- Pego Electronics (Yi Chun) Company Limited
- Main products: electric safety testing machine, , IEC & UL test probe, gauges, impact test machine, environment testing machine
Home > Products > EMC Generator > IEC61000-4-5 10KV Surge Simulator with 1.2us and 50us waveform
IEC61000-4-5 10KV Surge Simulator with 1.2us and 50us waveform
- Shenzhen
- T/T
- 15 days
You May Like
-
Ground Resistance Tester
-
IEC60695-2-20 Hot Wire Ignition Test Apparatus
-
IEC60335-2-17 clause 21.102 Blankets Mechanical Strength test Apparatus
-
Digital Charpy Impact Strength Tester Meet requirements of ISO179-2000
-
ISO180-2000 Digital Izod Impact Strength Tester with 3.5m/s Impact Speed
-
IEC60068-2-75 Calibration Device for Spring Hammer Calibration Device
Product Details
| Brand Name | Pego | Place of Origin | China | |
| Model Number | LSG-1020 | Power | Electronic | |
| Usage | Other, EMC testing |
Product Description
IEC61000-4-5 10KV Surge Simulator with 1.2us and 50us waveform
1. Introduction
The LSG-1020 Surge Generator is a auto equipment designed according to IEC61000-4-5 and GB/T17626.5,and completely meet the requirements of the standards. It is widely used in the fields of industry control equipment, house-holding appliance, medical electronics, communications electronics,components, auto control equipment and etc.
2. Features
● 7 inch LCD touch screen, with plentiful functions, easy to operate and update the software.
● Programmable, with 1000 groups memories
● Built-in voltage and current monitor to obtain breakdown voltage and current at real time.
● Built-in EUT working voltage and current monitor, protect at overvoltage and overcurrent.
● Built in overvoltage, overcurrent and short circuit protection.
● Voltage error and no output warning.
● Intelligent judge the abnormal of voltage and surge output.
3. Parameter
Output voltage (open) | 0.2－10kV ±5％ | |
Front time | 1.2μs ±30％ | |
Time to half-value | 50μs ±20％ | |
Output current (short) | 5kA±5％ (max) | |
Front time | 8μs ±20％ | |
Time to half-value | 20μs ±20％ | |
Output polarity | Positive, negative, positive/negative automatically | |
Output impedance | 2Ω±10％, 500Ω±10％ | |
Trigger mode | Synchronization, asynchronization | |
Inject phase | Freely set at 0－360°，resolution:1° | |
Trigger mode | Auto or manual, single | |
Surge times | 1-9999 times | |
Memories | 1000 groups, built in IEC standard | |
Surge interval | 30-9999s | |
Built-in surge voltage monitoring attenuation ratio | 1000:1 | |
Built-in surge current monitoring attenuation ratio | 1000:1 | |
Built in network capacity | 3 phase, 380V/20A | Single phase, 300V/16A (AC, DC) |
Coupling mode | L1-N,L2-N,L3-N, L1-PE,L2-PE,L3-PE,N-PE | L-N,L-PE, N-PE, L+N-PE |
Coupling Components (built-in) | 18μF capacitance (L-N), 10Ω resistor+9μF capacitance (L-PE) | |
Working environment | Temperature:15°C－35°C humidity:10%－75% | |
Power supply | AC220±10%，50/60Hz | |
Weight | 270kg | |
Dimension | 600mm (L)*500mm(W)*1500mm(H) | |
4. Working principle and waveform
4.1: 1.2/50ms, 8/20ms equivalent circuit
4.2: Voltage waveform (open circuit)
Frontier time: T1=1.67T=1.2ms±30%
Time to half-value: T2=50ms±20%
4.3: Current waveform (short circuit)
Frontier time：T1=1.25T=8ms±20%
Time to half-value:T2=20ms±20%
Contact Us
- Pego Electronics (Yi Chun) Company Limited
- Contact nameAlice Chat Now
Product Categories
New Products
-
IEC60068-2-75 IK02 Spring Hammer for 0.2J Impact Testing
-
IEC61000-4-5 Combination Wave Surge Generator with 6KV Output Voltage
-
EN60350-2 Figure 1 Standard Vessels for Cookware
-
GB21456 Low Carbon Steel Test Pans with Calibration Certificate issued by ISO17025 Lab
-
Hob Element meets the Requirements of IEC60335-2-6 and IEC60335-2-9 Chapter 21
-
IEC60335-2-9 Low Carbon Steel Test Vessels for Testing Induction Hotplates
-
IEC60335-2-9 Aluminum Test Vessels for Testing Hotplates
-
IEC60884-1Maximum and minimum withdrawal force Test Apparatus
-
IEC60884-1 Power Cord Anchorage Torque Test Apparatus
-
IEC60065 Figure 11 Plug Torque Test Apparatus
-
IEC60695-2-10 Lab Testing Machine Glow Wire Tester
-
Wall Mounted IPX1/2 Waterproof Testing Machine Meets the Requirements of IEC60529 Standard
-
IEC60068-2-75 IK01 to IK06 Impact Testing Machine Spring impact hammer
-
IEC61000-4-2 Electrostatic Discharge Generator
-
IEC61032 Jointed Finger Probe for IP2X Testing with CNAS Calibration Certificate
-
Calibrated IEC60529 IP5X and IP6X Sand Dust Chamber
-
IEC60068-2-75 IK07-IK10 Pendulum Impact Hammer Test Apparatus
-
IEC60335 Finger Nail Probe with 50N Thruster and CNAS Calibration Certificate
-
IEC60529 IPX34 Hand-held Spray Nozzle with 121 holes and Brass Nozzle
-
IEC61000-4-5 Lightning Surge Genenator with 6KV Output Voltage
-
IEC60695-11-5 Needle Flame Tester with 0.5mm Thermocouple
-
IEC60112 Tracking Index Tester for PTI and CTI Testing
-
UL94 Horizontal and Vertical Flame Test Apparatus
-
IEC60950-1 High Current ARC Ignition Test Apparatus
Popular Searches
Recommended Products
- Handheld ultrasonic concrete crack scanner Ultrasonic testing for hidden cracks in concrete Real-time concrete crack monitoring system
- Automated crack mapping with UPV Best ultrasonic crack detector for concrete Price of portable UPV crack measurement tool
- Time-of-flight (TOF) crack depth measurement Surface wave testing for crack detection Digital ultrasonic concrete testing device
- Tunnel & dam crack inspection with UPV Building structural crack assessment tool Ultrasonic pulse echo for concrete cracks
- Bridge inspection ultrasonic crack detector Concrete slab crack measurement equipment Highway pavement crack depth analyzer
- Portable ultrasonic concrete crack gauge Non-destructive ultrasonic crack depth tester Concrete crack width and depth measurement tool
- Ultrasonic concrete crack depth meter Ultrasonic pulse velocity (UPV) crack detector NDT ultrasonic crack measurement device for concrete
- Handheld device for measuring surface cracks Automated crack detection system for quality control Real-time crack monitoring equipment
- High-precision ultrasonic crack detector price Compare crack width measurement systems NDT crack detection equipment suppliers
- 3D scanning for crack depth analysis Best crack depth measurement device for industrial use Affordable portable crack inspection tool
- Time-of-flight diffraction (TOFD) crack measurement Laser-based crack width measurement Digital microscope for crack analysis
- Metal fatigue crack testing device Railway track crack inspection equipment Phased array ultrasonic testing (PAUT) for cracks
Find Similar Products By Category
- Instruments & Meters > Test Instrument > Test Machine
Product Tags:
Pego Electronics (Yi Chun) Company Limited
Business license
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Alice
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile