Oil Mist Detection System

Oil Mist Detection System

Function introduction

Oil mist detection system AIS-OMD16 is a new style monitor and control system.The system is capable of real-time monitoring a variety of oil mist inside the crankcase of diesel engine, and then to assess the state of cranking driving bearings and piston assembly.

Charaeters of the system

1.The sensor of the system uses reliable oil splash-prevention system.

2.If the sensor is contaminated or out of order, it can be detected and identified by the

system automatically.

3.Since there is no motive or mechanical part in the whole system,it greatly enhances

the service life of the system.

4. If the alarm is trigged,the alarmed diesel engine block can be confirmed directly.

5. The system can treat and analyze the oil mist and then indicate the state of the oil mist.

6. Operates simply

Technical parameters

1.Supply voltage: 24V± 20% 2.Operation temperature: 0-70℃C 3.Storage temperature:-25-85℃C 4.Protection class: IP65

5.Max. no. of sensor access: 16pcs

6.Measurement class: the system has 10adjustable levels of measurement from0.2mg/Lto 10mg/L

7.System state indication: thenormalstate,pre-alarm,alarm and dirty are indicated by four LEDs.

8.Display: the data and therelative parameters measured bya variety of sensors are

centralized displayed with 320*240 dot matrix LCD

9. Relay output: max.relay load:60VAC,1A,60VA/60V DC,1A,60W

10. Serial interface:RS485 industry-standard duplex communication

RS232 used for setting up and disposition