Factory sale Asphalt Contact Furnaces/Burn off ovens for testing asphalt mixture/pavement samples

High quality Asphalt Content Ignition Furnace of Asphalt testing equipment, Asphalt Ignition, Oven Binder ignition oven

STANDARD: EN 12697-39. ASTM D6307, AASHTO TP53

The Asphalt Content/Binder ignition oven with internal automatic balance is an environmentally-friendly and costeffective method for the accurate determination of asphalt content.  

It is made of three parts: combustion device (furnace), weight measurement (electronic balance), test control and data processing (microcontroller unit).

At the bottom of the chamber there are four dia. 30mm tube ports. They are for four dia.16mm cast synthetic mica bars attached under a cordierite-mullite tray to get through the chamber, so that the tray can connect with the balance which could monitor the reduction in weight of the sample. Put the sample plate or basket on the tray for sample placement.

Above the furnace chamber there is fumes assembly chamber where the fume mixes with air before exhausted through the flue by the fan.

 Technical Parameters:

High quality Asphalt Content Ignition Furnace of A

High quality Asphalt Content Ignition Furnace of Asphalt testing equipment, Asphalt Ignition, Oven Binder ignition oven

 Your Asphalt Contact Furnaces/Burn off ovens can be shipped to  you by EMS,TNT,DHL and others ( door to door).

 If you have any problems about our asphalt content furnaces, contact us at any time!

Other asphalt Testing equipment-High Quality Automatic Extraction Apparatus