Home > Products > Stainless Steel Sheet/plate > Ultrasonic Testing Stainless Steel 17-4PH 17-7PH 630 904L plate sheet/coils
Ultrasonic Testing Stainless Steel 17-4PH 17-7PH 630 904L plate sheet/coils
Negotiable
1 (Min. Order)
- T/T Credit Card
You May Like
-
2205 , 2507 , 253MA , 254Mo , 631 , 654MO ,17-4pH stainless steel sheet / plate for decoration / construction
-
253mo stainless steel sheet 440A 440B 440C 17-4PH 2205 2507 Stainless Steel Plate
-
Free Sample For s17400 Material 17-4ph Astm a564 Stainless Steel Sheet
-
ASTM 631 17-4ph 17-7ph Stainless Steel Sheet with 2B/BA/Mirror surface
-
0.3mm 0.5mm Thick SUS630 17-4PH 304 Stainless steel sheet per kg prices
-
15-5PH 17-4PH SUS630 stainless steel sheet/plate price
Product Description
Product categories
Product Details
201 Stainless Steel
Copper content: J4>J1>J3>J2>J5.
Carbon content: J5>J2>J3>J1>J4.
Hardness arrangement: J5, J2>J3>J1>J4.
The order of prices from high to low is: J4>J1>J3>J2, J5.
J1（Mid Copper）: The carbon content is slightly higher than J4 and the copper content is lower than J4. Its processing performance is less thanJ4. It is suitable for ordinary shallow drawing and deep drawing products, such as decorative board, sanitary products, sink,product tube, etc.
J2, J5:Decorative tubes: Simple decorative tubes are still good, because the hardness is high (both above 96°) and the polishing is morebeautiful, but the square tube or the curved tube (90°) is prone to bursting.
In terms of flat plate: due to the high hardness, the board surface is beautiful, and the surface treatment such as frosting,
polishing and plating is acceptable. But the biggest problem is the bending problem, the bend is easy to break, and the groove is easy to burst. Poor extensibility.
J3（Low Copper）: Suitable for decorative tubes. Simple processing can be done on the decorative panel, but it is not possible with a little difficulty. There is feedback that the shearing plate is bent, and there is an inner seam after breaking (black titanium,color plate series, sanding plate, broken, folded out with inner seam). The sink material has been tried to bend, 90 degrees, but it will not continue.
J4（ High Copper）: It is the higher end of the J series. It is suitable for small angle types of deep drawing products. Most of the products that require deep salt picking and salt spray test will choose it. For example, sinks, kitchen utensils, bathroom products, water bottles, vacuum flasks, door hinges, shackles, etc.
304 Stainless Steel
304 is a versatile stainless steel that is widely used to make equipment and parts that require good overall performance
(corrosion resistance and formability). In order to maintain the inherent corrosion resistance of stainless steel, steel must
contain more than 18% chromium and more than 8% nickel.
316 stainless steel
316 stainless steel has excellent corrosion resistance, atmospheric corrosion resistance, and high-temperature strength due to the addition of Mo, which can be used under harsh conditions; excellent work hardening (non-magnetic).
Equipment for seawater use,chemical, dye, papermaking, oxalic acid, fertilizer and other production equipment; photographs, food industry, facilities incoastal areas, ropes, CD rods, bolts, nuts.
430 stainless steel
Type 430 Stainless Steel is perhaps the most popular non-hardenable ferritic stainless steel available. Type 430 is known for good corrosion, heat, oxidation resistance, and its decorative nature.It is important to note that when well polished or buffed its corrosion resistance increases. All welding must occur at higher temperatures, but it is easily machined, bent, and formed.
Thanks to this combination it is used in a number of different commercial and industrial applications including:Furnace combustion chambers,Automotive trim and molding,Gutters and downspouts,Nitric acid plant equipment,Oil and Gas refinery equipment,Restaurant equipment,Dishwasher linings,Element supports and fasteners.etc.
Carbon content: J5>J2>J3>J1>J4.
Hardness arrangement: J5, J2>J3>J1>J4.
The order of prices from high to low is: J4>J1>J3>J2, J5.
J1（Mid Copper）: The carbon content is slightly higher than J4 and the copper content is lower than J4. Its processing performance is less thanJ4. It is suitable for ordinary shallow drawing and deep drawing products, such as decorative board, sanitary products, sink,product tube, etc.
J2, J5:Decorative tubes: Simple decorative tubes are still good, because the hardness is high (both above 96°) and the polishing is morebeautiful, but the square tube or the curved tube (90°) is prone to bursting.
In terms of flat plate: due to the high hardness, the board surface is beautiful, and the surface treatment such as frosting,
polishing and plating is acceptable. But the biggest problem is the bending problem, the bend is easy to break, and the groove is easy to burst. Poor extensibility.
J3（Low Copper）: Suitable for decorative tubes. Simple processing can be done on the decorative panel, but it is not possible with a little difficulty. There is feedback that the shearing plate is bent, and there is an inner seam after breaking (black titanium,color plate series, sanding plate, broken, folded out with inner seam). The sink material has been tried to bend, 90 degrees, but it will not continue.
J4（ High Copper）: It is the higher end of the J series. It is suitable for small angle types of deep drawing products. Most of the products that require deep salt picking and salt spray test will choose it. For example, sinks, kitchen utensils, bathroom products, water bottles, vacuum flasks, door hinges, shackles, etc.
304 Stainless Steel
304 is a versatile stainless steel that is widely used to make equipment and parts that require good overall performance
(corrosion resistance and formability). In order to maintain the inherent corrosion resistance of stainless steel, steel must
contain more than 18% chromium and more than 8% nickel.
316 stainless steel
316 stainless steel has excellent corrosion resistance, atmospheric corrosion resistance, and high-temperature strength due to the addition of Mo, which can be used under harsh conditions; excellent work hardening (non-magnetic).
Equipment for seawater use,chemical, dye, papermaking, oxalic acid, fertilizer and other production equipment; photographs, food industry, facilities incoastal areas, ropes, CD rods, bolts, nuts.
430 stainless steel
Type 430 Stainless Steel is perhaps the most popular non-hardenable ferritic stainless steel available. Type 430 is known for good corrosion, heat, oxidation resistance, and its decorative nature.It is important to note that when well polished or buffed its corrosion resistance increases. All welding must occur at higher temperatures, but it is easily machined, bent, and formed.
Thanks to this combination it is used in a number of different commercial and industrial applications including:Furnace combustion chambers,Automotive trim and molding,Gutters and downspouts,Nitric acid plant equipment,Oil and Gas refinery equipment,Restaurant equipment,Dishwasher linings,Element supports and fasteners.etc.
Product name | 17-4ph stainless steel sheet/plate manufacturer! |
Grade | 201,202,303, 303Cu,304,304L,316,316L,310S,316Ti,321,430,904L,etc. |
Standard | AISI,ASTM,DIN,JIS,BS,NB |
Certification | SGS,BV,IQI,TUV,ISO,etc. |
Origin | Tisco, baosteel, jiusteel ,etc. |
Specification | Wire: 0.01-10mm Strip: 0.05*5.0-5.0*250mm Bar: φ4-50mm;Length 2000-5000mm Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm |
Package | clients' requirement and Standard export sea-worthy packing |
Delivery time | 5-15 days subject to the clients' requirement and quantity |
Mechanical Property | ||||||||||
Grade | State | Hardness HV | Yield Strength | Tensile Strength | Elongation(%) | |||||
SUS304 | ANN | <200 | >205 | >520 | >40 | |||||
1/4H | 200-250 | >255 | >550 | >35 | ||||||
1/2H | 250-310 | >470 | >780 | >6 | ||||||
3/4H | 310-370 | >665 | >930 | >3 | ||||||
H | 370-430 | >880 | >1130 | -- | ||||||
SUS301 | ANN | <250 | >205 | >520 | >40 | |||||
1/4H | 250-310 | >470 | >780 | >35 | ||||||
1/2H | 310-370 | >510 | >930 | >10 | ||||||
3/4H | 370-430 | >745 | >1130 | >5 | ||||||
H | 430-490 | >1030 | >1320 | >3 | ||||||
EH | 490-550 | >1275 | >1570 | -- | ||||||
SH | >550 | >1500 | >1850 | -- | ||||||
SUS201 | ANN | <200 | >205 | >515 | >40 | |||||
1/4H | 200-250 | >250 | >550 | >35 | ||||||
1/2H | 250-310 | >470 | >780 | >6 | ||||||
3/4H | 310-370 | >665 | >930 | >3 | ||||||
H | 370-430 | >880 | >1130 | -- | ||||||
SUS430 | ANN | <200 | >205 | >450 | >22 | |||||
1/2H | 200-250 | >330 | >505 | >10 | ||||||
H | 250-310 | >420 | >750 | >6 | ||||||
SUS443 | ANN | <200 | >305 | >483 | >31 | |||||
SUS310S | ≤200 | <200 | >205 | >520 | >40 | |||||
SUS316L | ≤200 | <200 | >310 | >620 | >40 | |||||
Surface finish | Characteristics & Application |
NO.1 | Hot-rolled surface,annealed and pickled,can be used as cold-rolling material,industial tanks and chem i cal devices. |
NO.2D | Cold-rolled, an nealed and pick led with out skinpassing the dull prod ucts can be used as auto mo bile parts, build ing materrials and pipings. |
NO.2B | The surface brightness and flatness of NO.2B is better than NO.2D. Then through a special surfacetreament to improve its mechamical properties, N02B could nearly satisfy com pre hen sive uses. |
NO.3 | Polished with abra sive belt of grit #100#120,have bet ter bright ness with dis con tin u ous coarse stria, used as in ner and ex ter nal or na ments for building, elec tri cal ap pli anc es and kitchen uten sils etc. |
NO.4 | Polished with abrasive belt of grit #150#180, have better brightness with discontinuous coarse stria, but thinner than NO.3, are used as bathtud buildinginner and external ornaments electrical appliances, kitchen utensils and food processing equipment etc. |
HL | Polished with abrasive belt of grit #150-320 on the No.4 finish and has continuous streaks, mainly used as building ornaments, elevators, door of building, frontal plate etc. |
BA | Cold rolled, bright an nealed and skin passed, the prod uct has ex cel lent bright ness and good re flex iv i ty like mirror, used for lectrical appliances, mirror, kitch en apparatus, or na ment ma te ri als etc. |
Application
Domestic | cutlery, sinks, saucepans, washing machine drums, microwave oven liners, razor blades |
Transport | exhaust systems, car trim/grilles, road tankers, ship containers, ships chemical tankers, refuse vehicles |
Oil and Gas | platform accommodation, cable trays, subsea pipelines |
Medical | Surgical instruments, surgical implants, MRI scanners |
Food and Drink | Catering equipment, brewing, distilling, food processing |
Water | Water and sewage treatment, water tubing, hot water tanks |
Chemical/Pharmaceutical | pressure vessels, process piping |
Architectural/Civil Engineering | cladding, handrails, door and window fittings, street furniture, structural sections |
reinforcement bar,lighting columns, lintels, masonry supports |
packing
Company Profile
Workshop
F A Q
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below.
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below.
Contact Us
- Jiangsu Cunrui Metal Products Co., Ltd.
Product Categories
New Products
-
Factory Direct Sales 17-4ph 630 1.4542 2b 2d 4b Ba Hl Mirror Brush No. 1 No. 4 8k Stainless Steel Sheet Plate
-
aisi 430 BA/2B/NO.4 stainless steel sheet plate
-
ASTM 410 420 430 440C STAINLESS STEEL PLATE Price Per Ton 2B BA Finish
-
sus 410 304 Plate Price Per Ton 2B Finish Mirror 0.6Mm Stainless Steel Sheet plate
-
ASTM 1mm Stainless steel sheet,440C (9Cr18MoV) N695 SAE 51440C AISI 440C UNS S44004
-
ASTM stainless steel sheet and plates 0.6 mm thick /440c 0.5mm stainless steel sheet pvc film
-
SS AISI ASTM 2B Finishing 0.8mm 440c stainless steel shim plate
-
Stainless steel sheet conveyor belt/weave belt/wire ring mesh
-
Aisi 306 304L Ba 304 2B Finish 1D N4 Cold Rolled Coils 302 HQ Stainless Steel Coil/sheet
-
Aisi 302 303 308 309 306L 310S 314 L 318 Stainless Steel Plate Sheet Price, 304 306 340 Grade
-
DIN1.4003 1.4027 1.4101 1.4016 1.4301 1.4318 1.4402 1.4528 1.4581 1.4828 Stainless Steel Sheet Plate Price Per Kg
-
stainless steel 631 17-7PH NO.1 hot rolled plate and coils in stock
-
ASTM A240 201 202 304 303 316 310S 409 430 2B BA No.4 Finish Stainless Steel Plate
-
ASTM 304 316L 0.5 0.6 0.8 1.2 1.5 2 mm Thickness Stainless Steel Sheet SS Plate
-
304 Price Per Kg Malaysia Lamina De Acero Inoxidable 304 Price Per Ton Of Stainless Steel PLATE
-
Wholesale Monel400 ASTM Stainless Steel Plate / Steel Sheet Price
-
S400 304 Gold Colored Embossing Decorative Stainless Steel Sheet 304 8K Mirror Stainless Steel Sheet
-
ASTM A240 2B 321 316 304 Stainless Steel Sheet / Stainless Steel Plate
-
AISI 201 304 316 316l 430 2B BA Stainless Steel Sheet and Plate Manufacturer Price Per Kg
-
1.5Mm 1.4304 1.4310 Stainless Steel Sheet Price Per Kg
-
1.4301 1.4319 price stainless steel sheet 3 mm in stock
-
301 stainless steel sheet 4x8 6mm
-
300 series 301 302 304 stainless steel sheet and plates/coil/strip price per ton
-
AISI Cold Rolled 2B Surface 304 304L 301 321 Stainless Steel Sheets/Plate/Coil/Strips
Popular Searches
- metallic color
- certificate application
- stainless steel
- Square Bar
- Round Rod Bar
- Hexagonal Bar
- Heat Pipe
- Steel Pipe
- metal mineral
- Steel Sheet Coil
- Plate Set
- Flat Sheet
- Square Plate
- mirror sheet
- sheet set
- square steel
- hot rolled
- Plain Tube
- welded steel
- Chemical Stocks
- Stainless Steel Sheet
- Construction Materials Processing
- Construction Steel Plate
- Construction Material Stocks
- Tube Pipe
- Coil Pipe
- Laminated Sheet
- stainless steel food plate
- Tube Stainless Steel
- petroleum
Recommended Products
- 316L 316ti Cold Rolled Stainless Steel Sheet for Chemical Durability
- Stainless Steel Pipe Welded Super Duplex Ship Building Factory Use Big Od LSAW Pipes
- 304 304L 316 316L 310S 321 Sanitary Seamless Stainless Steel Tube / Ss Pipe with Low Price
- 304 Cold Rolled Gold Stainless Steel Sheet Super Mirror 316 316L Corrugated Steel Sheet
- Low Price Dx52D Z275 Galvanized Steel Sheet 1mm 2mm Thickness
- Factory Price Customized Size Aluminum Plate 5052/5083/6061/6063/8011/7075aluminium Sheet Price
- AISI 201 304 304L 316 316L Stainless Steel Sheet 2b Ba No. 4 Hl Surface
- 1.0mm*1219mm 310S 309S 321 409 436 439 904L 2205 2b Polished Stainless Steel Roll Hot/Cold Drawned with Smooth Edge
- Stainless Steel Roll 304 321 316L 310S 2205 Stainless Steel Plate Stainless Steel Roll Can Be Drawn Mirror
- Wholesale High Strength Corrosion-Resistant Stainless Steel Coil/Roll for Construction Field Price
- Hot and Cold Rolling 304 201 316 430 2205 Weldable Mirror Brushed Stainless Steel Roll
- Cold/Hot Rolled 2b/Ba/No. 4 Stainless Steel Coil Price
Find Similar Products By Category
- Metallurgy, Mineral & Energy > Steel & Products > Stainless Steel
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Jiangsu Cunrui Metal Products Co., Ltd.
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
sales
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile