Home > Products > Temp Humidity Chamber > Thermal Cycle Climate Test Equipment for Lithium Battery
Thermal Cycle Climate Test Equipment for Lithium Battery
Negotiable
1 (Min. Order)
- T/T Credit Card
You May Like
-
Laboratory Double Layer Climatic Constant Temperature Humidity Control Test Chamber
-
R449A refrigerant Climate Control Rapid Ramp Rate Temp Testing Equipment Thermal Cycling Chamber
-
Environmental Programmable High Temp Temperature Humidity Test chamber
-
Laboratory Low Temperature Seed Germination Climate Test Chamber
-
Laboratory instruments seed germination chamber/ pcb equipment/auto parts test machine
-
Mobile Laboratory Machine Hot And Cold Control Impact Testing Equipment Thermal Shock Test Chamber
Product Description
Product Description
Temperature chamber application
The simulated products are tested under the combination of temperature and humidity in the climatic environment (high and low temperature operation & storage, temperature cycle, high temperature and high humidity, low temperature and low humidity, condensation test, etc.) to check whether the adaptability and characteristics of the product itself change.
Must meet the requirements of international standards (IEC, JIS, GB, MIL...) to achieve international measurement procedure consistency (including test procedures, conditions, methods)
Test limit
This test equipment is suitable for:
Electrical, electronic products, components, components and materials are stored in high and low temperature environments
Adaptability tests for storage, transportation and use.
This test equipment is prohibited:
Testing or storage of easy fire, explosive, volatile materials
Testing or storage of corrosive substance samples
Testing or storage of biological samples
Testing or storage of samples of strong electromagnetic emission sources
Volume, size and weight
| Size(cm) | HJ-6 | HJ-8 | HJ-12 | HJ-16 | HJ-20 | HJ-24 | HJ-28 |
| Inner box (D*H*W) | 200*200*150 | 200*200*200 | 200*200*300 | 200*200*400 | 200*200*500 | 200*200*600 | 200*200*700 |
| Outer box (D*H*W) | 220*250*270 | 220*250*320 | 220*250*420 | 220*250*520 | 220*250*620 | 220*250*720 | 220*250*720 |
| Performance | |
| Test environmental conditions | The ambient temperature is +25 ° C, the relative humidity is ≤ 85%, and there is no sample in the test chamber. |
| High temperature range | 85°C(150°C) |
| Low temperature range | A: +25 °C B:0°C C:-20°C :-40°C E:-60°C F:-70°C) |
| Humidity range | 30-80%(Customize 10% - 98%) |
| Temperature fluctuation | ±0.5°C |
| Temperature distribution accuracy | ±2.0°C |
| Humidity fluctuation | ±5% R.H. (damp heat only) |
| Humidity distribution accuracy | ±5.0%. (damp heat only) |
| Load situation | The test space is no more than three-quarters of the total space and there is no heat. |
| testing method | GB/T 5170.2-1996 temperature test equipment |
| GB/T 5170.5-1996 Damp heat test equipment (damp heat type only) |
Structure1.Thermal insulation structure
Outer wall material: high quality stainless steel 304 / cold rolled steel plate painting
Inner wall material: high quality stainless steel 304
Box insulation material: flame retardant fireproof rigid polyurethane foam
Door insulation material: flame retardant fireproof rigid polyurethane foam.
2.Air conditioning channel
Centrifugal fan, return air mode: air blow on equipment, return air
Heater, evaporator, water supply and drain, temperature sensor.
Centrifugal fan, return air mode: air blow on equipment, return air
Heater, evaporator, water supply and drain, temperature sensor.
3.Test box standard configuration
Window 250x320x40mm 3-layer vacuum layer
Explosive handle
Door hinge: SUS #304
Box light PL light 11W
Lead hole: φ50mm 1
Window 250x320x40mm 3-layer vacuum layer
Explosive handle
Door hinge: SUS #304
Box light PL light 11W
Lead hole: φ50mm 1
4.Door
Single door, left open, handle on the right hand side. With observation window 250*320 mm, lighting,
Window frame/door frame anti-condensation electric heating device
5. Control panel Controller display, over temperature protection setter
6. Mechanical room Refrigeration unit, water tray, drain hole
7. Distribution control cabinet, distribution board, exhaust fan
8. Heater Heating system: finned heat pipe type stainless steel electric heater heating air circulation mode
9. Humidifier Boiler type humidification system, circulating through the air duct system.
10. Power cable hole and drain hole are located on the back of the cabinet
Single door, left open, handle on the right hand side. With observation window 250*320 mm, lighting,
Window frame/door frame anti-condensation electric heating device
5. Control panel Controller display, over temperature protection setter
6. Mechanical room Refrigeration unit, water tray, drain hole
7. Distribution control cabinet, distribution board, exhaust fan
8. Heater Heating system: finned heat pipe type stainless steel electric heater heating air circulation mode
9. Humidifier Boiler type humidification system, circulating through the air duct system.
10. Power cable hole and drain hole are located on the back of the cabinet
Cooling System
1.Condenser Water-cooled shell tube heat exchanger.
2. Expansion system Refrigeration system (capillary) for capacity control.
3. Evaporation condenser Stainless steel brazed plate heat exchanger.
4. Refrigerator control mode The controller of the control system automatically adjusts the operating conditions of the refrigerator according to the test conditions.
Evaporate the pressure regulating valve.
Compressor return air cooling circuit.
5. Temperature and humidity controller
It adopts the micro-computer color LCD display touch screen, Chinese wide angle of view, high contrast function temperature and humidity can be programmed at the same time, with 100 groups of programs 1000 segments of memory, each segment 530Hour59Min, can be arbitrarily divided Settings, and With multiple sets of PID control functions.
6. Controller Specifications
Accuracy: temperature ±0.1 °C+1 digit, humidity ±1% R.H+1digit
Resolution: temperature ± 0.01 ° C, humidity ± 0.1% R. H.
Temperature slope: 0.1 ~ 9.9 can be set.
With upper and lower limit standby and alarm function.
Temperature and humidity input signal dry and wet ball PT100x2.
7 sets of P.I.D control parameter settings, P.I.D automatic calculation.
Dry and wet balls are automatically corrected.
1.Condenser Water-cooled shell tube heat exchanger.
2. Expansion system Refrigeration system (capillary) for capacity control.
3. Evaporation condenser Stainless steel brazed plate heat exchanger.
4. Refrigerator control mode The controller of the control system automatically adjusts the operating conditions of the refrigerator according to the test conditions.
Evaporate the pressure regulating valve.
Compressor return air cooling circuit.
5. Temperature and humidity controller
It adopts the micro-computer color LCD display touch screen, Chinese wide angle of view, high contrast function temperature and humidity can be programmed at the same time, with 100 groups of programs 1000 segments of memory, each segment 530Hour59Min, can be arbitrarily divided Settings, and With multiple sets of PID control functions.
6. Controller Specifications
Accuracy: temperature ±0.1 °C+1 digit, humidity ±1% R.H+1digit
Resolution: temperature ± 0.01 ° C, humidity ± 0.1% R. H.
Temperature slope: 0.1 ~ 9.9 can be set.
With upper and lower limit standby and alarm function.
Temperature and humidity input signal dry and wet ball PT100x2.
7 sets of P.I.D control parameter settings, P.I.D automatic calculation.
Dry and wet balls are automatically corrected.
Safety device
Cooling System
Compressor overheating
Compressor overcurrent
Compressor overpressure
Condensing fan overheating
Compressor oil pressure protection
Cooling System
Compressor overheating
Compressor overcurrent
Compressor overpressure
Condensing fan overheating
Compressor oil pressure protection
Installation site
The floor is flat and well ventilated
No strong vibration around the device
No strong electromagnetic field around the device
No easy fire, explosive, corrosive substances and dust around the equipment
Appropriate use and maintenance space is left around the equipment, as shown below:
A: not less than 10cm
B: not less than 60cm
C: not less than 60cm
D: not less than 120cm
The floor is flat and well ventilated
No strong vibration around the device
No strong electromagnetic field around the device
No easy fire, explosive, corrosive substances and dust around the equipment
Appropriate use and maintenance space is left around the equipment, as shown below:
A: not less than 10cm
B: not less than 60cm
C: not less than 60cm
D: not less than 120cm
Tap water
(only for wet heat equipment with water purifier)
Flow rate ≥200kg/h,
The pressure is 0.1 MPa to 0.25 MPa.
Tap water meets the sanitary standards for drinking water in GB 5749-1985.
Note: DN15 male connector for pure water machine.
(only for wet heat equipment with water purifier)
Flow rate ≥200kg/h,
The pressure is 0.1 MPa to 0.25 MPa.
Tap water meets the sanitary standards for drinking water in GB 5749-1985.
Note: DN15 male connector for pure water machine.
Packaging & Shipping
Company Information
Contact Us
- Dongguan Hongjin Test Instrument Co., Ltd.
Product Categories
New Products
-
Climatic Simulate Solar Panel Weather Resistance UV Accelerate Aging Test Equipment Machine Instrument Chamber / Tester
-
VOC Emission Environmental Climate Chamber FD-1V
-
Lab linear or no-linear rapid rate high low temperature cycling fast change test chamber
-
radiator vibration test machine
-
15C/min thermal air fast temperature portable cycling shock chamber laboratory with window
-
Constant Temperature And temp Humidity Test Chamber
-
80l 225l mushroom 3-layer temperature and humidity test chamber gauze
-
50 Litre Small min -20C+ 80C environmental temperature humidity test chamber
-
YH-40B Standard Constant Temperature Humidity control Curing Cabinet box in China
-
Constant Temperature Humidity Test box / temperature and humidity control cabinet
-
High Low Constant Temperature Programmable Alternating Humidity and Heat Test Box
-
Electronic Power Laboratory Industrial Test instruments Walk in testing chamber for car computer phone camera
-
Lab chamber manufacturer walk in chambers with temperature humidity control
-
Industrial -20 to +80C temperature humidity control test laboratory walk in environmental chamber
-
New Benchtop Humidity Control Environmental Chamber Temperature Climatic Chamber Stainless Steel Electronic TEMI 950 HJ-7121
-
big size assembled Freezer Environmental Temp Humidity room
-
Electronic Environmental Chamber Walk In Accelerated Aging Climate Room Price Factory For Temperature Humidity Test
-
Electronic measuring instruments temperature humidity test instrument price
-
Factory Price Custom Desktop Floor Standing Environmental Temperature Humidity Stability Testing Equipment
-
New Design laboratory programmable -60 degree constant temperature humidity stability climate test chamber
-
Custom Guangdong supplier temperature and humidity test industrial
-
Electronic Products Machinery Testing Equipment Environmental Temperature Humidity Calibrator Damp Heat Chamber
-
Programmable new design HALT high low temperature cycling chamber with or without vibration test
-
Factory programmable 150 L constant temperature humidity control pharma stability testing chamber
Popular Searches
- digital tester
- Resistance Tester
- electrical instrument
- test instrument
- lab equipment
- analysis instrument
- laboratory instrument
- Asphalt Mixture Mixer
- launch x431 master
- x431
- Gloss Meter
- Resistance Meter
- digital instrument
- dc load bank
- testing equipment
- testing machine
- battery load bank
- Circuit Tester
- Impact Tester
- lab instrument
- weather station
- gps receiver
- laboratory instruments
- test equipment
- laboratory equipment
- electronic timer
- electronic meter
- electronic instrument
- Electricity Meter
- data collector
Recommended Products
- porcelain tile breaking strength testing machine ceramic wall tile flexural strength test equipment ISO standard tile strength tester for QC labs
- ceramic tile durability and flexural strength tester tile flexural strength test apparatus ceramic floor tile bending tester
- quality control ceramic tile flexural tester production line ceramic tile strength testing machine mechanical properties test equipment
- ceramic tile strength test with three-point bending method laboratory ceramic tile bending strength tester
- ceramic tile elastic modulus measurement modulus of rupture testing equipment for tiles tile bending test load cell machine
- ceramic tile modulus of rupture test ISO standard ceramic tile breaking load testing machine flexural strength measurement device
- ISO 10545-4 flexural and bending strength tester ceramic tile strength testing equipment ISO compliant EN ISO 10545-4 ceramic tile tester
- ceramic tile flexural test equipment ISO 10545-4 mechanical strength tester testing machine
- ceramic tile breaking strength tester elastic modulus testing equipment bending test apparatus
- ISO 10545-4 ceramic tile flexural strength testing machine bending strength tester modulus of rupture testing machine
- ISO 10545-4 ceramic tile flexural strength testing machine bending strength tester modulus of rupture testing machine
- ASTM D1781 peel tester for bonded composite structures High-load peel strength test machine for automotive adhesives
Find Similar Products By Category
- Instruments & Meters > Test Instrument > Test Machine
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Dongguan Hongjin Test Instrument Co., Ltd.
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
sales
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile