- Pego Electronics (Yi Chun) Company Limited
- Main products: electric safety testing machine, , IEC & UL test probe, gauges, impact test machine, environment testing machine
Home > Products > Electric Safety Test Machine > IEC60884-1 Figure 28 Apparatus for Abrasion Test on Insulating Sleeves of Plug Pin
IEC60884-1 Figure 28 Apparatus for Abrasion Test on Insulating Sleeves of Plug Pin
- 1000 Set / Sets per Month
- Shenzhen
- T/T
- 15 days
You May Like
-
IEC61000-4-4 EFT-5K16 Electrical Fast Transient Generator
-
IEC61000-4-4 Capacitive coupling clamp for EFT Generator
-
IEC61000-4-5 10KV Surge Simulator with 1.2us and 50us waveform
-
Ground Resistance Tester
-
IEC60695-2-20 Hot Wire Ignition Test Apparatus
-
IEC60335-2-17 clause 21.102 Blankets Mechanical Strength test Apparatus
Product Details
| Brand Name | Pego | Place of Origin | China | |
| Model Number | PG-ATA | Power | Electronic | |
| Usage | Abrasion Tester |
Product Description
PG-ATA Apparatus for Abrasion Test on Insulating Sleeves of Plug Pin
1. Introduction
Apparatus for abrasion test on insulating sleeve of plug pin is designed according to IEC60884-1 figure 28 and BS1363 figure 9, it is applied to test abrasion resistance performance of insulating sleeves of plug pin. The test apparatus is consisted by horizontally placed beam and a linear motion clamp, the U sharp steel wire with diameter of 1mm is vertically fixed at the end of the horizontal beam, the U-shaped bottom edge of the wire is 6mm linear working part, press the U-shaped wire 6mm straight bottom edge on the bolt insulation sleeve, the motor drives the clamp with the pin to back and forth, so that the wire and the insulating sleeves of plug pin to do the abrasion test. After the test,the plug pin shall be free from damage that may affect safety or affect future use, especially the insulating sleeves can not worn or wrinkled.
2. Parameter
Working station | 1 |
Working times | 1~999999 (presettable) |
Abrasion frequency | 30 times/min, back and forth count as 1 time |
Pressure load | 4N |
Travelling | 9mm, about 7mm is abrasion insulating sleeve |
Abrasion steel wire | Φ1mm, effective length 6mm |
3. Figure:
Contact Us
- Pego Electronics (Yi Chun) Company Limited
- Contact nameAlice Chat Now
Product Categories
New Products
-
Digital Charpy Impact Strength Tester Meet requirements of ISO179-2000
-
ISO180-2000 Digital Izod Impact Strength Tester with 3.5m/s Impact Speed
-
IEC60068-2-75 Calibration Device for Spring Hammer Calibration Device
-
IEC60068-2-75 IK02 Spring Hammer for 0.2J Impact Testing
-
IEC61000-4-5 Combination Wave Surge Generator with 6KV Output Voltage
-
EN60350-2 Figure 1 Standard Vessels for Cookware
-
GB21456 Low Carbon Steel Test Pans with Calibration Certificate issued by ISO17025 Lab
-
Hob Element meets the Requirements of IEC60335-2-6 and IEC60335-2-9 Chapter 21
-
IEC60335-2-9 Low Carbon Steel Test Vessels for Testing Induction Hotplates
-
IEC60335-2-9 Aluminum Test Vessels for Testing Hotplates
-
IEC60884-1Maximum and minimum withdrawal force Test Apparatus
-
IEC60884-1 Power Cord Anchorage Torque Test Apparatus
-
IEC60065 Figure 11 Plug Torque Test Apparatus
-
IEC60695-2-10 Lab Testing Machine Glow Wire Tester
-
Wall Mounted IPX1/2 Waterproof Testing Machine Meets the Requirements of IEC60529 Standard
-
IEC60068-2-75 IK01 to IK06 Impact Testing Machine Spring impact hammer
-
IEC61000-4-2 Electrostatic Discharge Generator
-
IEC61032 Jointed Finger Probe for IP2X Testing with CNAS Calibration Certificate
-
Calibrated IEC60529 IP5X and IP6X Sand Dust Chamber
-
IEC60068-2-75 IK07-IK10 Pendulum Impact Hammer Test Apparatus
-
IEC60335 Finger Nail Probe with 50N Thruster and CNAS Calibration Certificate
-
IEC60529 IPX34 Hand-held Spray Nozzle with 121 holes and Brass Nozzle
-
IEC61000-4-5 Lightning Surge Genenator with 6KV Output Voltage
-
IEC60695-11-5 Needle Flame Tester with 0.5mm Thermocouple
Popular Searches
- Resistance Tester
- lab equipment
- testing equipment
- testing machine
- Impact Tester
- test equipment
- testing instrument
- Test Machine
- test bench
- Contact Resistance Tester
- tensile strength tester
- Pilling Tester
- din abrasion tester
- abrasion testing machine
- Fabric Abrasion Tester
- wear tester
- tearing resistance machine
- tearing strength tester
- tearing tester
- Tablet Friability Tester
- Universal Abrasion Tester
Recommended Products
- paint and metal cupping tester for export
- ISO 1520 cupping index tester supplier ISO 20482 cupping depth tester manufacturer
- dual standard cupping testing machine ISO 1520 ISO 20482 universal cupping tester for coating and metal standards
- EN ISO 1520 compliant cupping test machine cupping tester for ISO 1520 and ISO 20482
- JIS K 5600-5-1 cupping test machine EN ISO 1520 cupping tester EN standard coating flexibility tester
- ASTM coating deformation tester paint flexibility testing equipment JIS K 5600
- DIN 53166 compliant cupping tester ASTM cupping tester ASTM D4175 cupping test machine
- ISO 20482 formability test machine DIN 53166 cupping tester paint film cupping testing machine
- ISO 20482 ductility testing machine Erichsen cupping test equipment metallic materials cupping tester
- ISO 1520 compliant cupping testing machine ISO 20482 metal cupping tester sheet metal cupping test machine
- ISO 1520 lacquer cupping test equipment standard paint film deformation tester paints and varnishes cupping tester
- ISO 1520 cupping tester paint cupping test machine coating flexibility tester
Find Similar Products By Category
- Instruments & Meters > Test Instrument > Test Machine
Product Tags:
Pego Electronics (Yi Chun) Company Limited
Business license
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Alice
Welcome to my shop, I'm glad to serve you. Please feel free to send me any questions you may have.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile