Widely Application Of Portable Wood Chipper with low factory price

                                                                  Portable Wood Chipper 

    The size of wood after being cut by the portable wood chipper  is small, and it can be sent to the crushing device for further crushing without drying.The portable wood chipper is based on the improvement of the dual motor wood grinder of our factory, which has introduced the advanced technology at home and abroad to make up for the problem of dust in the double motor wood grinder.

   The portable wood chipper mainly consists of chip cutting device, crushing device and fan.The size of wood after being cut by the chip cutting device is small, and can be sent to the crushing device for further crushing without drying.Compared with the hammer-type wood shredder, the structure of the wood grinder is more complex.

    The external structure is almost the same, including shell, base, belt pulley and draught fan. However, the internal crushing chamber is totally different.

Power:11-75kw

Capacity:400-3000kg/h

Product show:

Application of portable wood chipper:

   This portable wood chipper is mainly used for processing materials such as pine, miscellaneous wood, cottonwood, Chinese fir and raw bamboo.At the same time, it can also be used for cutting bamboo, thatch, corn stalk, sorghum stalk and other fiber culm like materials.
    It can process all kinds of materials such as branches and branches, skin and slats, small round center wood in diameter, castings, wood chips, bamboo, cotton pole, etc. into sawdust and wood filar products at one time. It has the advantages of less investment, low energy consumption, high productivity, good economic efficiency, and convenient use and maintenance.

Feature of portable wood chipper:

    There is a screen directly under the wood crusher Why say that this machine can easily damage the screen by crushing scraps and small pieces of wood?
    That's why:The crushing chamber of the lower crusher is divided into two parts. One part is the first crushing of the feeding mouth. Under the hammer plate is the wear-resistant plate without screen mesh, and the other part close to the inside is screen mesh.

   The first crushing of materials into the crushing cavity will not damage the screen mesh. Only when the material is crushed into small materials will it be sucked to another part of the screen mesh side by the induced draught fan. If there is no crushing bulk material, it will not be sucked to the other side. 

                                                       Before and after of portable wood chipper processing