2021 factory wholesale Multifunctional crushing vehicle for mobile crushing station of construction garbage crusher

Construction waste hammer crusher Product description of limestone hammer crusher:

The hammer crusher series products produced by Hongrun Machinery have various models, which can meet the production needs of various customers. It can also be customized according to the special needs of customers. It is suitable for medium and fine crushing of medium-hardness materials such as limestone, slag, coke, coal and other materials in cement, chemical industry, electric power, metallurgy and other industrial sectors.

The crushed materials are coal, salt, chalk, gypsum, brick and tile, limestone, etc. The hammer crusher is also used to crush the fiber structure, the broken wood with strong elasticity and toughness, paper or crushed asbestos cement waste to recover asbestos fibers and so on.

Hammer crusher can be used for crushing production line and sand production line.

Working principle of hammer crusher:
The hammer crusher mainly relies on impact energy to complete the crushing of materials. When the hammer crusher is working, the motor drives the rotor to rotate at high speed, and the material enters the crusher cavity evenly. The high-speed rotating hammer head impacts, shears and tears the material, causing the material to be crushed.

At the same time, the gravity of the material makes the material from The high-speed rotating hammer head rushes towards the baffle and sieve strip in the frame, and the material larger than the size of the sieve hole is retained on the sieve plate and continues to be hit and grinded by the hammer until it is crushed to the required discharge particle size and then discharged out of the machine through the sieve plate .

Product show of Construction waste hammer crusher:

Structural characteristics of stone crusher:
The main working part of the hammer crusher is the rotor with a hammer (also called hammer head). The rotor is composed of a main shaft, a disc, a pin and a hammer. The motor drives the rotor to rotate at high speed in the crushing cavity. The material is fed into the machine from the upper feed port and crushed by the impact, impact, shearing and grinding of the high-speed hammer. In the lower part of the rotor, there is a sieve plate, and the particle size smaller than the mesh size of the crushed material is discharged through the sieve plate, and the coarse particle size larger than the sieve size is retained on the sieve plate to continue to be hit and ground by the hammer, and then passes through the sieve plate Out of the machine.
The structure of hammer crusher:
It is composed of hammer crushing cabinet body, rotor, hammer head, impact liner and sieve plate.

Inner details of hammer stone crusher: