SYD-261 Automatic Pensky-Martens Closed-Cup PMCC Flash Point Tester Apparatus

This instrument is designed and manufactured as per standards GB/T 261-2008 Determination of Flash Point - Pensky-Martens closed cup method and ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester. It is used to make determination of the closed cup flash point of the petroleum products.

Technical specifications:
1. Power supply: AC( 220±10% )V, 50Hz.
2. Heating device: (1) The furnace is silicon carbide material. Power is 600W.
                        (2) The heating power is adjustable from 0 W to 600W.
3. Heating rate: Procedure A: (5~6)℃/min, Procedure B:(1~1.5)℃/min. 
                          Automatically controlled
4. Stirring device: (1)Stirring motor: BYGH101 stepping motor
                              (2) Driving mode: flexible shaft
                              (3) Shaft size: 8mm×40mm             
5. Stirring rate: Procedure A: (90~120)RPM, Procedure B: (250±10)RPM
6. Igniting device: (1) Igniting source: gas(or other civilian fuels,the same below)
                             (2) Electric ignition. Gas flame diameter:3.2mm~4.8mm
7. Temperature testing probe: RTD, PT100
8. Ambient temperature: ≤ 35℃
9. Relative humidity: ≤ 85%
10.Maximum power consumption: 650W 

I,SYD-261-1 Pensky-martins Closed Cup Flash Point Tester Accessories List and Documents

Full set of instrument

II,SYD-261-1 Pensky-Martens Closed-Cup Flash Point Tester Auxiliary Equipments 

Notes:
1.The reagent and equipments for installing the instrument are supplied by end-users 

themselves.
2.The usage,management and saving of poisonous and harmful reagent,pls operate according 

to the relative principle.
3.PLS read the operation manual and industry standard before using the instrument.

Installation and training

1.If buyers visit our factory and check the machine, we will teach you how to install and use the machine, and also train your workers/technician face to face.

2.Without visiting, we will send you user manual and video to teach you to install and operate.

3.If buyer needs our technician to go to your local factory, please arrange board and lodging and other necessary things.

After Service

1.One year guarantee for whole machine.

2.24 hours technical support by email or calling

3.If there is any problem found of the machine, we will repair it for free in one year.

We can delivery by sea at any port in China.

We also can ship by air via express company (door to door), it is quick and safe.

We can ship By EMS,TNT, DHL and others (door to door).

We supply various Concrete Test Apparatus, Cement Test Apparatus, Soil/Road Test Apparatus,Asphalt Test Apparatus, Concrete Test Cube Mould and other Lab Apparatus.

If you need any Apparatus, please contact us.

Q:Are you trade company or factory?

A:We are trade company but we also have own factories. Building trade company is just for exporting various types of concrete mould and others products.

Q:Why your price is higher than others?

A:As we persist on that each factory should put quality at the first place. We spend time and money on developing how to make machines much more automatic, accurate and high quality. We can make sure that our machine could use more than ten years without any problem. We can provide one years free quality assurance.

Q:How to visit your company?

A:1. Fly to Beijing airport: By high speed train From Beijing Nan to Cangzhou Xi (1 hour),then we can pick up you.

2.Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours), then we can pick you up.