Home > Products > Stainless Steel Bar > astm a479 410 SUS410 STS410 S41000 stainless steel bar
astm a479 410 SUS410 STS410 S41000 stainless steel bar
Negotiable
1 (Min.Order)
- 1000 per Month
- T/T Credit Card
You May Like
-
S31254 F44 1.4547 smo254 stainless steel 254 smo bar
-
1.4501 (Alloy 100), S32760 Stainless Steel Bar
-
Nitronic 60 UNS S21800 HS High Strength round square bar
-
astm a276 F51/ 2205/ S31803 /1.4462 duplex stainless steel threaded round bar rod
-
aisi 316l stainless steel round bar price per kg
-
SS 304 316 Stainless Steel Round Bar Price Per KG
Product Description
Product categories
Product Details
201 Stainless Steel
Copper content: J4>J1>J3>J2>J5.
Carbon content: J5>J2>J3>J1>J4.
Hardness arrangement: J5, J2>J3>J1>J4.
The order of prices from high to low is: J4>J1>J3>J2, J5.
J1（Mid Copper）: The carbon content is slightly higher than J4 and the copper
content is lower than J4. Its processing performance is less thanJ4. It is suitable for ordinary shallow drawing and deep drawing products, such as decorative board, sanitary products, sink,product tube, etc.
content is lower than J4. Its processing performance is less thanJ4. It is suitable for ordinary shallow drawing and deep drawing products, such as decorative board, sanitary products, sink,product tube, etc.
J2, J5:Decorative tubes: Simple decorative tubes
are still good, because the hardness is high (both above 96°) and the polishing is morebeautiful, but the square tube or the
curved tube (90°) is prone to bursting.
are still good, because the hardness is high (both above 96°) and the polishing is morebeautiful, but the square tube or the
curved tube (90°) is prone to bursting.
In terms of flat plate: due to the high hardness, the board surface is beautiful, and the surface treatment such as frosting,
polishing and plating is acceptable. But the biggest problem is the bending problem, the bend is easy to break, and the groove is easy to burst. Poor extensibility.
J3（Low Copper）: Suitable for decorative tubes. Simple processing can be done on the decorative panel, but it is not possible with a little difficulty. There is feedback that the shearing plate is bent, and there is an inner seam after breaking (black titanium,color plate series, sanding plate, broken, folded out with inner seam). The sink material has been tried to bend, 90 degrees, but it will not continue.
J4（ High Copper）: It is the higher end of the J series. It is suitable for small angle types of deep drawing products. Most of the products that require deep salt picking and salt spray test will choose it. For example, sinks, kitchen utensils, bathroom products, water bottles, vacuum flasks, door hinges, shackles, etc.
304 Stainless Steel
304 is a versatile stainless steel that is widely used to make equipment and parts that require good overall performance (corrosion resistance and formability). In order to maintain the inherent corrosion resistance of stainless steel, steel must contain more than 18% chromium and more than 8% nickel.
316 stainless steel
316 stainless steel has excellent corrosion resistance, atmospheric corrosion resistance, and high-temperature strength due to the addition of Mo, which can be used under harsh conditions; excellent work hardening (non-magnetic).
Equipment for seawater use,chemical, dye, papermaking, oxalic acid, fertilizer and other production equipment; photographs, food industry, facilities incoastal areas, ropes, CD rods, bolts, nuts.
430 stainless steel
Type 430 Stainless Steel is perhaps the most popular non-hardenable ferritic stainless steel available. Type 430 is known for good corrosion, heat, oxidation resistance, and its decorative nature.It is important to note that when well polished or buffed its corrosion resistance increases. All welding must occur at higher temperatures, but it is easily machined, bent, and formed.
Thanks to this combination it is used in a number of different commercial and industrial applications including:Furnace combustion chambers,Automotive trim and molding,Gutters and downspouts,Nitric acid plant equipment,Oil and Gas refinery equipment,Restaurant equipment,Dishwasher linings,Element supports and fasteners.etc.
Product name | astm a479 410 SUS410 STS410 S41000 stainless steel bar |
Grade | 201,202,303, 303Cu,304,304L,316,316L,310S,316Ti,321,430,904L,etc. |
Standard | AISI,ASTM,DIN,JIS,BS,NB |
Certification | SGS,BV,IQI,TUV,ISO,etc. |
Origin | Tisco, baosteel, jiusteel ,etc. |
Specification | Wire: 0.01-10mm Strip: 0.05*5.0-5.0*250mm Bar: φ4-50mm;Length 2000-5000mm Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm |
Package | clients' requirement and Standard export sea-worthy packing |
Delivery time | 5-15 days subject to the clients' requirement and quantity |
Mechanical Property | ||||||||||
Grade | State | Hardness HV | Yield Strength | Tensile Strength | Elongation(%) | |||||
SUS304 | ANN | <200 | >205 | >520 | >40 | |||||
1/4H | 200-250 | >255 | >550 | >35 | ||||||
1/2H | 250-310 | >470 | >780 | >6 | ||||||
3/4H | 310-370 | >665 | >930 | >3 | ||||||
H | 370-430 | >880 | >1130 | -- | ||||||
SUS301 | ANN | <250 | >205 | >520 | >40 | |||||
1/4H | 250-310 | >470 | >780 | >35 | ||||||
1/2H | 310-370 | >510 | >930 | >10 | ||||||
3/4H | 370-430 | >745 | >1130 | >5 | ||||||
H | 430-490 | >1030 | >1320 | >3 | ||||||
EH | 490-550 | >1275 | >1570 | -- | ||||||
SH | >550 | >1500 | >1850 | -- | ||||||
SUS201 | ANN | <200 | >205 | >515 | >40 | |||||
1/4H | 200-250 | >250 | >550 | >35 | ||||||
1/2H | 250-310 | >470 | >780 | >6 | ||||||
3/4H | 310-370 | >665 | >930 | >3 | ||||||
H | 370-430 | >880 | >1130 | -- | ||||||
SUS430 | ANN | <200 | >205 | >450 | >22 | |||||
1/2H | 200-250 | >330 | >505 | >10 | ||||||
H | 250-310 | >420 | >750 | >6 | ||||||
SUS443 | ANN | <200 | >305 | >483 | >31 | |||||
SUS310S | ≤200 | <200 | >205 | >520 | >40 | |||||
SUS316L | ≤200 | <200 | >310 | >620 | >40 | |||||
Surface finish | Characteristics & Application |
NO.1 | Hot-rolled surface,annealed and pickled,can be used as cold-rolling material,industial tanks and chem i cal devices. |
NO.2D | Cold-rolled, an nealed and pick led with out skinpassing the dull prod ucts can be used as auto mo bile parts, build ing materrials and pipings. |
NO.2B | The surface brightness and flatness of NO.2B is better than NO.2D. Then through a special surfacetreament to improve its mechamical properties, N02B could nearly satisfy com pre hen sive uses. |
NO.3 | Polished with abra sive belt of grit #100#120,have bet ter bright ness with dis con tin u ous coarse stria, used as in ner and ex ter nal or na ments for building, elec tri cal ap pli anc es and kitchen uten sils etc. |
NO.4 | Polished with abrasive belt of grit #150#180, have better brightness with discontinuous coarse stria, but thinner than NO.3, are used as bathtud buildinginner and external ornaments electrical appliances, kitchen utensils and food processing equipment etc. |
HL | Polished with abrasive belt of grit #150-320 on the No.4 finish and has continuous streaks, mainly used as building ornaments, elevators, door of building, frontal plate etc. |
BA | Cold rolled, bright an nealed and skin passed, the prod uct has ex cel lent bright ness and good re flex iv i ty like mirror, used for lectrical appliances, mirror, kitch en apparatus, or na ment ma te ri als etc. |
Application
Domestic | cutlery, sinks, saucepans, washing machine drums, microwave oven liners, razor blades |
Transport | exhaust systems, car trim/grilles, road tankers, ship containers, ships chemical tankers, refuse vehicles |
Oil and Gas | platform accommodation, cable trays, subsea pipelines |
Medical | Surgical instruments, surgical implants, MRI scanners |
Food and Drink | Catering equipment, brewing, distilling, food processing |
Water | Water and sewage treatment, water tubing, hot water tanks |
Chemical/Pharmaceutical | pressure vessels, process piping |
Architectural/Civil Engineering | cladding, handrails, door and window fittings, street furniture, structural sections |
reinforcement bar,lighting columns, lintels, masonry supports |
packing
Company Profile
Workshop
F A Q
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below.
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below.
Contact Us
- Jiangsu Cunrui Metal Products Co., Ltd.
Product Categories
New Products
-
china factory price stainless steel bright round bar SS 431 440A 440B 440C 409 430 bar
-
China manufacturer hot rolled cold drawn forged 420 stainless steel square bar price per kg
-
Hot Sale 304L 1.4307 Stainless Steel Round Bar Price Per Kg
-
No. 1.7707, DIN 30crmnsia, AISI 4340 alloyed carbon steel round bar rod
-
Precipitation hardening stainless steel 17-7PH UNS S17700 ASTM A693 steel per kg
-
Stainless 316 304 310s 409 430 17-4ph 17-7ph 904l Round Rod Casting Bars Engine Valves Steel Bar
-
Raw Material AMS 5659 15-5pH Aviatic Hardening Steel Bar
-
Chinese manufacturer 32NiCrMo 14-5 alloy structural steel round bar rod
-
Both UnequaL Type steel galvanized angle bar Price Per KG Iron
-
angle bar sizes and thickness 1.5 x 1.5 angle iron universal angle steel
-
AISI 420/DIN 1.2083/JIS SUS420J2 Industry Alloy Stainless Steel Bar
-
ASME SA479 ASTM A479 UNS S30815 Stainless steel Bars
-
ASTM A484 A479 UNS N08904 1.4539 Stainless Steel Bars
-
ASTM/JIS Black/Bright/Mirror 1.5 inch cold rolled tapered stainless steel rod/bar
-
Cold drawn 32crmov12-10 H7 H8 H9 steel round bar rod
-
ASTM321 stainless steel square bar
-
Stainless Steel 17-4 PH ASTM A 564 Gr 630 Round Bar
-
SS 403 Stainless Steel Round Bar Rod Shaft
-
aisi 318 stainless steel rod bar
-
Super duplex stainless steel plate price per kg aisi 340 stainless steel round bar stainless steel bar
-
SS310 mirror polished mild stainless steel iron bar (round, flat, angle, square rod
-
1.4313 F6NM C54868 S41500 AISI CA 6-NM stainless steel round bars manufacturer
-
201 304 316 321 high quality hot rolled Stainless Steel Hexagonal Bar /round Rod Steel
-
321 904 stainless steel u channel c channel profile From China
Popular Searches
- metallic color
- certificate application
- stainless steel
- Square Bar
- Round Rod Bar
- Hexagonal Bar
- Heat Pipe
- Steel Pipe
- metal mineral
- Steel Sheet Coil
- Plate Set
- Flat Sheet
- Square Plate
- mirror sheet
- sheet set
- square steel
- hot rolled
- Plain Tube
- welded steel
- Chemical Stocks
- Stainless Steel Sheet
- Construction Materials Processing
- Construction Steel Plate
- Construction Material Stocks
- Tube Pipe
- Coil Pipe
- Laminated Sheet
- stainless steel food plate
- Tube Stainless Steel
- petroleum
Recommended Products
- Pickled, Bright, Polished Customized 1070 1050 Aluminum Round Tubes
- ASTM A312 Tp316 Stainless Steel Pipe Tubes with Pickled Finish
- 2b Ba Finish Polish Mirror Surface Stainless Steel Tube/Pipe A269 A213 304/304L/316L/317
- 50mm*1.5mm SUS 304 Ba Finish Mirror Round Stainless Steel Pipe Price
- JIS G3459 G3463 Standard SUS 304 316 Stainless Steel Pipe Seamless Steel Pipe SUS304TB/SUS304HTB
- ASTM A789 A790 Uns S31803 S31803 2205 S32205 2507 S32750 S30432 Duplex Stainless Steel Seamless Pipe
- ASTM A789 A790 Uns S31803 S31803 2205 S32205 2507 S32750 S30432 Duplex Stainless Steel Seamless Pipe
- ASTM A249 A789 TP304 304L 316L Welded Stainless Steel Tube Pipe
- ASTM A312 A789 A790 304 304L 316 2205 2507 Duplex Tubing Pipe Round Welded/Seamless Stainless Steel Tube
- ASTM A789 Uns 31260 Duplex Stainless Steel Pipe
- ASTM A312 304/304L/316316L/347/32750/32760/904L A312 A269 A790 A789 Stainless Steel Pipe
- ASTM A312 A269 A789 A790 201/304/304L/304h/309S/310S/316/316L/321/347/409/410s/430/431/904/904L/2205/2507 Seamless Welded Stainless Steel Pipe
Find Similar Products By Category
- Metallurgy, Mineral & Energy > Steel & Products > Stainless Steel
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Jiangsu Cunrui Metal Products Co., Ltd.
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
sales
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile