FRP Water Cooling Tower 50 ton 100 ton 200 ton 250 ton 300 ton 500 ton cooling tower cross flow type

Product Introduction of FRP Cooling Towers

1.Tower Body:reasonable shape, steady air flow, high-quality material, bright color, anti-aging, high strength, light weight, corrosion resistant. The down tower body can be equipped with the spilled water, sewage and automatic feed pipe according to the order request. It can absorbent water directly from here so the cooling pool is not needed. In addition, it is equipped with the silencing mat to reduce the noise effectively.

2.Filler: adopts to the PVC wave plate, Increased lateral convex rib so it can enhance the redistribution capacity of the water, low resistance, the thermal performance is good, the adaptive temperature range is -50--70.

3.Water Distributor and water pipe: equipped with the stainless steel ball bearing, operation flexible and reliable. uniform water distribution. The material of water pipe is FRP and the closed water board is installed in the pipe to overcome the phenomenon of floating water. By the way, you can also choose the spray type water distribution system.

4.Fan: low noise and high efficiency fan. The blade of fan is plate airfoil type (aluminum alloy, steel, FRP )

5.Motor: Specially designed for the cooling tower. Low noise, saving energy,waterproof properties is good, waterproof properties is good and high efficiency.

6.Reduction Gear: Adopts to the polyester fiber reinforced neoprene belt transmission, high temperature resistant, high efficiency, low noise, don't stretch in the water so it can overcome the skid phenomenon, or the gear box connect with the motor together.(depend on the model)

7.Noise Elimination Device: Ultra low noise type cooling tower increase the sound absorption material outside the air intake, also equipped with the sound absorption grating in the tower body in order to achieve maximum noise reduction effect. There is shielding and absorption material trumpet sound absorption grating in the upper tower body air outlet to reduce the noise of the fan and motor.

8.Wind Inlet Window: Equipped with the FRP louver blade, Air resistance is small, so it is suitable for the northern region and the place that need to the cooling tower all year around.

9.Support Frame: all the steel frame are assembly type. The surface of support frame is galvanized and paint anti-corrosion. The fastener are all adopt hot dip galvanized steel.

Square Cooling Tower

New Type Hi-Efficient Filling

special flute design with smaller flute height,bigger surface area,and more adequately air-water exchange.Moreover,comparing with the similar fills in market,its resistance could reduce 10-20% under the same heat exchanging efficiency.

Cooling Tower Motor

FRP Cooling Tower Fans

Low noise and high efficiency fan. The blade of fan is plate airfoil type (aluminum alloy, steel, FRP )

Spray Nozzles

Spraying nozzles of cooling towers 

Drift eliminator

Drift eliminator of cooling towers

Water Distributor of FRP Cooling Tower

Water Distributor and water pipe: equipped with the stainless steel ball bearing, operation flexible and reliable. uniform water distribution. The material of water pipe is FRP and the closed water board is installed in the pipe to overcome the phenomenon of floating water. By the way, you can also choose the spray type water distribution system.

Fan stack (Vacuum Infusion Process)

Products of excellent performance,structural strength,rigidity and other physicalpropertiescanbeincreasedby30%~50%.
Products with stable quality and good repeatability.
Improving the anti-fatigue performance of products and reducing the structure weight.
Goodoverallperformanceoftheproductandhighprecision.
Low VOC emissions can improve the working environment.

Spraying Testing

We make spraying testing each time before delivery to ensure product quality.

Q: Are you trading company or manufacturer ?

A: We are a company with trading company and factory together. Our trading company is named Hengshui Aoliande Trading Co., Ltd and factory named Hengshui Jiubo Composites Co., Ltd. 

Q: I didn't see dimension info or find the size I need, can you make it per my requirements?

A: For FRP products, all dimesion can be customized. We can make it per client's requirement. 

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls send inquiry to us directly.