Home > Products > Temp Humidity Chamber > FCC detection meat curing dry aging chamber Walk-in Temperature Humidity Climatic Stability Test Chamber
FCC detection meat curing dry aging chamber Walk-in Temperature Humidity Climatic Stability Test Chamber
Negotiable
1 (Min. Order)
- T/T Credit Card
You May Like
-
FCC Detection Walk-in temperature humidity shipping container type mobile lab climatic chamber
-
Lab adjustable high low rapid temperature and humidity heat climatic test chamber desktop for lab use
-
Environment Constant Cooling Temp Humidity Walk In Environmental Chamber
-
Constant Humidity Temperature Stability Chamber Test Apparatus/humidity room/cliamte chamber
-
Temperature Humidity Chamber With Import Data and HS Code
-
Easy to control halt and hass chamber with cheap price
Product Description
Product Description
Product Usage
The simulated products are tested under the combination of temperature and humidity in the climatic environment (high and low temperature operation & storage, temperature cycle, high temperature and high humidity, low temperature and low humidity, condensation test, etc.) to check whether the adaptability and characteristics of the product itself change.
Must meet the requirements of international standards (IEC, JIS, GB, MIL...) to achieve international measurement procedure consistency (including test procedures, conditions, methods)
Test limit
This test equipment is suitable for:
Electrical, electronic products, components, components and materials are stored in high and low temperature environments
Adaptability tests for storage, transportation and use.
This test equipment is prohibited:
Testing or storage of flammable, explosive, volatile materials
Testing or storage of corrosive substance samples
Testing or storage of biological samples
Testing or storage of samples of strong electromagnetic emission sources
Volume, size and weight
| Nominal internal volume | 18000L |
| Inner box size | W2400 x D2400x H3000mm |
| Dimensions (approx.) | W3800 x D2900 x H3500mm |
| Weight (about) | 1800KG |
| Performance | |
| Test environmental conditions | The ambient temperature is +25 ° C, the relative humidity is ≤ 85%, and there is no sample in the test chamber. |
| testing method | GB/T 5170.2-1996 temperature test equipment |
| GB/T 5170.5-1996 Damp heat test equipment (damp heat type only) | |
| Temperature range | -20°C→+150°C |
| Temperature fluctuation | ±0.5°C |
| Temperature distribution accuracy | ±2.0°C |
| Humidity range | 20% to 98% R.H (damp heat only) |
| Humidity fluctuation | ±5% R.H. (damp heat only) |
| Humidity distribution accuracy | ±5.0%. (damp heat only) |
| Load situation | The test space is no more than three-quarters of the total space and there is no heat. |
Structure1.Thermal insulation structure
Outer wall material: high quality stainless steel 304 / cold rolled steel plate painting
Inner wall material: high quality stainless steel 304
Box insulation material: flame retardant fireproof rigid polyurethane foam
Door insulation material: flame retardant fireproof rigid polyurethane foam.
2.Air conditioning channel
Centrifugal fan, return air mode: air blow on equipment, return air
Heater, evaporator, water supply and drain, temperature sensor.
Centrifugal fan, return air mode: air blow on equipment, return air
Heater, evaporator, water supply and drain, temperature sensor.
3.Test box standard configuration
Window 250x320x40mm 3-layer vacuum layer
Explosive handle
Door hinge: SUS #304
Box light PL light 11W
Lead hole: φ50mm 1
Window 250x320x40mm 3-layer vacuum layer
Explosive handle
Door hinge: SUS #304
Box light PL light 11W
Lead hole: φ50mm 1
4.Door
Single door, left open, handle on the right hand side. With observation window 250*320 mm, lighting,
Window frame/door frame anti-condensation electric heating device
5. Control panel Controller display, over temperature protection setter
6. Mechanical room Refrigeration unit, water tray, drain hole
7. Distribution control cabinet, distribution board, exhaust fan
8. Heater Heating system: finned heat pipe type stainless steel electric heater heating air circulation mode
9. Humidifier Boiler type humidification system, circulating through the air duct system.
10. Power cable hole and drain hole are located on the back of the cabinet
Single door, left open, handle on the right hand side. With observation window 250*320 mm, lighting,
Window frame/door frame anti-condensation electric heating device
5. Control panel Controller display, over temperature protection setter
6. Mechanical room Refrigeration unit, water tray, drain hole
7. Distribution control cabinet, distribution board, exhaust fan
8. Heater Heating system: finned heat pipe type stainless steel electric heater heating air circulation mode
9. Humidifier Boiler type humidification system, circulating through the air duct system.
10. Power cable hole and drain hole are located on the back of the cabinet
Cooling System
1.Condenser Water-cooled shell tube heat exchanger.
2. Expansion system Refrigeration system (capillary) for capacity control.
3. Evaporation condenser Stainless steel brazed plate heat exchanger.
4. Refrigerator control mode The controller of the control system automatically adjusts the operating conditions of the refrigerator according to the test conditions.
Evaporate the pressure regulating valve.
Compressor return air cooling circuit.
5. Temperature and humidity controller
It adopts the micro-computer color LCD display touch screen, Chinese wide angle of view, high contrast function temperature and humidity can be programmed at the same time, with 100 groups of programs 1000 segments of memory, each segment 530Hour59Min, can be arbitrarily divided Settings, and With multiple sets of PID control functions.
6. Controller Specifications
Accuracy: temperature ±0.1 °C+1 digit, humidity ±1% R.H+1digit
Resolution: temperature ± 0.01 ° C, humidity ± 0.1% R. H.
Temperature slope: 0.1 ~ 9.9 can be set.
With upper and lower limit standby and alarm function.
Temperature and humidity input signal dry and wet ball PT100x2.
7 sets of P.I.D control parameter settings, P.I.D automatic calculation.
Dry and wet balls are automatically corrected.
1.Condenser Water-cooled shell tube heat exchanger.
2. Expansion system Refrigeration system (capillary) for capacity control.
3. Evaporation condenser Stainless steel brazed plate heat exchanger.
4. Refrigerator control mode The controller of the control system automatically adjusts the operating conditions of the refrigerator according to the test conditions.
Evaporate the pressure regulating valve.
Compressor return air cooling circuit.
5. Temperature and humidity controller
It adopts the micro-computer color LCD display touch screen, Chinese wide angle of view, high contrast function temperature and humidity can be programmed at the same time, with 100 groups of programs 1000 segments of memory, each segment 530Hour59Min, can be arbitrarily divided Settings, and With multiple sets of PID control functions.
6. Controller Specifications
Accuracy: temperature ±0.1 °C+1 digit, humidity ±1% R.H+1digit
Resolution: temperature ± 0.01 ° C, humidity ± 0.1% R. H.
Temperature slope: 0.1 ~ 9.9 can be set.
With upper and lower limit standby and alarm function.
Temperature and humidity input signal dry and wet ball PT100x2.
7 sets of P.I.D control parameter settings, P.I.D automatic calculation.
Dry and wet balls are automatically corrected.
Safety device
Cooling System
Compressor overheating
Compressor overcurrent
Compressor overpressure
Condensing fan overheating
Compressor oil pressure protection
Cooling System
Compressor overheating
Compressor overcurrent
Compressor overpressure
Condensing fan overheating
Compressor oil pressure protection
Installation site
The floor is flat and well ventilated
No strong vibration around the device
No strong electromagnetic field around the device
No flammable, explosive, corrosive substances and dust around the equipment
Appropriate use and maintenance space is left around the equipment, as shown below:
A: not less than 10cm
B: not less than 60cm
C: not less than 60cm
D: not less than 120cm
The floor is flat and well ventilated
No strong vibration around the device
No strong electromagnetic field around the device
No flammable, explosive, corrosive substances and dust around the equipment
Appropriate use and maintenance space is left around the equipment, as shown below:
A: not less than 10cm
B: not less than 60cm
C: not less than 60cm
D: not less than 120cm
Tap water
(only for wet heat equipment with water purifier)
Flow rate ≥200kg/h,
The pressure is 0.1 MPa to 0.25 MPa.
Tap water meets the sanitary standards for drinking water in GB 5749-1985.
Note: DN15 male connector for pure water machine.
(only for wet heat equipment with water purifier)
Flow rate ≥200kg/h,
The pressure is 0.1 MPa to 0.25 MPa.
Tap water meets the sanitary standards for drinking water in GB 5749-1985.
Note: DN15 male connector for pure water machine.
Packaging & Shipping
Company Information
Contact Us
- Dongguan Hongjin Test Instrument Co., Ltd.
Product Categories
New Products
-
Multifunctional walk in high-low temperature test chamber with good guarantee
-
150L Protemperature And Test Box Programmable Climatic Climate Instrument Equipment Simulation Humidity Environmental Chamber
-
Walk in cooling fermentation chamber malaysia
-
FCC detection High Temperature Humidity Controlled Oven/Walk In Stability Chamber
-
50l 70l small climatic chamber
-
High-low constant environmental temperature and humidity test climatic chamber price
-
Economical Climatic Thermal Temperature and Humidity Chamber Electronic Cooling 1.0℃/min or Custom Made Touch Control 12 Months
-
80l environmental programmabler temperature humidity climatic aging test chamber
-
Laboratory equipment constant temperature and humidity stability chambers price
-
Programable 80l environmental climatic chamber temperature thermal heat shock test chambers price
-
Precision thermo testing machine for semiconductor,chips,microelectronics,integrated circuitstester
-
80L Thermal shock dunk test chamber for coating/pcb/refractory/solder joints
-
IEC standard temperature cycle thermal shock test machine reliability
-
ISO 2819 40L temperature thermal shock test chamber for glass containers in india
-
Programable lab test equipment 40L liquid to liquid thermal shock chamber
-
Industrial price environmental cooling and heating shock thermal type air testing chamber
-
Two three zones thermotron temperature thermal shock test standard procedure chamber price
-
Environmental climatic liquid to liquid heat thermal air shock test chamber for semiconductor
-
Environmental climatic 3 zone cool and heating thermal shock chamber for semiconductor
-
Automatic battery pack 2 zone type air to air cold hot climatic thermal shock test chamber
-
thermal tester heat resistance high and low temperature shock test chamber
-
temperature humidity vibration programmable thermal shock chamber Hongjin tester
-
thermal stability test chambers Hot and Cold Impact Testing Machine for wholesales
-
Climatic Thermal Cold Heat Shock Constant Humidity Cooling Test Chamber
Popular Searches
- digital tester
- resistance tester
- electrical instrument
- test instrument
- lab equipment
- analysis instrument
- laboratory instrument
- asphalt mixture mixer
- launch x431 master
- x431
- gloss meter
- resistance meter
- digital instrument
- dc load bank
- testing equipment
- testing machine
- battery load bank
- circuit tester
- impact tester
- lab instrument
- weather station
- gps receiver
- test equipment
- laboratory equipment
- electronic timer
- electronic meter
- electronic instrument
- electricity meter
- data collector
- experiment apparatu
Recommended Products
- Automatic sampler Introduction of Bamtone/S275 products
- UL94 Horizontal Vertical Combustion Chamber | Flammability Test Equipment for Cable and Plastic
- Horizontal Vertical Burning Tester | UL94 Fire Resistance Test Equipment for Polymers
- UL94 HB V-0 Horizontal Vertical Flame Tester | Flammability Resistance Testing Equipment
- Horizontal Vertical Flammability Testing Machine | UL 94 Standard Combustion Test Chamber
- UL94 Horizontal Vertical Burning Test Apparatus | Plastic Material Flame Spread Tester
- Horizontal Vertical Combustion Tester | UL94 Flammability Testing Apparatus for Insulating Materials
- UL94 Horizontal Vertical Flame Chamber | Fire Resistance Tester for Plastic and Rubber Materials
- Horizontal Vertical Burning Test Machine | Polymer Flame Resistance Testing Equipment
- Horizontal Vertical Flammability Tester | UL 94 HB V-0 V-1 V-2 Combustion Test Chamber
- UL94 Horizontal Vertical Burning Tester | Flammability Test Equipment for Plastics
- Electromechanical Computerized Universal Tensile Strength Testing Machine with Large Deformation Extensometer
Find Similar Products By Category
- Instruments & Meters > Test Instrument > Test Machine
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Dongguan Hongjin Test Instrument Co., Ltd.
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
sales
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile