Overhead hv line 33kv avr 200a single phase automatic voltage regulator(avr)

 Overhead hv line 33kv avr 200a single phase automatic voltage regulator(avr)

Description

ZBSVR, feeder voltage regulator, is a single-phase autotransformer, with 32 file intelligent controller switch, and the  controller to cooperate to complete 32 files, ZBSVR single-phase step voltage regulators are tap-changing autotransformers. They regulate distribution line voltages from 10% raise (boost) to 10% lower (buck) in thirty-two steps of approximately 5/8% each. Voltage ratings are available from 10000volts to 35000 volts  for 60 Hz and 50 Hz systems.Internal potential winding taps and an external ratio correction transformer are provided on all ratings so that each regulator may be applied to more than one system voltage. 

Application Site

Advantages

High accuracy: within the range of set voltage regulation, 32 steps on load automatic voltage regulator;
Long life: unique design of on load taps, to avoid the regulator arc, can ensure the operating life of nearly a million times;
Maintenance-free: fully sealed design, high protection level, excellent weatherability, long maintenance-free;
Flexibility: installed flexibly in the lines or substations, it can withdraw operation if necessary or open and close its regulator function;
Functions: it can be used directly with the SCADA system and complete distribution automation;
Low loss: single-phase design minimizes the iron loss, reducing load loss;
Economy: cost-effectively adjust the line voltage, dramatically reducing line losses and increase equipment life span.

Standard Features

SEL control box

Cutting-edge voltage regulation technology

Meets the needs of a smart grid world

Tap changer with motor and power supply

TAP CHANGER

Most advanced and fastest tap changer in the industry

Position indicator with ADD-AMP adjustment

Two laser-etched nameplates

Lifting lugs

Oil drain valve and sampling device

Upper filter press connection

Oil sight gauge

Mounting provisions for shunt arresters

High-creep bushings with clamp-type connectors

Bolt-down provisions (overhead units)

Pole-type mounting brackets (overhead units)

Substation base (substation units)

External series arrester

Automatic pressure relief device

Control cabinet with removable front panel

Ratio correction transformer

Conformally coated circuit boards

Voltage regulation of 32 steps (approximately 5/8% per steps) for a maximum of ± 10% in wye-connected banks

Advanced SEL SCADA-ready voltage regulator control

Tap changers: 32 steps in under 10 seconds

Voltage ratings are available from 2400 volts (60 kV BIL) to 34,500 volts (200 kV BIL) for 60 Hz and 50 Hz systems

Product support and expertise that is unmatched in the industry 

Shunt arresters

Single-phase step voltage regulator details

VOLTAGE REGULATION

32 step of regulation in step of 5/8%  for a total of 10% voltage boost to 10% voltage buck 

VOLTAGE RATINGS

2400 volts (60 kV BIL) to 34,500 volts (200 kV BIL) for 60 Hz and 50 Hz systems

OPTIONAL ACCESSORIES

Control cables up to 120’ long

4-hole NEMA spade bushing connectors

Nameplates in alternate languages and metric units

Internal potential transformer to measure source-bushing voltage

multi-phase control

Related products