29/5000 PEEK plate # PEEK # PEEK rod # PEEK pipe # engineered plastic

Polyether ether ketone; when the temperature reached 260 degrees before the material has excellent dielectric properties. And Resistant to energy radiation. Peek is made up of 4, a new semi-crystalline aromatic thermoplastic engineering plastics was prepared by the condensation reaction of 4’-difluorobenzophenone with Hydroquinone in the presence of Alkali carbonate using diphenylsulfone as solvent. Product description: C makes it a very versatile high-grade plastic. Peek Board General has the following models: PEEK-1000(Brown Gray) : PEEK-1000 uses pure polyetherketone resin as raw material, in all PEEK class toughness, impact resistance is good. The PEEK-1000 can be sterilized in a convenient manner (steam, dry heat, ethanol and y rays) , and the raw materials used to make the PEEK-1000 comply with EU and US FDA regulations on food suitability, which make it suitable for very common use in the medical, pharmaceutical and food processing industries. PEEK-HPV (black) : the result of adding PTFE , graphite, and carbon fiber to make PEEK-HPV a bearing grade plastic. Its superior friction properties (low coefficient of friction, wear resistance, high peak pressure limit) make this grade an ideal material for friction applications. PEEK-GF30(brown-gray) : this material is filled with 30% glass fiber reinforced plastic, has better rigidity and creep resistance than PEEK-1000, as well as better dimensional stability, making structural parts ideal. It can bear a fixed load for a long time at high temperature. If PEEK-GF30 is used as sliding part, its adaptability should be checked carefully, because the glass fiber scrapes the mating surface. PEEK-CA30(black) : the material is filled with 30% carbon fiber reinforced, has better mechanical properties (Higher Modulus of elasticity, mechanical strength and creep) and is more resistant to wear than PEEK-GF30, and carbon fiber reinforced plastics have 3.5 times the thermal conductivity of unreinforced Peek plastics-dissipating heat from bearing surfaces faster. Peek board main features: The air allows very high working temperature (260 degrees to continue to work, short-term up to 310 degrees) , high mechanical strength, rigidity and hardness, high temperature resistance, excellent chemical resistance and hydrolysis resistance, excellent wear resistance and friction properties, extremely high tensile strength, excellent dimensional stability, excellent resistance to ultraviolet radiation, excellent resistance to high energy radiation, inherent low flammability, and in combustion smoke less. PEEK PLATE APPLICATION FIELDS: Peek in aerospace, medical, semiconductor, pharmaceutical and food processing industries have been very common applications, such as satellite gas plate instrument components, Heat Exchanger Blade; because of its superior friction performance, in the friction application areas as an ideal material, such as sleeve bearings, sliding bearings, valve seats, seals, pump wear rings. Parts for various production lines, semiconductor liquid crystal manufacturing device parts, inspection device parts, manufacturing fixture, atomic energy related parts, electronic component, various precision machine parts, food processing line related parts, chemical machinery equipment related parts, welding machine related parts, gold plating processing machine related parts, metal surface treatment related parts, insulation parts, etc. . Peek Plate Size: 5-100 mm * 610/1000 mm * 1000 mm * currently there is no domestic production of PEEK plate manufacturers, mainly rely on imports. The origin of Germany, the United States, Japan and other places. Guangzhou Yaliyan Plastic Co. , Ltd. is located in the scenic Baiyun Mountain, Guangzhou, is specialized in a variety of engineering plastic semi-finished products. Product, Insulation Material Technology Research and development, production and sales of integrated enterprises. The company has been with domestic and foreign professional manufacturers of engineering plastics, insulation materials manufacturers to maintain a good partnership, in order to meet the needs of our customers in various aspects of development, agents of Taiwan, Germany, the United States, Korea, Japan, Switzerland and other countries, engineering plastics, insulation material plate, bar. Pipe. The company has always been adhering to the “Brand first, technology-based, quality-oriented, Standard Development”business philosophy, customer satisfaction-oriented business philosophy and “Quality assurance, Customer First”quality philosophy, committed to consolidating the brand, continuous development of new products, integrity services, quality and credit-based. To strengthen cooperation with the majority of customers, establish good relations. The company’s products include a variety of plastic plate, plastic film, plastic rods, industrial plastic products and a series of plastic materials. IMPORTED PLASTIC MATERIALS: Peek Plate/stick, PVDF Plate/stick, PPS plate/stick, CPVC PLATE/PTFE plate/stick, Pei plate/stick, PBI plate/stick, Pai plate/stick, Pi Plate/stick, PSU plate/stick, PES plate/stick, PPO plate/stick, PETP plate/stick, PBT plate/stick, UPE plate/stick, ABS plate/stick, POM Plate/stick, POM-esd plate/stick, PA plate/stick, PE plate/stick, PP plate/stick, Pu plate/stick, PC plate/stick, etc. . General Engineering Plastics: Acrylic Plate, plexiglass plate, ABS plate/bar, POM Plate/bar, PP plate/bar, PE Plate/bar, PS Plate/bar, PVC Plate/bar, etc. Plate, Bar, pipe. HIGH TEMPERATURE INSULATION MATERIALS: Red Black Bakelite Board, epoxy, cloth Bakelite, cold punching, phenolic laminates, rods; FR-4 fiberboard, synthetic stone, high temperature asbestos board, MICA board. Welcome to call to discuss