Industrial Cooling Tower Fill Sheet cooling tower pvc fillls

     Industrial Cooling Tower Fill Sheet cooling tower pvc fillls

2100 Plus OF is a higher performing, low-fouling film fill media with vertically offset flutes manufactured from rigid corrugated PVC sheets for counterflow cooling tower heat-transfer applications. The fill modules are solvent-welded for maximum strength and are resistant to UV, rot, fungus, organic / inorganic acids, alkalis, and chemicals normally found in cooling tower water. 

Modules are fabricated in 12", 24" and 48” depths, 12” to 24” widths, and in lengths up to 12’-0” in 2’ increments. Sheet spacing is 21mm and minimum heat transfer area (wetted surface) is 45 ft2/ft3. Standard PVC sheet mil thicknesses are 10 and 15 mil (after forming). Weight per cubic foot is approximately 1.6 lbs/ft3 for 10-mil packs and approximately 2.4 lbs/ft3 for 15-mil. Custom dimension modules and mil thicknesses are available upon request. 

 PVC SHEET PROPERTIES:

Cooling filter tower filling material, lower cooling tower fill media replacement price:
High Efficiency
Reduced Pressure Drop
Lower Fouling Potential
Solvent Welded for Maximum Strength and Pack Integrity
Material Complies with Cooling Technology Institute Standard 136
Available in PVC or HPVC Material

1. What’s your MOQ?