High Strength Different Dimensions FRP/GRP Fiberglass Flanges

Frp flange is manufactured by the hand lay-up, contact molding and spray-up process. In hand lay-up and contact molding processes veil and alternate layers of mat and woven roving saturated with resin are applied on the mold. In spray-up process continuous strand roving is fed through a chopper gun, combined with catalyzed resin, and sprayed onto the mould surface.

3 Usage:connecting pipe line and keep its leakproofness,convenient for replacing pipe line .Easy to separate and check the situation of pipe line .easy to seal pipe line .

4 Dimensions: flange, hub, and neck thicknesses meet or exceed ASME Sec. X, ASME RTP-1, ASTM D3299, and PS 15-69.

5 Pressure Rating: Flanges are stocked in 50psi, 100psi, and 150psi. All bolt holes and bolt circles are per ANSI B16.5 150 lb. drilling.

6 Resin Coating: All bolt holes and spot facing are resin coated.

7 Abrasion Resistant Flanges: we can produce flanges to meet your specific requirements.

1,High Intensity

2,Corrosion Resistance

3,Flame retardant, heat resistance and good antifreeze

4,Good electric insulation properties

5,Flexible System

6,Finish high

7,Installation of the convenient

8,Light weight, ease of installation transport

9,A wide range of applications

10,Lightness and high strength, expedient method of connection and operation specification.