Galvanized Soft 1.0mm 16cm 20cm Copper Tie Wire

Copper Steel Rod Binding 380Mpa BWG12 SAE1008 Metal Tie Wire

Metal Tie Wire introduction

Metal tie wire is also known as tie wire or binding wire. It is easy to operate, therefore it's widely uses in binding of different materials, especially for daily use. The main materials of loop tie wires are galvanized iron wire, black annealed iron wire, PVC-coated iron wire and copper wire.

Types: copper double loop tie wire, galvanized double loop tie wire, PVC coated double loop tie wire, stainless steel double loop tie wire, etc.

PVC coated color: green, blue, black, yellow, red, etc.

Wire diameter: 0.7 mm - 4 mm.

Length: from 4" - 24".

Wire diameter and lengths can be made according to your needs.

the common one is 16 gague black annealed double end loop tie wire, with length 6'

• packaged in 500, 1000, 2000, 5000 pieces/bundle, then in gunny bag or carton, or by pallets

• Material low carbon steel wire

• Feature It is easy to operate, enhances the working efficiency reduces pollution

• Use The loop wire es as a binding wire used in packing or construction

• Used as tie wires to bind bags and rebars.

• Used in the family garden to bind branches of plants.Securing trees, wines and creepers o supports and trellises

• Applied in the farm to bundle twigs.

• erecting and joining support structur

• Tying bags or as a ma or laundry bag seal

• Finish of loop tie wire can be black annealed loop ie wire. galvanized loop te wire or PVC coated loop wire.

• Small coil wire tie finds most uses in binding of different materials especially for daily use

Metal Tie Wire specification as blows :

Metal Tie Wire Features

• 1: exhibit attractive properties as high strength and ductility, good corrosion resistanc

• 2: clean and convenient

• 3: unbreakable, Tensile strength is 300-380mpa

• 4: durable , After high temperature treatment, the ductility can reach 15% - 20%

• 5: easily twist , Raw material annealed 3 times, better flexibility, so it is easier to twist binding

Metal Tie Wire Process :

First, the raw material is wire rod Q195, which is processed and thinned. In the second drawing process, the wire diameter required by the customer is reached. At this time, it is about 100kg / plate. Put the wire in the heating furnace for heating and annealing treatment

Metal Tie Wire Packaging Details

1. Bundled together by tie wire.

2. plastic inside and cartons outside.

3. plastic inside and woven bags outside.

4. water-proof paper inside and woven bags outside

5. or as your demand