GRP FRP Fiber Glass Circular and Square Industrial Cooling Tower

A cooling tower is a device that cools water.Water in its flow with the air for heat exchange, mass exchange, resulting in a drop in water temperature.

The closed cooling tower USES water and coils to transfer heat through the wall of the pipe to transfer the heat of the cooling medium in the coils to reach the cooling purpose.Closed cooling tower of circulating water in the cooling tower inner loop only contact with the air heat exchange cooling coil again take plate heat pipe working medium, the filling water pipe hydrating properly, compared to the open type cooling tower, the most obvious characteristics of closed cooling tower is to increase the coil, in need of cooling liquid working medium flow in the steel plate of tube is not direct contact with water, through the wall heat transfer.

Motor
Fully enclosed type, with protection grade: IP55, and insulation class: F. Smooth operation, low failure rate. Options: Siemens,ABB motor, etc.
Fan and Reducer
Adopting low speed, big chord length and width of blade fan, with characteristic of stable wind speed, low noise, few eddy current and high efficiency, etc. Enough air flow can be easily get at low rotating speed of the fan, what's more, the cooling tower fan blade angle can also be adjusted according to different climate condition, therefore, the cooling tower can not only be ensured in the rough conditions but meet the operation requirements of users.
Infill
Brand new PVC infill is vacuum formed of 0.3 thickness or more thicker PVC film with excellent chemical and high distortion resistance, big coefficient of heat transfer, small wind resistance, high ventilation performance.
We have different materials to suit different water temperature. What's more, the PVC filler's compact package design is
convenient to take out for cleaning, and the special designed configuration of the filling incorporates the function of drift
eliminator, louver and wet deck surface.
Steel Structure
Hop-dip galvanized steel framework to keep the cooling tower great performance and long lifespan, good anti-corrosion, guarantee the use of more than 15 years. Stainless steel hardware parts are also available for options if somewhere special condition needed.
Distribution System
Hot water distribution system is used F.R.P parts, non-corrosive and long life, and are specially designed for uniform
distributing and ease of inspection. A distribution cover is attached on top to prevent water from splashing out and other dirt to come into the water.
Inspection Door
Inspection doors are used to provide a convenient access to the interior for inspection, maintenance, adjustment of the internal parts, like float valve, cleaning up the lift-out strainer and flushing of the water basin.

Hengshui Aoliande Trading Co., Ltd is a professional sales of FRP pipe, FRP tanks, FRP pultrusion profiles, FRP moulded products and complete sets of glass fiber reinforced plastic production equipment professional company, through the professional and technical development and the introduction, the company relies on advanced technology, exquisite craft, reliable quality and perfect service, and passed the ISO9001, ISO14001, OHSAS18001 management system certification, the company existing staff more than 50 people, annual sales of glass fiber reinforced plastic series of products 6000 tons, the products have been sold to all over the world, The United States, Brazil, Japan, Germany, India, Malaysia, Egypt and other countries have won the support and trust of new and old customers.

Major products:
FRP vessel and chemical
equipment in sets;
FRP high, medium & low pressure pipe
FRP septic tank
FRP molded & pultrused products
Electrolytic cell S/F, F/F oli storage tank
Whole set of FRP prodcution machines
Hengshui Aoliande Trade Co.,Ltd. not only have ability to sell & supply products, but also has design ability of material, structure and products, our company can provide customers with technical advice, supply of goods and material,
transportation,installation supervision etc service.
Main application:
Urban water supply and drainage
Desalination of sea water
Chemical industry
Metallurygy Brewing
Electric power
Oil storing
Sewage treatment
Building Municipal works
Highway facilities