Wafer Type Bottle Washing Machine Wide Mouth Bottle Washing Machine

Equipment introduction

The Bottle Washing and Drying machine is made of 304 stainless steel, and is equipped with a water receiving tray under the equipment. The shower cleaning device during the conveying process inside the washer is sprayed on all sides, and every corners can be covered. The blow-dry device is settled at the end to ensure the finished product can be used for packaging or filling straight away.

It is suitable for any types of bottles, such as long-neck bottles, jar, tin, can etc….

Working Principle 

The cleaning process is divided into three stages.

1, Pre-wash, using the spray nozzle to reducing or removing any greasy stuffs.

2, Key wash, giving high pressure spray all around with hot water, add soda or washing-up liquid if needed.

3, Rinsing, spraying all sides with clear water to avoid leaving stains and water marks on the bottle after drying.

Equipment feature

The cleaning process is divided into three stages.

1, Pre-wash, using the spray nozzle to reducing or removing any greasy stuffs.

2, Key wash, giving high pressure spray all around with hot water, add soda or washing-up liquid if needed.

3, Rinsing, spraying all sides with clear water to avoid leaving stains and water marks on the bottle after drying.

Equipment parameters