Jiangsu Acrel Electrical Manufacturing CO.,LTD: Wuxi, Jiangsu, China; Main products: power sensor, programmable power meter, DC power analyzer, Data center monitor device, Din rail energy meter, Isolated power supply, wireless temperature sensor , IOT?energy?meter , split core current transformer

Home
Product Categories

Multifunction Power Meter

Data Centre Monitoring

Temperature Monitoring

Smart Temperature And Hunidity Controller

Remote Terminal Unit

DIN Rail Energy Meter

IOT Wireless Energy Meter

PV/Solar Inverter Energy Meter

EV Charging Meter

DC Power Meter

Prepaid Energy Meter

Current Transformer

Hall Sensor

Protection Relay For Medium-Voltage Applications

Smart Motor Protector

Earth Leakage Relay

IT Power Distribution

Active Power Filter

Smart gateway

Ungrouped

Single phase din rail energy meter

Battery Monitoring device
Company Profile

Company Introduction

Photo Gallery
Blog
Quality Control
Contact Us

Home > Products > Multifunction Power Meter > Acrel AMC72L-AI3 3 phase LCD programmable current meter with RS485 modbus rtu

Acrel AMC72L-AI3 3 phase LCD programmable current meter with RS485 modbus rtu

FOB Price

US$ 56 - 56 / Piece

1 Piece(Min. Order)

Payment TermsT/T Credit Card

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Details

Brand Name	ACREL	Place of Origin	China
Model Number	AMC72L-AI3	Operating Temperature	-10~55
Dimensions	75*75mm	Measuring Voltage Range	~9999~+9999
Measuring Current Range	0-999999	Accuracy Class	0.5

Product Description

General

AMC Series electric meter

AMC72L-AI3 Programmable Intelligent Electric Parameter Meters--Three phase current

Adopting AC sampling technology, can measure many single phase or three phase grid electrical parameters such as current, voltage, power, electric energy etc. directly or indirectly. It can be used for local display, and also can be connected with the control equipment to form measuring and controlling system.
Fitted with RS-485 communication port, adopting Modbus-RTU protocol. Meters can switch electric parameter signal into standard analog output, with four-channel (two-channel) switching input / two-channel switching output. Based on different requirements, by keys on the faceplate, electric parameters for transformation ratio, alarm, communication etc. can be set up and controlled.

Function

Parameters
Technical Parameter
Value


Input
Rated Value
AC voltage:Single phaseAC 100V,400V
Three phaseAC 100V,400V,660V(UL-L,Only 72/ 96)
AC current:AC1A,5A;
DC voltage:1000V,300V,75mV,10V;
DC current: 0-20mA,4-20mA,5A;
Overload
Voltage: 1.2 times rated value(continuous); 2 times rated value /1 second
Current:1.2 times rated value(continuous); 10 times rated value /1 second
Frequency
45Hz～65Hz
Power Consumption
Power consumption of each voltage,current input circuit is less than 0.5VA
Accuracy
Class 0.5


Function
Display
LED or LCD
Communication
RS485,Modbus-RTU protocol;(1 start bit,8 data bit,1 stop bit,no parity)
Baud Rate 2400/4800/9600/19200 bps etc.
Alarm
1 channel passive relay,contact capacity 3A/30VDC,3A/250VAC, Used for high,low,unbalance alarm etc.
Analog
DC4~20mA,( load<500Ω)
(note:Shielded wire is specially selected for the above signal input and output)
Switching
Input:4 channel or 2 channel dry contact Input,built in power supply
Output:2 channel switching output,NO relay contact,capacity:3A/30VDC,3A/250VAC
Auxiliary Supply
AC/DC 85-265V
Power Consumption
<5VA
Insulation resistance
≥ 100MΩ
Power frequency withstand voltage
Between power supply set of terminals and signal input,output set of terminals 2kV/1min (RMS)
Between the shell and all set of terminals(except the set of terminals reference voltage less than 40V) AC 4kV


Environment
Temperature
Operation: -10℃～+55℃Storage: -25°C ~+70°C
Humidity
≤95%RH,no condensation,without corrosive gas
Altitude
≤ 2500m

FAQ

Q: No display on power?
A: Check whether the supply voltage is within the operating voltage range.

Q: Incorrect reading of voltage,current,electricty,etc?
A: Checking that the voltage/current ratio setting are correct;
 Checking whether the wiring mode setting is consistent with the actual situation;
 Checking whether the voltage transformer and current transformer are in good condition.

Q: Abnormal communication?
A: Check whether the adress,baud rate,check bits in the communication;
 Setting are consistent with the host computer;
 Check whether the RS485 converter is normal;
 Check the connection is corrent if the resistor above 120 ohm is connected in parallel at the communication end.

Contact Us

Jiangsu Acrel Electrical Manufacturing CO.,LTD: Contact nameTim
Chat Now; Phone86-1870-6168051; AddressJiangyin, Wuxi, Jiangsu

*Email
Please enter Your valid email address.
*To

Tim
*Message
Your inquiry content must be between 20 to 5000 characters.
Please enter a correct verification code.

Product Categories

Multifunction Power Meter	Data Centre Monitoring	Temperature Monitoring	Smart Temperature And Hunidity Controller
Remote Terminal Unit	DIN Rail Energy Meter	IOT Wireless Energy Meter	PV/Solar Inverter Energy Meter
EV Charging Meter	DC Power Meter	Prepaid Energy Meter	Current Transformer
Hall Sensor	Protection Relay For Medium-Voltage Applications	Smart Motor Protector	Earth Leakage Relay
IT Power Distribution	Active Power Filter	Smart gateway	Ungrouped
Single phase din rail energy meter	Battery Monitoring device

Acrel AMC72L-AI3 3 phase LCD programmable current meter with RS485 modbus rtu

You May Like

Product Details

Product Description

Contact Us

Product Categories

New Products

Popular Searches

Recommended Products

Find Similar Products By Category

Product Tags:

Technical Parameter		Value
Input	Rated Value	AC voltage:Single phaseAC 100V,400V Three phaseAC 100V,400V,660V(UL-L,Only 72/ 96) AC current:AC1A,5A; DC voltage:1000V,300V,75mV,10V; DC current: 0-20mA,4-20mA,5A;
	Overload	Voltage: 1.2 times rated value(continuous); 2 times rated value /1 second Current:1.2 times rated value(continuous); 10 times rated value /1 second
	Frequency	45Hz～65Hz
	Power Consumption	Power consumption of each voltage,current input circuit is less than 0.5VA
Accuracy		Class 0.5
Function	Display	LED or LCD
	Communication	RS485,Modbus-RTU protocol;(1 start bit,8 data bit,1 stop bit,no parity) Baud Rate 2400/4800/9600/19200 bps etc.
	Alarm	1 channel passive relay,contact capacity 3A/30VDC,3A/250VAC, Used for high,low,unbalance alarm etc.
	Analog	DC4~20mA,( load<500Ω) (note:Shielded wire is specially selected for the above signal input and output)
	Switching	Input:4 channel or 2 channel dry contact Input,built in power supply Output:2 channel switching output,NO relay contact,capacity:3A/30VDC,3A/250VAC
Auxiliary Supply		AC/DC 85-265V
Power Consumption		<5VA
Insulation resistance		≥ 100MΩ
Power frequency withstand voltage		Between power supply set of terminals and signal input,output set of terminals 2kV/1min (RMS) Between the shell and all set of terminals(except the set of terminals reference voltage less than 40V) AC 4kV
Environment	Temperature	Operation: -10℃～+55℃Storage: -25°C ~+70°C
	Humidity	≤95%RH,no condensation,without corrosive gas
	Altitude	≤ 2500m