12 in 1 FTTH Assembly herramientas ftth Optical Fiber Tool Kits FC-6S Cable Stripper Optical Power Meter VFL Kevlar Cutter

                  $24~28usd/set                     $26~30usd/set                    $30~34usd/set

               $80~89usd/set                     $35~55usd/set                     $9~9.8usd/set

10 in 1 FTTH Assembly Optical Fiber Tool Kits FC-6S Cable Stripper Optical Power Meter VFL Kevlar Cutter

 FTTH Tools Kit

Description: FC-6S

Model: FC-6S

Applicable fibers: Singlemode or Multimode Use

Fiber Diameter: 125um

Coating Diameter: 250um ~ 900um

Typical Cleave Angle: 0.5 Degrees

Cleave Length: 9 - 16mm (Single Fiber - 0.25mm Coating)/10 - 16mm (Single Fiber - 0.9mm Coating)

Blade Life Time: 36,000 cleaves (3,000 per blade position)

Cleaver Dimensions: 63 x 65 x 63mm

Weight 350g

Description: CFS-2

1.0mm diameter stripping hole at the tip of tool that can be used to strip the fiber jacket 

140 µm diameter hole and V-opening in blade allows removal of 250 micron buffer coating from 125 micron fiber 

All stripping surfaces are manufactured to precise tolerances to assure clean, smooth strips 

Lock to hold tool closed when it is not in use 

Will not scratch or nick glass fiber 

Pre-set at the factory-no adjustments needed 

Comfort grip, ergonomic handles

Description: FTTH Drop Cable Stripper

- Tool for FTTH flat drop optical cable 

- Universal Stripper for 3.1x2.0mm FTTH drop cables with steel wire or FRP strength member. 

- Simple jacket removing without fiber damaging 

- Made of zinc alloy steel with PVC non-slip handle. 

- Improve cable splicing, more efficient and easy to use. 

- Lightweight and compact. 

Description: Fiber Optical Power Meter

Description: Visual Fault Locator

* Easy to check fiber faults with visual red laser light

* Universally connector for test different ST,SC,FC interfaces

* Test for both single-mode and multi-mode cables with optional 2.5mm fiber optic(Standard) connectors to 1.25mm adapter(Optional)

* High effective power circuits allow for stable laser power

* Operates in both CW(Continuous wave) and pulse mode

* Dust-proof design keep fiber connectors clean

* Providing 15 hours of stable continuous operation

* Output power: 10mW

* Spectral width: 650+/-10nm

* Range: visibility up to 10km

* Operatiing temperature: -10 to +70C

* Store temperature: -40 to +85C

* Length: 6.3in(160mm)

* Weight: 170g(excluding batteries)

* Connector: 2.5mm universal adapter

Description: Fiber Optic Kevlar Cutter

* Telecommunication System

* Testing Equipment

* CATV System

* Long-haul Telecommunication

* LAN System

• Blades made of high carbon alloy steel with  vanadium and molybdenum FHRC60-62,cutting adge hardness FHV1200

• Handles made of thermo plastic elastomer

• Exteded tang for durability

• Serrated blade for gripping materials

• Specially designed for cutting kevlar materials

Package include:

1 x Fiber Tool Kits Bag                                                                                      

1 x FC-6S Fiber Optical Cleaver                                                                       

1 x CFS-2 Fiber Optic Stripper                                                                         

1 x FTTH Drop Cable Stripper                                                                          

1 x Optical Power Meter                                                                                    

1 x Visual Fault Locator                                                                                     

1 x Fiber Optic Kevlar Cutter                                                                                       

1 x Alcohol Bottle                                                                                                

1 x Screwdriver                                                                                                   

1 x Cotton Swab                                                                                                  

20pcs x  Protection Tube

1.Advanced production and testing equipment.
2.Professional manufacturer, 100% tested.
3.Full compliance with ISO 9001:2008 quality management system.
4.Our company has experienced professional team.
5.Provide reliable solutions and satisfactory services.
6.Warmly services with careful attentions.
7.Can provide your specific inquiry within 24 hours.Advanced production and testing equipment.

WeUnion Communication Technology Co., Ltd. is a professional manufacturer focuses on development, production, and sales of fiber telecommunication product. We provide Fiber Optic Cable, Fiber Patch cord, fiber pigtail, Optic PLC splitter, Fiber Distribution Boxes and relevant products which are widely used in FTTX, LAN, WAN, G-Pon, E-Pon Project. Our company has advance production and test equipments, strict production and quality control system, and stable supply chain. We are fully compliant with ISO9001: 2008 quality management system, we guarantee that our products are IEC60794 and Telcordia-GR-326-Core standard compliant, also compliant with our customers’ varied requirements.

Our company has rich experienced professional team and is committed to providing customers with reliable solution and satisfactory services. Through continuous development and expansion of our company, we now have customer around the world, especially in North America, South America, Europe, and Asia. Our products and services have been well received by customers. In the future, we will continue to provide customers with safe and reliable FTTX solutions.

Q1. Do you provide sample service?
A: Yes, we provide free or low price samples for you to test and check quality. Mixed samples are acceptable.
 
Q2. What about the MOQ?
A: Most products have a minimum order quantity, but some stocks can accept small orders.
 
Q3. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT international express service. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
 
Q4: How long is the guarantee of the product?
A: According to the type of product,We offer 1-3 years warranty to our formal products.
 
Q5: What about delivery time?
 A: We need 1-3 days to handling the sample, and 5-15 days to process our normal goods.