0.8 mm~5.0 mm Sino Erli MG316 mig Co2 stainless steel 316 solid welding wire ER316 S316

The main component of the welding wire is 18Cr-12Ni-2Mo, which is stainless steel MIG welding wire. It can be welded in all positions. Excellent welding workability-smooth wire feeding, stable arc, beautiful shape, and very little spatter. Because it contains Mo, it has excellent corrosion resistance to acetic acid, sulfurous acid, phosphoric acid and salts.
It is often used in the welding of petrochemical and fertilizer equipment, such as 06Cr17Ni12Mo2 (SUS 316) and other materials.

Attention:

1. Shielding gas: pay attention to the purity of the shielding gas, the recommended mixture ratio is Ar+1~3%O2.
2. Gas flow: 20~25L/min.
3. Extension elongation: 15~25mm.
4. Remove the rust, moisture, oil, dust, etc. from the welding part.
5. When welding outdoors, wind-proof measures should be taken when the wind speed is greater than 1.5m/s, and appropriate wind-proof measures must be taken to prevent air holes.
The above suggestions are for reference only, and the actual conditions on site shall prevail in specific operations. If necessary, perform process qualification firstly and then determine the welding plan