Home > Products > Stainless Section Steel > ms channel steel price galvanized steel c channel purlins
ms channel steel price galvanized steel c channel purlins
Negotiable
1 (Min.Order)
- 1000 per Month
- T/T Credit Card
You May Like
-
Suppliers of cold formed ASTM a36 galvanized steel C channel roof truss
-
Good Price flat bar price Mild Steel With Good Quality For Building
-
A36 S235jr steel carbon steel price per kg flat bar steel
-
Hot Rolled Flat Steel Origin in China flat steel other products stainless bar flat bar steel
-
Hot sale steel prices hot rolled flat iron, carbon flat bar weight 40x6mm
-
15 width en1.4301 stainless steel 304 flat steel
Product Description
Product categories
Product Details
201 Stainless Steel
Copper content: J4>J1>J3>J2>J5.
Carbon content: J5>J2>J3>J1>J4.
Hardness arrangement: J5, J2>J3>J1>J4.
The order of prices from high to low is: J4>J1>J3>J2, J5.
J1（Mid Copper）: The carbon content is slightly higher than J4 and the copper content is lower than J4. Its processing performance is less thanJ4. It is suitable for ordinary shallow drawing and deep drawing products, such as decorative board, sanitary products, sink,product tube, etc.
J2, J5:Decorative tubes: Simple decorative tubes are still good, because the hardness is high (both above 96°) and the polishing is morebeautiful, but the square tube or the curved tube (90°) is prone to bursting.
In terms of flat plate: due to the high hardness, the board surface is beautiful, and the surface treatment such as frosting,
polishing and plating is acceptable. But the biggest problem is the bending problem, the bend is easy to break, and the groove is easy to burst. Poor extensibility.
J3（Low Copper）: Suitable for decorative tubes. Simple processing can be done on the decorative panel, but it is not possible with a little difficulty. There is feedback that the shearing plate is bent, and there is an inner seam after breaking (black titanium,color plate series, sanding plate, broken, folded out with inner seam). The sink material has been tried to bend, 90 degrees, but it will not continue.
J4（ High Copper）: It is the higher end of the J series. It is suitable for small angle types of deep drawing products. Most of the products that require deep salt picking and salt spray test will choose it. For example, sinks, kitchen utensils, bathroom products, water bottles, vacuum flasks, door hinges, shackles, etc.
304 Stainless Steel
304 is a versatile stainless steel that is widely used to make equipment and parts that require good overall performance
(corrosion resistance and formability). In order to maintain the inherent corrosion resistance of stainless steel, steel must
contain more than 18% chromium and more than 8% nickel.
316 stainless steel
316 stainless steel has excellent corrosion resistance, atmospheric corrosion resistance, and high-temperature strength due to the addition of Mo, which can be used under harsh conditions; excellent work hardening (non-magnetic).
Equipment for seawater use,chemical, dye, papermaking, oxalic acid, fertilizer and other production equipment; photographs, food industry, facilities incoastal areas, ropes, CD rods, bolts, nuts.
430 stainless steel
Type 430 Stainless Steel is perhaps the most popular non-hardenable ferritic stainless steel available. Type 430 is known for good corrosion, heat, oxidation resistance, and its decorative nature.It is important to note that when well polished or buffed its corrosion resistance increases. All welding must occur at higher temperatures, but it is easily machined, bent, and formed.
Thanks to this combination it is used in a number of different commercial and industrial applications including:Furnace combustion chambers,Automotive trim and molding,Gutters and downspouts,Nitric acid plant equipment,Oil and Gas refinery equipment,Restaurant equipment,Dishwasher linings,Element supports and fasteners.etc.
Carbon content: J5>J2>J3>J1>J4.
Hardness arrangement: J5, J2>J3>J1>J4.
The order of prices from high to low is: J4>J1>J3>J2, J5.
J1（Mid Copper）: The carbon content is slightly higher than J4 and the copper content is lower than J4. Its processing performance is less thanJ4. It is suitable for ordinary shallow drawing and deep drawing products, such as decorative board, sanitary products, sink,product tube, etc.
J2, J5:Decorative tubes: Simple decorative tubes are still good, because the hardness is high (both above 96°) and the polishing is morebeautiful, but the square tube or the curved tube (90°) is prone to bursting.
In terms of flat plate: due to the high hardness, the board surface is beautiful, and the surface treatment such as frosting,
polishing and plating is acceptable. But the biggest problem is the bending problem, the bend is easy to break, and the groove is easy to burst. Poor extensibility.
J3（Low Copper）: Suitable for decorative tubes. Simple processing can be done on the decorative panel, but it is not possible with a little difficulty. There is feedback that the shearing plate is bent, and there is an inner seam after breaking (black titanium,color plate series, sanding plate, broken, folded out with inner seam). The sink material has been tried to bend, 90 degrees, but it will not continue.
J4（ High Copper）: It is the higher end of the J series. It is suitable for small angle types of deep drawing products. Most of the products that require deep salt picking and salt spray test will choose it. For example, sinks, kitchen utensils, bathroom products, water bottles, vacuum flasks, door hinges, shackles, etc.
304 Stainless Steel
304 is a versatile stainless steel that is widely used to make equipment and parts that require good overall performance
(corrosion resistance and formability). In order to maintain the inherent corrosion resistance of stainless steel, steel must
contain more than 18% chromium and more than 8% nickel.
316 stainless steel
316 stainless steel has excellent corrosion resistance, atmospheric corrosion resistance, and high-temperature strength due to the addition of Mo, which can be used under harsh conditions; excellent work hardening (non-magnetic).
Equipment for seawater use,chemical, dye, papermaking, oxalic acid, fertilizer and other production equipment; photographs, food industry, facilities incoastal areas, ropes, CD rods, bolts, nuts.
430 stainless steel
Type 430 Stainless Steel is perhaps the most popular non-hardenable ferritic stainless steel available. Type 430 is known for good corrosion, heat, oxidation resistance, and its decorative nature.It is important to note that when well polished or buffed its corrosion resistance increases. All welding must occur at higher temperatures, but it is easily machined, bent, and formed.
Thanks to this combination it is used in a number of different commercial and industrial applications including:Furnace combustion chambers,Automotive trim and molding,Gutters and downspouts,Nitric acid plant equipment,Oil and Gas refinery equipment,Restaurant equipment,Dishwasher linings,Element supports and fasteners.etc.
Product name | 17-4ph stainless steel sheet/plate manufacturer! |
Grade | 201,202,303, 303Cu,304,304L,316,316L,310S,316Ti,321,430,904L,etc. |
Standard | AISI,ASTM,DIN,JIS,BS,NB |
Certification | SGS,BV,IQI,TUV,ISO,etc. |
Origin | Tisco, baosteel, jiusteel ,etc. |
Specification | Wire: 0.01-10mm Strip: 0.05*5.0-5.0*250mm Bar: φ4-50mm;Length 2000-5000mm Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm |
Package | clients' requirement and Standard export sea-worthy packing |
Delivery time | 5-15 days subject to the clients' requirement and quantity |
Mechanical Property | ||||||||||
Grade | State | Hardness HV | Yield Strength | Tensile Strength | Elongation(%) | |||||
SUS304 | ANN | <200 | >205 | >520 | >40 | |||||
1/4H | 200-250 | >255 | >550 | >35 | ||||||
1/2H | 250-310 | >470 | >780 | >6 | ||||||
3/4H | 310-370 | >665 | >930 | >3 | ||||||
H | 370-430 | >880 | >1130 | -- | ||||||
SUS301 | ANN | <250 | >205 | >520 | >40 | |||||
1/4H | 250-310 | >470 | >780 | >35 | ||||||
1/2H | 310-370 | >510 | >930 | >10 | ||||||
3/4H | 370-430 | >745 | >1130 | >5 | ||||||
H | 430-490 | >1030 | >1320 | >3 | ||||||
EH | 490-550 | >1275 | >1570 | -- | ||||||
SH | >550 | >1500 | >1850 | -- | ||||||
SUS201 | ANN | <200 | >205 | >515 | >40 | |||||
1/4H | 200-250 | >250 | >550 | >35 | ||||||
1/2H | 250-310 | >470 | >780 | >6 | ||||||
3/4H | 310-370 | >665 | >930 | >3 | ||||||
H | 370-430 | >880 | >1130 | -- | ||||||
SUS430 | ANN | <200 | >205 | >450 | >22 | |||||
1/2H | 200-250 | >330 | >505 | >10 | ||||||
H | 250-310 | >420 | >750 | >6 | ||||||
SUS443 | ANN | <200 | >305 | >483 | >31 | |||||
SUS310S | ≤200 | <200 | >205 | >520 | >40 | |||||
SUS316L | ≤200 | <200 | >310 | >620 | >40 | |||||
Surface finish | Characteristics & Application |
NO.1 | Hot-rolled surface,annealed and pickled,can be used as cold-rolling material,industial tanks and chem i cal devices. |
NO.2D | Cold-rolled, an nealed and pick led with out skinpassing the dull prod ucts can be used as auto mo bile parts, build ing materrials and pipings. |
NO.2B | The surface brightness and flatness of NO.2B is better than NO.2D. Then through a special surfacetreament to improve its mechamical properties, N02B could nearly satisfy com pre hen sive uses. |
NO.3 | Polished with abra sive belt of grit #100#120,have bet ter bright ness with dis con tin u ous coarse stria, used as in ner and ex ter nal or na ments for building, elec tri cal ap pli anc es and kitchen uten sils etc. |
NO.4 | Polished with abrasive belt of grit #150#180, have better brightness with discontinuous coarse stria, but thinner than NO.3, are used as bathtud buildinginner and external ornaments electrical appliances, kitchen utensils and food processing equipment etc. |
HL | Polished with abrasive belt of grit #150-320 on the No.4 finish and has continuous streaks, mainly used as building ornaments, elevators, door of building, frontal plate etc. |
BA | Cold rolled, bright an nealed and skin passed, the prod uct has ex cel lent bright ness and good re flex iv i ty like mirror, used for lectrical appliances, mirror, kitch en apparatus, or na ment ma te ri als etc. |
Application
Domestic | cutlery, sinks, saucepans, washing machine drums, microwave oven liners, razor blades |
Transport | exhaust systems, car trim/grilles, road tankers, ship containers, ships chemical tankers, refuse vehicles |
Oil and Gas | platform accommodation, cable trays, subsea pipelines |
Medical | Surgical instruments, surgical implants, MRI scanners |
Food and Drink | Catering equipment, brewing, distilling, food processing |
Water | Water and sewage treatment, water tubing, hot water tanks |
Chemical/Pharmaceutical | pressure vessels, process piping |
Architectural/Civil Engineering | cladding, handrails, door and window fittings, street furniture, structural sections |
reinforcement bar,lighting columns, lintels, masonry supports |
packing
Company Profile
Workshop
F A Q
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below.
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below.
Contact Us
- Jiangsu Cunrui Metal Products Co., Ltd.
Product Categories
New Products
-
1084 hot rolled galvanized steel flat bar, high carbon ms spring steel flat bar
-
Prime quality steel flat bar for sale ss304 stainless steel flat bar
-
Hot Sale Straight 201 202 304 304L 316L 321 310S 904L 2205 Round Square Flat Stainless Steel Profile Bars
-
Hot Sale Factory Prices Flat Steel Profiles AISI 304 304L 316L 321 1mm-100mm Thick Stainless Steel Flat Bars
-
6mm Thickness Section Steel Profiles SUS 304 304L 316L 321 310S Stainless Steel Sheet Square Flat Bar with Good Prices
-
Solid Deformed Stainless Steel Section Profiles Round Square Rectangular Flat Bars with Competitive Prices
-
China Supplier AISI 201 202 304 304L 316L 321 310S 2205 904L Cold/Hot Rolled Stainless Flat Steel Bars
-
Prime Quality 304 304L Deformed Stainless Steel Flat Square Rectangular Solid Sheet Bars Made in China
-
AISI 304 304L 316L Hot/Cold Rolled Deformed 2B BA Mirror 8K Brushed Polished Stainless Steel Flat Profiles Bars
-
Professional 200 Series 201 202 Cold Rolled Hot Rolled 20-250mm Width Stainless Steel Slit Edge Flat Steel Bars
-
AISI 304 304L 316L 321 310S 904L 2205 Stainless Steel Profiles Rectangular Square Flat Bars For Construction Materials
-
AISI 201 202 304 304L 316L 321 Cold Rolled Stainless Steel Polished Brushed Mirror Flat Steel Bars For Sale
-
Hot Rolled 3.0-60mm Thickness No.1 Anneal Stainless Steel AISI 304 316L 321 310S 904L 2205 Flat Steel Bars
-
Rectangular Square Stainless Steel AISI 304 316 321 Grade Customized Deformed Flat Bars For Sale
-
AISI 201 202 304 304L 316L 321 Stainless Steel Cold Rolled 2B BA Hairline Mirror Satin Finished Profiles Flat Steel Bars
-
1.0mm-3.0mm Cold Rolled Grade 304 304L 316L 321 310S 2205 Stainless Steel 2B Finished Steel Sheet Flat Bars
-
Stainless Steel AISI 304 304L 316L 321 310S Square/Rectangular Flat Bars With Competitive Prices
-
Hot Sale AISI 304 304L 316 316L Hot Rolled Polished 2B/BA/Hairline/Satin/Mirror Stainless Steel Profile Steel Flat Bars
-
AISI 316 316L Hot Rolled Deformed Polished 2B/BA/Hairline/Satin/Mirror Stainless Steel Profile Steel Flat Bars
-
SUS 304 SS Profile Bars Stainless Steel 2B BA Hairline No.1 Finished Flat Steel With Standard Sizes Weights
-
Prime Quality AISI 316 316L Hot Rolled Deformed 2B/BA/Hairline/Satin/Mirror Stainless Steel Profile Steel Flat Bars
-
China Supplier Railing Hot Rolled DIN 174 Stainless Steel No.1 Finished Flat Steel Bar For Construction Materials
-
Hot Sale AISI 904L UNS N08904 Super Hot Rolled Deformed Stainless Steel Solid Angle Bar For Seawater Equipment
-
Condibe stainless steel 304 flat bar
Popular Searches
- Channel Band
- arch clamp
- ac size
- activate channel
- al sizes
- al size
- america size
- ams channel
- an channel
- an size
- anti size
- as channel
- as size
- at channel
- at size
- av channel
- away sizes
- and sizes
- ba channel
- ball channel
- block channel
- bt channel
- chrome slotted channel
- ca channel
- channel analyze
- channel grade
- channel intel
- channel mixes
- channel p
- channel ul
Recommended Products
- Processing support for pressure resistant and strong steel structures, processing of fixed length bolts, ball grid structures, construction of channel steel, bending, punching, welding, painting, Q235 and other materials
- Private Label Embedded Channel Steel Linear Channel Steel Trailer Channel Steel Used for Bearings
- Q235/Q345 /SS400 Hot Rolled U / C Section Shaped 3 - 5 Days 6m-12m Steel Channels
- Factory Direct Channel C U Shape Steel U Shape Channel C U Z Steel Channel Profile
- Stainless steel solid U-shaped channel steel light channel steel
- Low price gypsum punching light section steel C channel steel
- Hot dip galvanized U channel steel price metal construction steel c profile channel steel
- Perforated u shaped channel steel metal construction c channel punching channel steel
- Slotted channel U-shaped channel steel roof truss galvanized c channel steel
- Factory wholesale profile channel steel light channel hot rolled channel steel used for ceiling frames
- Hot rolled mild Customized steel channels C Channel steel U Channel steel
- Steel pillar box channel steel carbon channel steel
Find Similar Products By Category
- Metallurgy, Mineral & Energy > Steel & Products > Steel Channel
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Jiangsu Cunrui Metal Products Co., Ltd.
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
sales
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile