Home > Products > Other testing equipment > High Accuracy Laboratory Insulation Oil Automatic Dielectric Loss Analyzer TP-6100A
High Accuracy Laboratory Insulation Oil Automatic Dielectric Loss Analyzer TP-6100A
Negotiable
1 (Min. Order)
- T/T Credit Card
You May Like
-
DLT0812 Automatic Transformer Oil Dielectric Loss And Resistivity Test Equipment
-
ASTM D1816 Insulating Oil Breakdown Voltage Tester Oil Dielectric Strength Testing Equipment
-
IIJ-II Fully Automatic Insulating Oil Breakdown Voltage Tester
-
Compact Structure Lubricating Abrasion Testing Equipment LWT-2
-
Digital Display Stainless Steel Lube Oil/Grease Evaporation Loss Tester EL-7325
-
Micro Method Petroleum Products Carbon Residue Analyzer CS-0625
Product Description
Insulating Oil Tan Delta Tester and Resistivity Meter TP-6100A
TP-6100A Insulating oil dielectric loss and resistivity tester complies to ASTM D924, IEC and GB/T5654-2007 Liquid Insulating Material Relative Permittivity, Dielectric Loss Factor And DC Resistivity Measurements. Used for measuring the dielectric loss factor and DC resistivity of insulation oil and other liquid insulating medium. It is characterized by integrated structure, and integrates the dielectric loss of grease cup, temperature controller, temperature sensor, dielectric loss test bridge, AC test power, standard capacitor, high resistance meter, DC high voltage source and other major components. The instrument adopts intelligent automatic measurement, equipped with large screen (240*128) LCD display. Test results can be automatically stored and printed out so that the operator without professional training can use it easily.
1. Oil cup uses a three-electrode structure in line with GB / T5654-2007, the inter-electrode spacing of 2mm, can eliminate the impacts of stray capacitance and leakage impact on the dielectric loss test results. It has a drain solenoid switch, you can drain all the sample oil in the oil cup without removing the oil cup and rinse the oil cup with sample oil.
2. The instrument uses mid-frequency induction heating, PID temperature control algorithm. This heating method has some advantages, eg, oil cup and heating body non-contact, heating evenly and quickly, also easy to control, thus the temperature strictly controlled within the preset temperature range of error.
3. Internal standard capacitors for SF6 inflatable three-pole impact of capacitors, the capacitor dielectric loss and electrical capacity are not affected by ambient temperature, humidity, etc., to ensure that the instrument is still consistent accuracy after prolonged use.
4.AC Test Power Supply with AC-DC-AC conversion, effectively prevent affecting of the dielectric loss test accuracy for the mains voltage and frequency fluctuations, even the generator generate electricity, the instrument can also run properly.
5. Complete protection. When there is over-voltage, over-current, short-circuit for high-voltage, the instrument can be quickly cut off the voltage and warning. When the temperature sensor fails or is not connected, the instrument will give a warning message.
6.There is a limiting temperature relay amounted in the mid-frequency induction heating furnace, when the temperature exceeds 120 degrees, the relay release, then the heating stop.
7. easy to set the parameters. Temperature setting range 0 ~ 125 ℃, the AC voltage setting range 500 ~ 2200V, the DC voltage setting range 0 ~ 500V.
8.Large-screen LCD display with backlight, clear display. Friendly interface, simply follow the English menu prompt, enter the command, the instrument can be automatically tested. And automatically store and print test results.
9. With real-time clock, test date and time can be saved with the test results, display and print.
10. Empty electrode cup calibration. measuring capacitance and dielectric loss factor of empty electrode cup to determine the status of empty electrode cleaning and assembly of the cup. Calibration data is automatically saved, conducive to calculate the relative permittivity and DC resistivity precisely.
2. The instrument uses mid-frequency induction heating, PID temperature control algorithm. This heating method has some advantages, eg, oil cup and heating body non-contact, heating evenly and quickly, also easy to control, thus the temperature strictly controlled within the preset temperature range of error.
3. Internal standard capacitors for SF6 inflatable three-pole impact of capacitors, the capacitor dielectric loss and electrical capacity are not affected by ambient temperature, humidity, etc., to ensure that the instrument is still consistent accuracy after prolonged use.
4.AC Test Power Supply with AC-DC-AC conversion, effectively prevent affecting of the dielectric loss test accuracy for the mains voltage and frequency fluctuations, even the generator generate electricity, the instrument can also run properly.
5. Complete protection. When there is over-voltage, over-current, short-circuit for high-voltage, the instrument can be quickly cut off the voltage and warning. When the temperature sensor fails or is not connected, the instrument will give a warning message.
6.There is a limiting temperature relay amounted in the mid-frequency induction heating furnace, when the temperature exceeds 120 degrees, the relay release, then the heating stop.
7. easy to set the parameters. Temperature setting range 0 ~ 125 ℃, the AC voltage setting range 500 ~ 2200V, the DC voltage setting range 0 ~ 500V.
8.Large-screen LCD display with backlight, clear display. Friendly interface, simply follow the English menu prompt, enter the command, the instrument can be automatically tested. And automatically store and print test results.
9. With real-time clock, test date and time can be saved with the test results, display and print.
10. Empty electrode cup calibration. measuring capacitance and dielectric loss factor of empty electrode cup to determine the status of empty electrode cleaning and assembly of the cup. Calibration data is automatically saved, conducive to calculate the relative permittivity and DC resistivity precisely.
Power Voltage | AC 220V±10% | ||
Power Frequency | 50Hz/60Hz ±1% | ||
Measurement Range | capacitance | 5pF~200pF | |
relative permittivity | 1.000~30.000 | ||
dielectric dissipation factor | 0.00001~100 | ||
DC Resistivity | 2.5 MΩm~20 TΩm | ||
Measurement Accuracy | capacitance | ±(1%reading+0.5pF) | |
relative permittivity | ±1% reading | ||
dielectric dissipation factor | ±(1% reading +0.0001) | ||
DC Resistivity | ±10% reading | ||
Resolution Ratio | capacitance | 0.01pF | |
relative permittivity | 0.001 | ||
dielectric dissipation factor | 0.00001 | ||
Temperature Range | 0~125℃ | ||
Thermometric Error | ±0.5℃ | ||
AC testing voltage | 500 ~ 2200V adjustable, frequency 50 HZ | ||
DC testing voltage | 0 ~ 500V adjustable | ||
Power Dissipation | 100w | ||
Boundary Dimension | 500mm*360mm*420mm | ||
Weight | 22kg | ||
1.1.Fully Automatic Karl Fischer Water Content Tester
TP-2100
2.Digital Karl Fischer Water Content Tester TP-6A
3.Kinematic Viscosity Tester VST-2000
4.Kinematic Viscosity Tester TPV-8
5.Kinematic Viscosity Tester VST-3000
6.Fully Automatic Oil Acidity Tester (6 cups) ACD-3000I
7.Fully Automatic Surface/Interface Tension Tester IT-800
8.Automatic Surface/Interface Tension Tester (Platinum Plate Method) IT-800P
9.Fully Automatic Open Cup Flash Point Tester TPO-3000
10.Fully Automatic Closed Cup Flash Point Tester TPC-3000
11.Digital Open Cup Flash Point Tester TPO-100
12.Digital Closed Cup Flash Point Tester TPC-100
13.Cloud Point & Pour Point Tester PT-2000
MOQ | 1 Set |
Trade Terms | EXW, FOB, CIF, CFR |
Payment Terms | T/T, L/C |
Port of Loading | Any Port of China |
Packing Method | Internaional Standard Wooden Case |
Transportation Method | By Sea, By Land, By Air, By Express |
Supply Capability | 100 Sets/Month |
* The warranty period is 24 months from commissioning acceptance date on. After the warranty period is over we provide lifelong maintenance and technical service.
* We guarantee the maintenance time no more than 3 working days and response time within 1 hour.
* We build instrument service profile for our clients to record the product service and maintenance conditions.
* After instruments start service, we will pay follow-ups to collect the service conditions.
Chongqing TOP Oil Purifier Co., Ltd
Located at Chongqing city--a southwest electromechanical manufacturing center as well as national municipality, Chongqing TOP is a professional leading manufacturer and supplier of oil purifiers and various related testers. Our company consists of departments respectively for technological development, machinery manufacture, instrument manufacture and quality control etc.
Welcome to visit our website, welcome your inquiry.
Ray Tuo(Mr)
CHONGQING TOP OIL PURIFIER CO.,LTD
Manufacture oil purifiers and supply test equipment.
Add: No. 1, Jianlong N. Rd., Jiulongpo District, Chongqing, China
E: sales7@topoilpurifier.com
Cell: 0086-13340266216 (Whatsapp/Wechat) | Skype: topoilpurifier
Tel: 0086-23-88901306 | Fax: 0086-23-88901306
;
CHONGQING TOP OIL PURIFIER CO.,LTD
Manufacture oil purifiers and supply test equipment.
Add: No. 1, Jianlong N. Rd., Jiulongpo District, Chongqing, China
E: sales7@topoilpurifier.com
Cell: 0086-13340266216 (Whatsapp/Wechat) | Skype: topoilpurifier
Tel: 0086-23-88901306 | Fax: 0086-23-88901306
;
Contact Us
- Chongqing Top Oil Purifier Co., Ltd
Product Categories
New Products
-
Liquid Water Separability Tester Liquid Anti-Emulsification Testing Equipment TP-122
-
Standard Color Wheel Petroleum Products Chroma Meter TP-225
-
TP-508 Mini Lab Lube Oil Ash Analyzer
-
Lab Use Petroleum Products Aniline Point Test Apparatus TP-262A
-
Digital Display Automatic Sulfur In Oil And Fuels Tester TPC-120
-
Digital Display Stainless Steel Foam Characteristics Tester FC-892
-
SH/T 0308 Hydraulic Lubricating Oil Air Release Value Tester TP-0308
-
2021 New Model Anti-Corrosive Oil/Grease Salt Spray Corrosion Tester TP-0081
-
Fully Automatic Digital Total Acid Number Tester TP-6696
-
High Accuracy Online Moisture Dew Point Tester DPME-P
-
OLED Display Digital Transformer Oil Lubricant Oil Quality Testing Equipment
-
Automatic Diesel Copper Corrosion Test Astm d130 TP-113
-
DIL-100Z Automatic Distillate Fuel Oil Oxidation Stability Tester
-
Labs Petroleum products Karl Fischer Coulometric Titrator TPD
-
GB/T 1884-2000 High Accuracy Intelligent Liquid Petroleum Density Tester DST-3000
-
LED Direct Digital Display Potentiometric Titrator TP668
-
Transformer Oil Lubricating Oil Pour And Cloud Point Tester PT-2000
-
ASTM D93 cup method fire point flash point measurement unit TPC-100
-
TPO-100 flash point and fire point of lubricating oil machine
-
Lab automatic flash fire point testing equipment TPC-3000
-
Chongqing Top Oil Purifier Lubricant Flash Point TPO-3000
-
Fast Microcomputer Soil (Fertilizer) Nutrient Tester OK-Q3S
-
LCD English Display Automatic Liquids Interface Tension Tester IT-800
-
2021 Hot Sale ASTMD974 Transformer Oil Diesel Oil Acid Tester ACD-3000I
Popular Searches
- digital tester
- Resistance Tester
- electrical instrument
- test instrument
- lab equipment
- analysis instrument
- laboratory instrument
- Asphalt Mixture Mixer
- launch x431 master
- x431
- Gloss Meter
- Resistance Meter
- digital instrument
- dc load bank
- testing equipment
- testing machine
- battery load bank
- Circuit Tester
- Impact Tester
- lab instrument
- weather station
- gps receiver
- laboratory instruments
- test equipment
- laboratory equipment
- electronic timer
- electronic meter
- electronic instrument
- Electricity Meter
- data collector
Recommended Products
- porcelain tile breaking strength testing machine ceramic wall tile flexural strength test equipment ISO standard tile strength tester for QC labs
- ceramic tile durability and flexural strength tester tile flexural strength test apparatus ceramic floor tile bending tester
- quality control ceramic tile flexural tester production line ceramic tile strength testing machine mechanical properties test equipment
- ceramic tile strength test with three-point bending method laboratory ceramic tile bending strength tester
- ceramic tile elastic modulus measurement modulus of rupture testing equipment for tiles tile bending test load cell machine
- ceramic tile modulus of rupture test ISO standard ceramic tile breaking load testing machine flexural strength measurement device
- ISO 10545-4 flexural and bending strength tester ceramic tile strength testing equipment ISO compliant EN ISO 10545-4 ceramic tile tester
- ceramic tile flexural test equipment ISO 10545-4 mechanical strength tester testing machine
- ceramic tile breaking strength tester elastic modulus testing equipment bending test apparatus
- ISO 10545-4 ceramic tile flexural strength testing machine bending strength tester modulus of rupture testing machine
- ISO 10545-4 ceramic tile flexural strength testing machine bending strength tester modulus of rupture testing machine
- ASTM D1781 peel tester for bonded composite structures High-load peel strength test machine for automotive adhesives
Find Similar Products By Category
- Instruments & Meters > Test Instrument > Test Machine
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Chongqing Top Oil Purifier Co., Ltd
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
sales
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile