Home > Products > Pipe Extrusion Lines > Soft And Hard PVC Plastic Twin Screw Extrusion Granulator Production Line PVC Granule Making Machine
Soft And Hard PVC Plastic Twin Screw Extrusion Granulator Production Line PVC Granule Making Machine
Negotiable
1 (Min. Order)
- T/T Credit Card
You May Like
-
Automatic Single Screw Plastic PPR Pipe Extrusion Line Making Machine Production Line
-
1 Mould 2 Out PVC Electrical Conduit Pipe Extrusion Production Line Making Machine
-
20~63mm Glass Fiber PPR Pipe Production Line/ Reinforced PP-R Pipe Co-Extrusion Line/making Machine
-
Rigid PVC Electrical Conduit Pipe Extrusion Production Line Making Machine With Price
-
PVC Double Pipe Extrusion Production Line Making Machine With Electrical Conduit
-
UPVC Drainage Pipe Extrusion Line UPVC Water Supply Pipe Plastic Extruder Manufacturer
Product Description
Jiangsu Xinrongplas Machinery Co., Ltd.
Our main products are: plastic pipe extrusion line and plastic recycling machine.
The main products are popular in the domestic market,such as the East China market,Southwest market,Northeast market and Central China market.The products are also exported to international market,including Russia,Australia, Southeast Asia,Middle East,East Europe.Africa and other countries.
The main products are popular in the domestic market,such as the East China market,Southwest market,Northeast market and Central China market.The products are also exported to international market,including Russia,Australia, Southeast Asia,Middle East,East Europe.Africa and other countries.
Final Products
PVC Pipe.
1. It has good tensile and compressive strength: but its flexibility is not as good as other plastic pipes.
2. Low fluid resistance: The wall of PVC-U pipe is very smooth and has little resistance to fluid. Its roughness coefficient is only 0.009. Its water delivery capacity is 20% higher than that of cast iron pipes of the same pipe diameter and 40% higher than that of concrete pipes.
3. Excellent corrosion resistance and chemical resistance: PVC-U pipes have excellent acid resistance, alkali resistance, and corrosion resistance, and are not affected by damp water and soil pH. No anti-corrosion treatment is required when laying pipelines.
4. Anti-bite: PVC-U tube is not a source of nutrition, so it will not be corroded by rodents. According to a test conducted by the National Sanitation Foundation in Michigan, rats will not bite PVC-U pipes.
5. It has good water tightness: the installation of PVC-U pipes, regardless of whether it is connected by bonding or rubber ring, has good water tightness.
6. Performance test: curing time, shrinkage, splitting strength, tensile performance, peeling strength, thermal stability, pot life, storage period, release of harmful substances.
2. Low fluid resistance: The wall of PVC-U pipe is very smooth and has little resistance to fluid. Its roughness coefficient is only 0.009. Its water delivery capacity is 20% higher than that of cast iron pipes of the same pipe diameter and 40% higher than that of concrete pipes.
3. Excellent corrosion resistance and chemical resistance: PVC-U pipes have excellent acid resistance, alkali resistance, and corrosion resistance, and are not affected by damp water and soil pH. No anti-corrosion treatment is required when laying pipelines.
4. Anti-bite: PVC-U tube is not a source of nutrition, so it will not be corroded by rodents. According to a test conducted by the National Sanitation Foundation in Michigan, rats will not bite PVC-U pipes.
5. It has good water tightness: the installation of PVC-U pipes, regardless of whether it is connected by bonding or rubber ring, has good water tightness.
6. Performance test: curing time, shrinkage, splitting strength, tensile performance, peeling strength, thermal stability, pot life, storage period, release of harmful substances.
PE Pipe
PVC Pipe
PPR Pipe
Corrugated Pipe
PPR Fiberglass Pipe
Hollow Wall Winding Pipe
If you want to know more about Plastic Pipe Extrusion Line, inquiry us now!
Products Description
PVC Pipe Extrusion Line
Our company has full range of PVC pipe extrusion line, including four cavity pipe extrusion line, double cavity pipe extrusion line and large diameter pipe extrusion line. Our company will also provide basic formula for PVC pipe production, customer can adjust easily based on the formula. We manufacture machines for production of different PVC pipes, including U-PVC, C-PVC, M-PVC, PVC-O pipes, etc.
Our PVC pipe extrusion line can produce from size of minimum 16mm to 1000mm with single layer or multi-layer.
Our PVC pipe extrusion line can produce from size of minimum 16mm to 1000mm with single layer or multi-layer.
Twin Screw Extruder
1.1 Siemens PLC
1.2 Quality Screw and Barrel
1.3 Air Cooled Ceramic Heater
1.4 High Quality Gearbox and Distribution Box
1.5 Better Cooling of Gearbox
1.2 Quality Screw and Barrel
1.3 Air Cooled Ceramic Heater
1.4 High Quality Gearbox and Distribution Box
1.5 Better Cooling of Gearbox
1.6 Advanced Vacuum System
1.7 Easy Cable Connection
Both conical twin screw extruder and parallel twin screw extruder can be applied to produce PVC pipe. With latest technology, to
lower power and ensure capacity. According to different formula, we provide different screw design to ensure good plasticizing
effect and high capacity.
1.7 Easy Cable Connection
Both conical twin screw extruder and parallel twin screw extruder can be applied to produce PVC pipe. With latest technology, to
lower power and ensure capacity. According to different formula, we provide different screw design to ensure good plasticizing
effect and high capacity.
Extrusion Die Head
2.1 Moving Device of Die Head
2.2 Die Head Rotary Device
2.3 CNC Processing
2.4 High Quality Material
Extrusion die head apply bracket structure, each material flow channel is placed evenly. Each channel is after heat treatment,
mirror polishing and chroming to ensure material flow smoothly.
Die head is modular design, easy for changing pipe sizes, assembling, dismantle and maintenance. Can produce single layer or
multi-layer pipe.
2.2 Die Head Rotary Device
2.3 CNC Processing
2.4 High Quality Material
Extrusion die head apply bracket structure, each material flow channel is placed evenly. Each channel is after heat treatment,
mirror polishing and chroming to ensure material flow smoothly.
Die head is modular design, easy for changing pipe sizes, assembling, dismantle and maintenance. Can produce single layer or
multi-layer pipe.
Vacuum Tank
3.1 Strong Cooling for Calibrator
3.2 Better Support for Pipe
3.3 Silencer
3.4 Pressure Relief Valve
3.2 Better Support for Pipe
3.3 Silencer
3.4 Pressure Relief Valve
3.5 Double Loop Pipeline
3.6 Water, Gas Separator
3.7 Full Automatic Water Control
3.8 Centralized Drainage Device
Vacuum tank is used to shape and cool pipe, so as to reach standard pipe size. We use double-chamber structure. First chamber is
in short length, to ensure very strong cooling and vacuum function. As calibrator is placed in the front of first chamber and pipe
shape is formed mainly by calibrator, this design can ensure quick and better forming and cooling of pipe.
3.6 Water, Gas Separator
3.7 Full Automatic Water Control
3.8 Centralized Drainage Device
Vacuum tank is used to shape and cool pipe, so as to reach standard pipe size. We use double-chamber structure. First chamber is
in short length, to ensure very strong cooling and vacuum function. As calibrator is placed in the front of first chamber and pipe
shape is formed mainly by calibrator, this design can ensure quick and better forming and cooling of pipe.
Cooling Tank
4.1 Pipe Clamping Device
4.2 Water Tank Filter
4.3 Quality Spray Nozzle
4.4 Pipe Support Adjusting Device
4.5 Pipe Support Device
Cooling tank is used to cool pipe further.
4.2 Water Tank Filter
4.3 Quality Spray Nozzle
4.4 Pipe Support Adjusting Device
4.5 Pipe Support Device
Cooling tank is used to cool pipe further.
Haul off unit
5.1 Pipe Clamping Device
5.2 Water Tank Filter
5.3 Quality Spray Nozzle
5.4 Pipe Support Adjusting Device
5.5 Pipe Support Device
Haul off unit provides sufficient traction force to pull pipe stably. According to different pipe sizes and thickness, our company
will customize traction speed, number of claws, effective traction length. To ensure match pipe extrusion speed and forming speed,
also avoid deformation of pipe during traction.
5.2 Water Tank Filter
5.3 Quality Spray Nozzle
5.4 Pipe Support Adjusting Device
5.5 Pipe Support Device
Haul off unit provides sufficient traction force to pull pipe stably. According to different pipe sizes and thickness, our company
will customize traction speed, number of claws, effective traction length. To ensure match pipe extrusion speed and forming speed,
also avoid deformation of pipe during traction.
Cutter
6.1 Aluminum Clamping Device
6.2 Advanced Hydraulic System
6.3 Dust Collection System
Cutter controlled by Siemens PLC with chamfering function, working together with haul off unit to have precise cutting. Customer
can set the length of pipe they want to cut.
6.2 Advanced Hydraulic System
6.3 Dust Collection System
Cutter controlled by Siemens PLC with chamfering function, working together with haul off unit to have precise cutting. Customer
can set the length of pipe they want to cut.
Full Automatic Belling Machine
7.1 Pipe Cleaning System
7.2 Infrared Heating System
7.2 Infrared Heating System
7.3 Central Height Adjustment
To make socket at pipe end which is easy for pipe connection. There are three types of belling type: U type, R type and Square
type. We provide belling machine which can finish belling of pipe on line fully automatic. From minimum size 16mm to maximum size
1000mm, can with multi heating oven and belling station.
To make socket at pipe end which is easy for pipe connection. There are three types of belling type: U type, R type and Square
type. We provide belling machine which can finish belling of pipe on line fully automatic. From minimum size 16mm to maximum size
1000mm, can with multi heating oven and belling station.
Product Paramenters
Model | Pipe Range (mm) | Output Capacity (kg/h) | Main Motor Power (kw) |
PVC32SS* | 16 - 32 (x4) | 180 - 250 | 22 - 37 |
PVC63 | 16 - 63 | 180 - 250 | 22 - 37 |
PVC63SS* | 16 - 63 (x2) | 250 | 37 |
PVC110 | 20 - 110 | 250 | 37 |
PVC160 | 50 - 160 | 250 | 37 |
PVC250 | 75 - 250 | 450 | 55 |
PVC450 | 110 - 450 | 450 - 800 | 55 - 110 |
PVC630 | 250 - 630 | 800 | 110 |
PVC800 | 315 - 800 | 1000 | 132 |
PVC1000 | 400-1000 | 1200 | 160 |
S* means double-strand/cavity, two pipes produced at same time.
SS* means four-strand/cavity, four pipes produced at same time.
SS* means four-strand/cavity, four pipes produced at same time.
Production Line Parameter (for reference only, can be customized)
Recommend Products
Hollow Wall Winding Pipe Making Machine
Corrugated Pipe Machine
Plastic Pelletizing Machine
Plastic Recycling Machine
Why Choose Us
Jiangsu Xinrongplas Machinery Co., Ltd.
Jiangsu Xinrongplas was established in 1996. The production experience is mature and rich. Among them, it has been exporting for more than 20 years, and more than 100 countries have exported. The annual export turnover is about 15 million US dollars. Our company's production base covers more than 50,000 square meters. , Modern office and production room more than 35,000 square meters, with experienced high-quality staff team, first-class equipment, perfect and effective quality assurance system, advanced and complete testing equipment.
Workshop.
We know the quality is the life of our company. Our company insists to manufacture all machine units by ourselves in order to control quality strictly by our quality inspectors. To implement this concept, we have built our own tooling and CNC workshop. Even if some parts from our certified supplier, our quality inspector will check these parts before entering into our warehouse.
Warmly welcome to visit our workshop, and sincerely hope we can have long term cooperation in near future!
Warmly welcome to visit our workshop, and sincerely hope we can have long term cooperation in near future!
Certificates & Patents.
International certification, National Certificate of equipment verification, and more than 30 invention patents.
Verification Certificates of equipments: ISO; CE Certificate , SGS, COC, TUV National Certificate of equipment
verification:standard organisation of Nigeria , CNCA certificate, Logo trademark registration,etc.
Verification Certificates of equipments: ISO; CE Certificate , SGS, COC, TUV National Certificate of equipment
verification:standard organisation of Nigeria , CNCA certificate, Logo trademark registration,etc.
Exhibitions.
Xinrong Team.
After-Sales Team.
FAQ
1) Are we manufacture or trade company?
We are manufacture,have 24 years' experiences in this field.
2) What kind machines we produce?
Our factory produce plastic pipes machines, plastic recycling machine.
3) What kind payment we accept?
Payment term like T/T, L/C.
4) How long we need to produce the machines?
According to different machine model and configuation, we need different time, like 40 days to 2 months.
5) Will the machine be delivered on time ?
Sure,we will deliver your machine up recieving the balance payment.
6) How about the machine quality?
Our machine quality is reliable.We select every parts on the machine strictly and production and installation is done by
professional workers.We test the each production step for the best machine.
7) How about the price?
You know ,the goods counts the the price.We select the best machine raw material such as siemens electrics,schneider and ABB
etc.We will provide you the best machine with best price.
8) How long is your machine’s guarantee time?
One year
9) What can you provide for after sale service?
We can send engineers to your factory for installation and training.also 24 hours on-line service for you.
We are manufacture,have 24 years' experiences in this field.
2) What kind machines we produce?
Our factory produce plastic pipes machines, plastic recycling machine.
3) What kind payment we accept?
Payment term like T/T, L/C.
4) How long we need to produce the machines?
According to different machine model and configuation, we need different time, like 40 days to 2 months.
5) Will the machine be delivered on time ?
Sure,we will deliver your machine up recieving the balance payment.
6) How about the machine quality?
Our machine quality is reliable.We select every parts on the machine strictly and production and installation is done by
professional workers.We test the each production step for the best machine.
7) How about the price?
You know ,the goods counts the the price.We select the best machine raw material such as siemens electrics,schneider and ABB
etc.We will provide you the best machine with best price.
8) How long is your machine’s guarantee time?
One year
9) What can you provide for after sale service?
We can send engineers to your factory for installation and training.also 24 hours on-line service for you.
Contact Us
- Jiangsu Xinrong Science & Technology Development Co., Ltd.
Product Categories
| Auxiliary machines | Meltblown machine | Pipe Extrusion Lines | Plastic Recycling And Granulating Line |
| Profile Extrusion Lines | Sheet/board Extrusion Lines | Ungrouped |
New Products
-
New Type 20-63mm PVC Electric Conduit Pipe Production Line
-
63-160mm HDPE Pipe Production Line Machine
-
SJSZ65/132 Conic Twin Screw Plastic Extruder Machine PVC Extruder for PVC Pipe And PVC Profile
-
Low Price 630mm PVC Pipe Extruder Machine for Water Drainage Pipe
-
PVC Drainage Pipe Extrusion Line PVC Water Supply Pipe Plastic Extruder Manufacturer
-
PVC UPVC Double Pipe Extruder Machine /plastic One Mold Two Pipe Extrusion Line
-
Plastic PVC Powder Milling/pulverizer/grinder Machine
-
PE PP Pipe Extrusion Machine /plastic Pipe Extrusion Machine
-
50mm to 160mm PVC Pipe Extrusion Line Machine
-
20~200mm PE Pipe Making Machine Total Production Line Price
-
PVC Electrical Conduit Plant/PVC Double Pipe Line/PVC Machines Extruder
-
PVC Electric Conduit Pipe Making Machine Water Pipe Production Line Extruding Machine
-
20-63mm Plastic Upvc Pvc Pipe Electric Wire Extrusion Pvc Pipe Making Machine
-
90mm Supplier HDPE Pipe Making Machine Ppr Water Pipe Manufacturing Machine
-
PE Pipe Extrusion Line Making Machine Extruder Line
-
20~500mm HDPE PP PE Plastic Pipe Single Screw Extrusion Production Machine Line With Price
-
160mm Supplier HDPE Pipe Making Machine Ppr Pipe Extrusion Equipment /making Line
-
400mm Supplier HDPE Pipe Making Machine Ppr pe Polyethylene Pipe Machinery
-
110mm Supplier HDPE Pipe Making Machine Ppr Pipe Manufacturing Machine
-
160mm Supplier HDPE Pipe Making Machine Ppr Pipe Making Processing Extruder Making Equipment
-
16-40 mm PVC Electric Wire Pipe Extrusion Line Machine
-
HDPE Pipe Making Machine 20-110mm PPR Water Pipe Making Machine for Uzbekistan
-
Big Diameter Upvc Pipe Production Machine Line
-
Double Output Small PVC Water Pipe Extrusion Line
Popular Searches
- plastic extruder
- extrusion machine
- twin screw extruder
- aluminum tube production line
- foam board equipment
- production line
- extruding machine
- production equipment
- extrusion line
- belt making machinery
- extruder machine
- pet strap making machine
- pet belt making machine
- bubble film making machine
- cable manufacturing equipment
- plastic extrusion
- plastic machinery
- extruding equipment
- wire extruder
- cable extruding line
- cable extruder machine
- cable manufacturing machine
- decorative line
- extrusion production line
- engineering lab equipment
- eps machinery
- cement production line
- pipe making machine
- pipe production line
- board making machine
Recommended Products
- Xps Foam Board Production Line
- HDPE Pipe Production Line
- Petrochemical Granulation Equipment Use Polyolefin Pelletizing Die Plate
- Spare Parts Pelletizing Knife Holder Used for Granulating Polymer
- Spare Parts for Fixing Pelletizer Knives Pelletizing Cutting Disc
- PP PE Underwater Granulation System Use Knife Rotor
- Industrial Cutting Blade for Underwater Pelletizing Unit for Plastic Granules Manufacturing
- Intensive Heated Channel Die Plate for Producing PP PE Particles
- Underwater Pelletizing Unit Use Pelletizing Blade for Plastic Granules
- Pelletizing Die Plate for Underwater Polyethylene Pelletizing System Extruder
- Metal-ceramic Composit Pelletizer Knife for PP PE Plastic Granule Extruding
- Flexible Pelletizer Knife Holder for Underwater Cutting Plastic Granules Line Carrier for Pelletizer Knives
Find Similar Products By Category
- Manufacturing & Processing Machinery > Plastic Machinery > Plastic Extruder
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Jiangsu Xinrong Science & Technology Development Co., Ltd.
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
sales
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile