High precision Foam tape kiss -cut Slitting Machine HX-320BF

4.Material unwinding air shaft

 Material unwinding air shaft for automatic blank label rotary die cutting machine ,it supports a simple material roll with

light weight .better less than 40KG ,this shaft is connected with EPC system ,it can move left or right to keep material

at straight line 

5.EPC photo cell 

This machine is equipped with two sets of photo cells . It can sensor the edge of roll material ,make sure the material

goes in straight line into die cutting station .

6.Discharge waste roller 

This machine is equipped with dischage waste roller with motor . 

The speed and power is adjustable ,and discharge direction is changeable too .It's easy to discharge the waste material .

7.Control panel 

You can control every functions in this control panel , the length ,piece quantity ,tension of each shaft ,die cutting speed ,

EPC system ,etc . It's convenient for workers to operate the machine .

8.Magnetic tension control 

All the shafts for unwinder and rewinder are magnetic tension brake and clutch .  

It's easy to control the tension at control panel .

9.Discharge waste air blower 

This air blower is for trimming the edge of finished rolls . When slitting ,you need trim the edge by slitting blade ,and the waste

can be blow out of the machine by this air blower .