Pvc Pipe Fitting Cross Joint , End Cap , Saddle Clamp , Eccentric Reducer , 90 Degree Elbow

pvc pipe fitting cross joint , end cap , saddle clamp , eccentric reducer , 90 degree elbow

TEST PPR Clamp

Normal Information 

Permissible Working Pressure And Longevity

Detail Information 

1. High Temperature Resistance:

The maximum sustained working temperature is up to 70 Degrees Celsius, the maximum transient temperature is up to 95 Degrees Celsius.

2. Heat Insulation and Saving Energy:

Low thermal conductivity which is only 1/1500 of brass pipe, and 1/250 of steel pipe.
3. Non-Toxic:

No heavy metal additives would not be covered with dirty or contaminated by bacterium. 

Healthy, bacteriological neutral, conforming to drinking water standards.
4. Corrosion Resistant:

Resist chemical matters or electron chemical corrosion.
5. Lower Installation Costs:

Light weight and good hot-melt performance can reduce installation costs by as much as 50% over metal piping system.
6. Higher Flow Capacity:

Smooth inner walls reduce pressure loss and increase flow speed.
7. Long Life:

More than 50 years under normal conditions.

8. Sound insulation:

Reduced by 40% compared to galvanized steel pipes.

9. Excellent Design: 

Light colors and excellent design ensure suitability for both exposed and hidden installation.

Q1:Are You a Factory or Trading Company? 

A: Established in 1984, HEBEI METAL TRADING  CO.,LTD  is a comprehensive group enterprise which have our own factory ,exporting branch and overseas branch

Q2:How Does Your Factory Do Regarding Quality Control? 

A: Quality Assurance at HEBEI METAL TRADING  CO.,LTD starts with understanding the Customers Requirement and continues till the customer is completely satisfied with the delivery of products and services. Quality Control procedures are well defined and thoroughly implemented.

Q3:Can I Get Some Samples? 

A: Yes,free samples are available for you. 

Q4:  After Sales Service:

A: Quality are promised. We have a dedicated after-sales department to be responsible for all subsequent work after delivery.

Q5: How To Order?

A:1.To specify british,or American or German threads.

    2.To specify galvanized or black

    3.To specify plain or banded or beaded

    4.To specify figure number,size and quantity in pieces