Fully Automatic Control diesel Oil Decoloration and Purifier Equipment

Technical Parameter

Oil decolorization machine TYR Series

PLC fully automatic control system

Decoloring test on red diesel, turmeric oil, cooking oil.

Packaged in international standard wooden case

Working Principle:

In the working process, the polluting oils enter the heater from the inlet under the action of atmospheric vacuum sucking. Then the heated oil flows into the pre-filter device to remove large grains. After that, the oil enter the vacuum separator, flowing past the special divergence apparatus which can make the oil has a huge surface area in the unit volume and let it expose in an low relative humidity environment to cleaning water, air and other gases from the oil. The mixed gases which consist of evaporated water and gases will turn to liquids after condensating through the water tank and cooler. Then the liquids flows into the water receiver and the rest air will be vacuum evacuated from liquids. The oil without water will be transported into the fine filter by the oil drain pump to remove suspending impurities and get the cleaning oil. A cleansing process needs several times of circulating to completely separate the water out and it depends on how much of the moisture content in the oil. The last step, the purified oil will be processed by the decoloring system and change to the new oil. 

What is the mini order quantity?
MOQ: generally 1 unit/piece/set

What payment methods are supported?
Payment method: By T/T, L/C, Alibaba Trade Assurance etc.
Payment terms: Generally, T/T 40% advanced, the balance paid by T/T when the machine is ready; or 100% irrevocable L/C at sight.

What are the available delivery methods?
Our port location: Chongqing, Shanghai or other main port of China
Delivering to: Worldwide
Delivering method: by sea, by air, by truck, by express, combined transportation

How long is the product date of delivery probably?
Delivery date differs with product type, order quantity, special requirement etc. Usually our big machine delivery date is around 10 ~ 20 days; test equipment or analyzer delivery date is around 5~10 days. Some products have stock, contact us anytime to get more information.

How long is the warranty period?
We warrants the plant supplied under agreed specification against defects in material and workmanship under normal use and service for a period of 2 years after start up of the system.

How is the technical services on the product?
Engineer available to service machinery overseas. If you have any technical question, you are welcome to contact us any time. We will response promptly and answer to your satisfaction. If required and necessary, we can send our engineer to your place to provide technical support.