan MEAN WELL Power :  Taiwan MEAN WELL

Japan Azbil Computer Temperature Control System 2LC:  Japan Azbil

Yangming Solid State Relay : Taiwan Yangming

Yangming Power Protector: Taiwan Yangming

Imitation of German automatic cooling system,: factory-made

National Military 101 Factory 20 mm thick corrosion-resistant aluminum alloy : wallboard Harbin

National Military Industry 101 Factory Corrosion-resistant Aluminum Alloy Integral Chain Track:  Harbin

Imported ABB series air switch:  USA ABB

Buzzer : South Korea

Germany SICK color mark sensor : Germany SICK

Equipment usage conditions:

1.  The length of the machine is about 7.2 meters, the width is 1 meter, and the height is 1.8-1.9 meters. When in actual use, there should be at least 1.0 meter space around. The water, electricity, and compressed air of the machine enter from the left side of the back of the machine.

2.  The equipment (each unit) has a three-phase five-wire system and needs to be connected to a three-phase live wire, a neutral wire, and a ground wire. The total power of the equipment is 15-20 kilowatts, and the normal operating power is about 15 kilowatts. Our company generally uses ten square (five-wire) national standard cables.

 Sherry

Luohe Orange Mechanical Equipment Co.,Ltd

Mobile/wechat/whatsapp:+8615939556928

Skype:sales02-orange; E: sales02(at)

Address: F5, Fortune PlazaSongshan Road, Luohe, Henan, China.

Meat thermoforming packing machine