JYJXC-220/220 type has pole strengthened contact relay

product description

There is a pole strengthened contact relay: JYJXC-220/220

Product Features

The JVJXC-220/220 type has a pole reinforced contact relay used as a two-start relay in the signal switch control circuit.

Product Usage

The JVJXC-220/220 type has a pole reinforced contact relay used as a switch control relay in a signal circuit.

Features

1. The relay is designed according to the needs of the bistable circuit in the signal circuit. Permanent magnets are added to the magnetic circuit system of the relay, so that the relay has two stable states of positioning and reverse due to the different polarity of the current in the coil. These two stable states can continue to be maintained after the current in the coil disappears.

2. The use of silver-silver oxidation requires contacts, which has the characteristics of strong anti-adhesion and low contact resistance.

3. The relay contact system is composed of common contacts and reinforced contacts. There are two sets of positioning and reverse conversion common contacts, and two sets of positioning and reverse conversion reinforced contacts with arc-extinguishing magnets. The strengthened contact of the relay is specially designed for turning on the high current of the switch point machine.

4. The rated voltage of the relay is DC 24V.

Applicable environment

a) Ambient temperature: -40℃~+60℃;

b) Relative humidity: not more than 90% (temperature +25℃);

c) Air pressure: not less than 70kPa (equivalent to an altitude below 3000m);

d) Vibration: the vibration frequency is not more than 15Hz, and the amplitude is not more than 0.45mm;

e) Working position: horizontal;

f) There should be no harmful gas causing explosion hazard around, and good dust-proof measures should be taken.

Dimensions

Relay: 165mm×49mm×163mm (length×width×height)

Socket: 157mm×48mm×22mm (length×width×height)

Installation method

The relay socket is installed on the combination frame (cabinet) with bolts, and the relay is inserted into the socket horizontally and clamped with a hanging spring.

Relay identification pin numbers 15, 54.

Applicable characteristics Mechanical characteristics