Truck Mounted Mobile Transformer Oil Regeneration Equipment design with numbers of columns housing the regeneration sorbent

Use of the equipment:
The Oil regeneration system (Series ZYD-I) has been specially designed for on site use to completely regenerate insulating oils in
energized or de-energized transformers. The ZYD-I system provides regular oil purification such as degassing, drying and
particulate removal but also can remove acidity, sludge, other soluble oil decay products and discoloration. This is accomplished
by the use of high vacuum degasification technology and particulate filters combined with our special brand of earth. After
treating, the oil can be reused as new. For special application, the system also can be mounted on a leak proof base and can be
installed and operated on a trailer.

Regular servicing of transformers with our equipment can substantially improve their lifetime and performance and on top helps to
save money.
The new line of . oil regeneration plants Type ZYD-I”, with variable flow capacity, is designed for most economical conditioning
and drying of insulating oils.The plants are designed for the following

Features:
1.The plant is delivered ready for operation.
2.Degassing, dehydration and filtering process if various kind of insulation oils in electrical transformers and circuit breakers
through put in one or several passes
3. There are two vacuum pumps for plant ZYD-I (one is the vacuum pump, other one is the booster roots pump), which can improve
the vacuum value highly. Making sure the water-content of the treated oil is less than 3 PPM.
4. All oil treatment plants, type ZYD-I are equipped with an automatic Anti-Foam Control System.
5. The plant is equipped with built-in control and safety devices, which provides for a maximum operating security.
6. Minimised power consumption through optimised degassing (excellent efficiency factor).
7. Standardized filter housing for 5 micron, 20 micron and 80 micron filter cartridges.
8. Automatic supervision of the degree of contamination of the fine filter cartridges
9. ZYD-I can evacuate the vacuum for the electric equipment separately, such as the transformer. Also it can be used to dry the
electric equipment and input the oil into the electric equipment under the vacuum state.
10. The machine adopts the double-infrared liquid automatic controller, pressure automatic-protector which

can make sure the machine works online for 150 hours continuously without person. So it is a reliable and
high automatically machine.
11. Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank
pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.
12. Functions of live line work on-site, vacuum drying and vacuum oiling.
13. Operational can be P.L.C (Programmable Logic Controller).
14. On-line water content measuring device
15. Regeneration system with special brand of earth can remove acidity, sludge, other soluble oil decay products and discoloration

Expectations on an effective oil plant for treatment of insulating oil:
Low moisture content at plant outlet.
Low gas/air content at plant outlet.
Elimination of residual gas from the insulation.
Drying of transformer insulation.
Easy and fail safe operation.
On-line measuring and recording of process parameters.
Flexibility in application (various oil types and oil volumes)

Some of the following spare parts for free:

The following international famous brand spare parts can be equipped according to your needs:

ABB Motor

 Hydac Filter

German Leybold Vacuum Pump

Schneider Electrical Parts

ZY Series Single Stage Vacuum Transformer Oil Purifier

TRANSFORMER OIL TESTERS

1.Fully Automatic Karl Fischer Water Content Tester TP-2100
2.Kinematic Viscosity Tester VST-2000

3. Fully Automatic Oil Acidity Tester (6 cups) ACD-3000I
4. Fully Automatic Surface/Interface Tension Tester IT-800
5. Fully Automatic Open Cup Flash Point Tester TPO-3000
6.Fully Automatic Closed Cup Flash Point Tester TPC-3000
7.Cloud Point & Pour Point Tester PT-2000

8.Petroleum Products Density Tester DST-3000

10.Petroleum And Synthetic Liquid Anti-Emulsification Tester TP-122
11.Petroleum Products Chroma Tester Model TP-225
12. Automatic Petroleum Products Carbon Residue Tester (Micromethod) CS-062
13. Transformer Oil Insulating Oil Breakdown Voltage BDV Dielectric Strength Tester IIJ-II
14. Insulating Oil Dielectric Loss/ Resistivity/ Power Factor Tester TP-6100A
15. Transformer Oil Dissolved Gas DGA Analyzer/ Gas Chromatography GC2010MD

Packaged in standard export wooden case