Double Stage Dielectric Oil Regeneration/ Transformer Oil Degassing Dehydration Decolorization Plant

Application:
The Oil regeneration system (Series ZYD-I) has been specially designed for on site use to completely regenerate insulating oils in energized or de-energized transformers. The ZYD-I system not only provides regular oil purification such as degassing, drying and particulate removal but also can remove acid, sludge and other soluble oil decay products and discoloration. This is accomplished by the use of high vacuum degasification technology and particulate filters combined with our special brand of earth. After processing, the oil can be reused as new. For special application, the system also can be mounted on a leak proof base, and can be installed and operated on a trailer.

Features:
1. Apart from common vacuum oil purifier's function of dehydration, degassing and particles removing, this machine can regenerate seriously deteriorated oil by removing polarity materials, such as the deep oxides and free carbon in the oil effectively. It can make seriously deteriorated oil reach normal index like anti-oxides, acid-alkali and water-solubility.

 
2. For special application, the operation can be controlled by P.L.C (Programmable Logic Controller).

3. It has unique vacuum dehydration, degassification and regeneration system. It adopts stereo-evaporation 

technology, which has high efficiency in removing water, gas, particles from transformer oil. It can improve oil quality and dielectric strength.

4. It adopts duplex 3D stereo-evaporation, which can eliminate liquid water quickly.

5. UK technology by which the trace water that is show chain, such as dissolved water, can be removed effectively. 

6. It has instinctive impurity removing system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power.

7. Advanced infrared liquid-level automatic control system to accomplish fully automatic control.

8. It is specially applied to vacuum oiling and drying for power transmission equipments.

9. The oil of any grades can be processed either on- or off-load.

10. It has special oil pump design with lower noise.

11. It has Special additives for depolarization, which can recover oil color of aged transformer oil to new. It is equipped with flexible unloading device of short time. It is small with high efficiency. Discoloring under vacuum can save cost of time. The waste impurities will not pollute environment (it can be used to architecture and road pave.)

Advantages:
Compared with single-stage vacuum oil purifier, this machine can dehydrate, degas and remove the impurities more quickly, more completely, and make the oil BDV (Breakdown Voltage) of 75 kV or higher. As the bridge-type vacuum linking system that can purify and also can be an independent vacuum power supply, this machine can treat the electric insulation devices.

Some of the following spare parts for free:

Following spare parts can be equipped(Optional):

ABB Motor

Hydac Filter

Schneider Electrical Parts

Germany Leybold brand Vacuum Pump

German Oil Pump

OIL PURIFIERS

1.ZY series vacuum transformer oil purifier
2.ZYA series vacuum automatic transformer oil purifier
3.ZYB series vacuum transformer oil regeneration purifier
4.ZYD series double-stage vacuum transformer oil purifier
5.ZYD-I series ouble-stage transformer oil regeneration purifier
6.ZYD-M series trailer-mounted transformer oil purifier

7.TY series vacuum turbine oil purifier

8.TYA series vacuum lubricating oil purifier

9.TYB series coalescence-separation oil purifier
10.TYC series vacuum lubricating oil regeneration purifier
11.CYA series centrifugal oil purifier
12.TPR series waste engine oil recycling system
13.PL series plate and frame oil filter press
14.JL series portable oil purifier
15.BZ series transformer oil regeneration device

TRANSFORMER OIL TESTERS

1.Fully Automatic Karl Fischer Water Content Tester TP-2100
2.Kinematic Viscosity Tester VST-2000
3. Fully Automatic Oil Acidity Tester (6 cups) ACD-3000I
4. Fully Automatic Surface/Interface Tension Tester IT-800
5. Fully Automatic Open Cup Flash Point Tester TPO-3000
6.Fully Automatic Closed Cup Flash Point Tester TPC-3000
7.Cloud Point & Pour Point Tester PT-2000

8.Petroleum Products Density Tester DST-3000
9.Petroleum And Synthetic Liquid Anti-Emulsification Tester TP-122

10.Petroleum Products Chroma Tester Model TP-225
11. Automatic Petroleum Products Carbon Residue Tester (Micromethod) CS-062
12. Transformer Oil Insulating Oil Breakdown Voltage BDV Dielectric Strength Tester IIJ-II
13. Insulating Oil Dielectric Loss/ Resistivity/ Power Factor Tester TP-6100A
14. Transformer Oil Dissolved Gas DGA Analyzer/ Gas Chromatography GC2010MD

Packaged in international standard export wooden case

Safe and Timely Transportation

*Standard export wooden case with high quality cushioning material ensures that the customers get the item in good condition.
*Carefully check every packing detail before delivery to avoid any troubles during the transportation.
*Appointed logistics company could be used according to customers demands.
* Do our best to make sure customers can get their goods in time.

What is the mini order quantity?
MOQ: generally 1 unit/piece/set

What payment methods are supported?
Payment method: By T/T, L/C, Alibaba Trade Assurance etc.

Payment terms: Generally, T/T 40% advanced, the balance paid by T/T when the machine is ready; or 100% irrevocable L/C at sight.

What are the available delivery methods?
Our port location: Chongqing, Shanghai or other main port of China
Delivering to: Worldwide
Delivering method: by sea, by air, by truck, by express, combined transportation

How long is the product date of delivery probably?
Delivery date differs with product type, order quantity, special requirement etc. Usually our big machine delivery date is around 10 ~ 20 days; test equipment or analyzer delivery date is around 5~10 days. Some products have stock. Contact us anytime to get more information.

How long is the warranty period?
We warrants the plant supplied under agreed specification against defects in material and workmanship under normal use and service for a period of 2 years after start up of the system.

How is the technical services on the product?
Engineer available to service machinery overseas. If you have any technical question, you are welcome to contact us any time. We will response promptly and answer to your satisfaction. If required and necessary, we can send our engineer to your place to provide technical support.